MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Unknown lens mount, request for recognition
Ver tema anterior :: Ver tema siguiente  


Reply

Long ago in a set with different lenses, there was a modified minolta rokkor 50.1.7 for an unknown mount.
What is the lens mount?

More photos:

https://postimg.cc/gallery/ggzedur6/


#1


#2


#3


#4


Reply

siudym escribió:
Long ago in a set with different lenses, there was a modified minolta rokkor 50.1.7 for an unknown mount.
What is the lens mount?

Czołem! Smile
Considering the small diameter and the decreased F2F distance (register), I would guess that it's some sort of rangefinder mount (guess is the important word here).


Reply

siudym escribió:
Long ago in a set with different lenses, there was a modified minolta rokkor 50.1.7 for an unknown mount.
What is the lens mount?

Now the more I look at it, the more I suspect this is an Exacta mount (the key word here is suspect - some small progress on the road to certainty).


Reply

It is shaped like Exakta but is too small, and Exakta has a locking pin that I don't see in these pics.


Reply

If I interpret your photos correctly, then the diameter of the mount is 44mm, correct? This list:

https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html

lists mounts by register but also shows their diameter. If the converted lens is made to reach infinity focus, the register of the mount should be 8 to 10mm less than Minolta SR mounts 43.72mm. So maybe the original 4/3 mount (not micro)?