| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
connloyalist
 Registrado: 22 Jul 2020 Mensajes: 381 Ubicación: the Netherlands
|
 Publicado: Dom Mar 03, 2024 3:36 pm Asunto: Topcon's exakta mount |
|
 Publicado: Dom Mar 03, 2024 3:36 pm Asunto: Topcon's exakta mount |
|
|
connloyalist wrote:
Can someone help me with two questions with respect to Topcon lenses?
1) I seem to remember reading somewhere that Topcon's lenses longer than some focal length don't have a standard exakta mount but a variation. Could someone please fill me in on the details? Which Topcon lenses will work on a standard exakta mount and which one will not?
2) My understanding is that Topcon's UV lenses have an entirely different, non-exakta, mount and also don't have an aperture ring. Does that mean that any Topcon lens that does have an aperture ring does have an exakta mount (with the provision of question 1)?
Regards, C. |
|
| Volver arriba |
|
 |
BrianSVP
 Registrado: 09 Jun 2023 Mensajes: 664 Ubicación: Philadelphia
|
 Publicado: Dom Mar 03, 2024 3:42 pm Asunto: Re: Topcon's exakta mount |
|
 Publicado: Dom Mar 03, 2024 3:42 pm Asunto: Re: Topcon's exakta mount |
|
|
BrianSVP wrote:
RE Topcor lenses has an aperture communication lever and aperture closedown lever that standard Exata doesn't have, and earlier Auto Topcors with the shutter button arm have it on the opposite side from Exakta lenses.
As to #2, that's a fairly accurate assumption. There are some lenses identical to UV Topcor that are labeled "HI Topcor" with no aperture ring. The very last Topcor cameras (RM300), however, switched over to a Pentax K mount. The K mount lenses were made by a different manufacturer, CIMKO.
| connloyalist escribió: |
Can someone help me with two questions with respect to Topcon lenses?
1) I seem to remember reading somewhere that Topcon's lenses longer than some focal length don't have a standard exakta mount but a variation. Could someone please fill me in on the details? Which Topcon lenses will work on a standard exakta mount and which one will not?
2) My understanding is that Topcon's UV lenses have an entirely different, non-exakta, mount and also don't have an aperture ring. Does that mean that any Topcon lens that does have an aperture ring does have an exakta mount (with the provision of question 1)?
Regards, C. |
Editado por última vez por BrianSVP el Dom Mar 03, 2024 3:50 pm; editado 3 veces en total |
|
| Volver arriba |
|
 |
calvin83
 Registrado: 12 Abr 2009 Mensajes: 7740 Ubicación: Hong Kong
|
 Publicado: Dom Mar 03, 2024 3:45 pm Asunto: |
|
 Publicado: Dom Mar 03, 2024 3:45 pm Asunto: |
|
|
calvin83 wrote:
I think you need to specify which kind of topcon lens you are referring to using the info below:
http://www.ihagee.org/Nonihgcam/nonextopcon2.pdf _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Volver arriba |
|
 |
connloyalist
 Registrado: 22 Jul 2020 Mensajes: 381 Ubicación: the Netherlands
|
 Publicado: Dom Mar 03, 2024 5:39 pm Asunto: |
|
 Publicado: Dom Mar 03, 2024 5:39 pm Asunto: |
|
|
connloyalist wrote:
Thank you both.
That is a very interesting PDF, I hadn't seen that one before. By the looks of it, the only Topcon lenses that are going to work are those that don't have an aperture lever, since this lever doesn't look like it will work with my EXA adapter.
Regards, C. |
|
| Volver arriba |
|
 |
BrianSVP
 Registrado: 09 Jun 2023 Mensajes: 664 Ubicación: Philadelphia
|
 Publicado: Dom Mar 03, 2024 5:45 pm Asunto: |
|
 Publicado: Dom Mar 03, 2024 5:45 pm Asunto: |
|
|
BrianSVP wrote:
Which one is it? A lot of Exakta adapters are designed with slots or an inset lip on the adapter to accommodate the levers.
| connloyalist escribió: |
Thank you both.
That is a very interesting PDF, I hadn't seen that one before. By the looks of it, the only Topcon lenses that are going to work are those that don't have an aperture lever, since this lever doesn't look like it will work with my EXA adapter.
Regards, C. |
|
|
| Volver arriba |
|
 |
connloyalist
 Registrado: 22 Jul 2020 Mensajes: 381 Ubicación: the Netherlands
|
 Publicado: Dom Mar 03, 2024 5:59 pm Asunto: |
|
 Publicado: Dom Mar 03, 2024 5:59 pm Asunto: |
|
|
connloyalist wrote:
| BrianSVP escribió: |
Which one is it? A lot of Exakta adapters are designed with slots or an inset lip on the adapter to accommodate the levers.
|
Actually, I have gone through a few adapters but mostly been unsatisfied with them being somewhat too short leaving the lenses at infinity well before the indication on the lens. However, I was able to find an original Canon exakta to FD adapter. So I purchased a second M43 to FD adapter (Novoflex) and married the FD to EXA adapter to that. Perfect fit, giving me an exakta adapter I am very satisfied with. I can provide pictures if you are curious. I will have to check the other adapters to see if they have the slot you mention.
Regards, Christine |
|
| Volver arriba |
|
 |
SimonOL
Registrado: 28 Ago 2023 Mensajes: 25
|
 Publicado: Dom Mar 03, 2024 10:30 pm Asunto: |
|
 Publicado: Dom Mar 03, 2024 10:30 pm Asunto: |
|
|
SimonOL wrote:
| connloyalist escribió: |
| BrianSVP escribió: |
Which one is it? A lot of Exakta adapters are designed with slots or an inset lip on the adapter to accommodate the levers.
|
Actually, I have gone through a few adapters but mostly been unsatisfied with them being somewhat too short leaving the lenses at infinity well before the indication on the lens. However, I was able to find an original Canon exakta to FD adapter. So I purchased a second M43 to FD adapter (Novoflex) and married the FD to EXA adapter to that. Perfect fit, giving me an exakta adapter I am very satisfied with. I can provide pictures if you are curious. I will have to check the other adapters to see if they have the slot you mention.
Regards, Christine |
The Canon FD > Exakta mount converter doesn't work with RE Auto Topcor lenses. I have a similar setup for Exakta lenses and was disappointed when the Topcors didn't fit.
Most of the cheap Exakta adapters are OK to mount the Topcor lenses. I use one of the cheap 'zebra' style ones you can buy on ebay. You'd need to shim the adapter to get accurate infinity focus. |
|
| Volver arriba |
|
 |
BrianSVP
 Registrado: 09 Jun 2023 Mensajes: 664 Ubicación: Philadelphia
|
 Publicado: Dom Mar 03, 2024 10:34 pm Asunto: |
|
 Publicado: Dom Mar 03, 2024 10:34 pm Asunto: |
|
|
BrianSVP wrote:
If it's the one pictured in the link, the lip on it might actually be high enough to accommodate the levers.
https://www.dpreview.com/forums/thread/4215731 |
|
| Volver arriba |
|
 |
BrianSVP
 Registrado: 09 Jun 2023 Mensajes: 664 Ubicación: Philadelphia
|
 Publicado: Lun Mar 04, 2024 2:29 am Asunto: |
|
 Publicado: Lun Mar 04, 2024 2:29 am Asunto: |
|
|
BrianSVP wrote:
Good info.
| SimonOL escribió: |
| connloyalist escribió: |
| BrianSVP escribió: |
Which one is it? A lot of Exakta adapters are designed with slots or an inset lip on the adapter to accommodate the levers.
|
Actually, I have gone through a few adapters but mostly been unsatisfied with them being somewhat too short leaving the lenses at infinity well before the indication on the lens. However, I was able to find an original Canon exakta to FD adapter. So I purchased a second M43 to FD adapter (Novoflex) and married the FD to EXA adapter to that. Perfect fit, giving me an exakta adapter I am very satisfied with. I can provide pictures if you are curious. I will have to check the other adapters to see if they have the slot you mention.
Regards, Christine |
The Canon FD > Exakta mount converter doesn't work with RE Auto Topcor lenses. I have a similar setup for Exakta lenses and was disappointed when the Topcors didn't fit.
Most of the cheap Exakta adapters are OK to mount the Topcor lenses. I use one of the cheap 'zebra' style ones you can buy on ebay. You'd need to shim the adapter to get accurate infinity focus. |
|
|
| Volver arriba |
|
 |
connloyalist
 Registrado: 22 Jul 2020 Mensajes: 381 Ubicación: the Netherlands
|
 Publicado: Lun Mar 04, 2024 7:17 am Asunto: |
|
 Publicado: Lun Mar 04, 2024 7:17 am Asunto: |
|
|
connloyalist wrote:
Yes, that is it exactly.
Regards, C. |
|
| Volver arriba |
|
 |
connloyalist
 Registrado: 22 Jul 2020 Mensajes: 381 Ubicación: the Netherlands
|
 Publicado: Lun Mar 04, 2024 7:21 am Asunto: |
|
 Publicado: Lun Mar 04, 2024 7:21 am Asunto: |
|
|
connloyalist wrote:
| SimonOL escribió: |
The Canon FD > Exakta mount converter doesn't work with RE Auto Topcor lenses. I have a similar setup for Exakta lenses and was disappointed when the Topcors didn't fit.
Most of the cheap Exakta adapters are OK to mount the Topcor lenses. I use one of the cheap 'zebra' style ones you can buy on ebay. You'd need to shim the adapter to get accurate infinity focus. |
Good to know that my suspicion about Topcor lenses not working is correct. When I was using one of the cheap zebra style adapters I was indeed shimming the adapter to get it closer. I found that the cardboard of a serial box is 0.5mm thick (in Europe at least) and a ring of that worked quite decently. I am not sure about compressability of that cardboard over the long haul causing it to go out or angled or something like that.
Last night I looked around for my old adapter I had done like this but couldn't find it. It's around somewhere. Hey, don't tell me none of you have stuff lying around you forgot about or don't remember what exactly it is.
Regards, C. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|