MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

What is this?
Ver tema anterior :: Ver tema siguiente  


Reply

I finished 3 rolls of film, and dropped it off at Wallies to later find that their
processor had broken down and had only 2 rolls developed. The roll from
the Canonet was fine, but this roll from the Contaflex IV was definitely
not. Is this a camera leaking light, or a processing issue?







Here's one from the Canonet, just winging on Sunny 16 settings:



There was some play in the back cover of the Canonet and I thought
I would see light leaks, but no. Both rolls that were processed are
Arista 100 film, the cheap stuff from Freestyle. The colors in the Canonet
shot are spot-on, late afternoon/almost dusk lit up the golden green of
the wheat field across the street from my home.

I'll take those three pics down after I hear a diagnosis, thanks. All I did
with the three is resize for web.

Bill


Editado por última vez por Katastrofo el Mar Mayo 20, 2008 7:55 am; editado 1 vez en total


Reply

curtain hang-ups?


Reply

themoleman342 escribió:
curtain hang-ups?


Could be, if the leaf curtains are sluggish? Hummmm.


Reply

Dark seals. Wink Looks like in more than one spot. How is the frame spacing. It looks like there may have been some slack between the cartridge and sprocket as well. I am not an expert but, this looks like a dark seal prob that I have had a couple times. Your canonet is a winner though Aye? Congrats on both. I bet that the contaflex will be humming along in no time


Reply

Andy, you're saying this is a lightseal problem? The back cover dogs down
like a deep sea diver's helmet. Dammit. I did the shutter curtain check as
per this guy last year when I got the cam, no issues, unless something
totally malevolent happened while sitting in an old armoire for close to a
year:

http://www.geocities.com/Colosseum/1522/my_zeiss.html

I didn't check to put tension on the roll when I loaded the film, and think
you have a good point about the film not advancing properly as the film
strip looks like it's advancing in half-frames and no frame spacing for a
good stretch of it. Shee-yott.

The Canonet rocks! I was taking bullshit pics around my home thinking
that it was the one that was leaking light as there was at least one mm
of play in the back cover. I think I'm going to like this cam a lot!

Bill


Reply

You Know Bill. You might just have a crap cartridge of film on your hands. Did you hand roll it or buy old stock? If you think the door is super snug than it probably is somthing else. Film is the next place I would look. If it was a shutter issue it would look different I think so likely safe there.


Reply

This is that cheap Arista film that Freestyle sells. It's the same film that I
used in the Canonet which had no issues. Now I didn't check for exp dates
on the canister, my bad, but it could be like you say, just a bad roll of
film. Hummm, again.

Bill


Reply

Did you say you took 3 rolls in but only 2 were returned developed because the machine broke down? So one roll was ruined completely and these pics come from one of the other two rolls? That makes it 2/1-on that the lab damaged two rolls, not just one.


Reply

Doesn't seem likely its a shutter problem with a Contaflex (I have a Contaflex Beta), as that has a between-lens leaf shutter, and if this is a shutter problem (hangup) it would be due to a focal-plane shutter. The Contaflex IV may be different though.

The Contaflex didn't have seals as such either. The thing locks up tighter than Fort Knox. I can't imagine a light leak in that.

I vote for a processing machine problem.

This is really annoying, to lose whole rolls. I just lost a roll in an Argus C44 because, stupid me, I wound through the end of the roll.

Nice Canonet. I have a 17 with a stuck shutter I'd like to get working. One of these days I'll try the flooding idea.


Reply

Peter, Luis, thanks for your comments.

Peter, they gave back the undeveloped roll so I'm thinking of having some
one else do the developing.

Setting the Contaflex on f22, B setting and pressing the shutter release it
sometimes closes all the way (if I press and release very quickly) or hangs up at f16-f22 somewhere when I do a slow release. I've been reading today about working on shutters with these cams and it is a total PITA, even for experienced repairmen. So I don't know what to think. The camera is in mint condition, beautiful shape otherwise, maybe it's always had this problem is why it's in such great cosmetic condition. But I'm a little more than reluctant to do any invasive therapy on this, for sure. I can leave the cam in my car on a sunny day and work the shutter after, to see if things will loosen up to where it closes like it's supposed to.

Luis, your Beta model and the BC model are sought after models, but
also a nightmare to work on. When I looked at the inside of the cam
today, I couldn't really see how you could install foam seals and be able
to dog down to close the camera, don't think it's a lightseal problem,
either.

Thanks again,

Bill


Reply

Luis, I hope you get your Canonet running again! Here's another scan from
that Arista 100 roll, taken at a better time of day for ISO 100:



Still can't believe this cam isn't leaking light with all the play in the film
door.

Using Sunny 16 and scanned at 2400dpi, Epson 4490.

Bill


Reply

Nice results with that Canonet !

Very sharp. The lens has a good reputation.

I don't remember mine being all that amazing way back when, but who knows, these judgements are so dependent on a roll or two.


Reply

Katastrofo escribió:
Peter, Luis, thanks for your comments.

Peter, they gave back the undeveloped roll so I'm thinking of having some
one else do the developing.

Setting the Contaflex on f22, B setting and pressing the shutter release it
sometimes closes all the way (if I press and release very quickly) or hangs up at f16-f22 somewhere when I do a slow release. I've been reading today about working on shutters with these cams and it is a total PITA, even for experienced repairmen. So I don't know what to think. The camera is in mint condition, beautiful shape otherwise, maybe it's always had this problem is why it's in such great cosmetic condition. But I'm a little more than reluctant to do any invasive therapy on this, for sure. I can leave the cam in my car on a sunny day and work the shutter after, to see if things will loosen up to where it closes like it's supposed to.


OK, but I still think this damage results from a processing problem. If the shutter is sticking open you would get areas of the image which are completely burnt out. Here you can see there was once a perfect exposure which has been damaged later, like a double exposure, so it looks to me as though the shutter must have closed properly when the shot was taken.

The pattern of the damage is interesting too, in repeating vertical bands I'm wondering if this isn't due to extraneous light but maybe over-development. Did you see my picture of the rooftop carpark with the lighter bands resulting from developing problems?


Editado por última vez por peterqd el Mié Mayo 21, 2008 7:14 am; editado 1 vez en total


Reply

Peter, I remember your thread, will look for it again. Yes, in the back of
my mind is the fact that their processor broke down and couldn't do the
third roll and munched-up roll #2 to find out their processor is malfunctioning.
The camera was getting pretty warm in the car before I got to the mountains
anyway, so I'm thinking most times the shutter was OK, maybe wrong here,
but the only way to find out is shoot another roll and not have this particular
Walmart do the developing. And you're right, the exposures look good
except for these bands of superimposed hash in the frames. I'm pretty
sick about how this roll turned out, I had hoped to see some great pics of
flowers, but nope, maybe next time.

Bill


Reply

Watch out for the black dog that appears on every picture:
http://www.stephenking.com/pages/works/Four_Past_Midnight/


Reply

kansalliskala escribió:
Watch out for the black dog that appears on every picture:
http://www.stephenking.com/pages/works/Four_Past_Midnight/


Probably something that won't make Finland's front page news, but the
church mothers in my country have finally gotten their way, and Stephen
King is being banished to Finland! Isn't that wonderful? You'll be able to
discuss the works of this writer with the man himself very soon!

Have a nice day...

Bill


Reply

Is it just me that love the effect? Except for the sharp lines that is? Kind of reminds me of old glassplate pictures that have faded.

I think they are lovely. Just crop out the straight lines. Wink


Reply

zewrak escribió:
I think they are lovely. Just crop out the straight lines. Wink


Thanks, zewrak, I'll get right on it... Laughing