MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Sears TLS Batteries
Ver tema anterior :: Ver tema siguiente  


Reply

Does anyone know if the Sears/Ricoh TLS camera has voltage regulation circuitry so it can take the modern 1.5v batteries, as opposed to the original 1.35v battery, without change in the light-meter readout?

~Marc


Reply

I don't know about ricoh. I know that spotmatic had it.

Rino.


Reply

estudleon escribió:
I don't know about ricoh. I know that spotmatic had it.

Rino.

Sorry, I need to correct you there slightly Rino. Jes and I have tested this out very thoroughly. The later Spotmatic SPF and ESII models have a balanced meter circuit design and show correct exposure when there is no current flow, so they can indeed cope with a fluctuating voltage. However, the meters in the earlier SP models and SPII are designed to show correct exposure when a tiny current is flowing thorough the meter, which requires a constant 1.35 volts from the battery.

Marc, if you can dig up a diagram or any other manufacturer's info on the meter circuit in the TLS maybe Jes and I can help. I found this page, it doesn't mention the meter circuit but maybe the author can help.
http://www.kyphoto.com/classics/ricoh401.html


Reply

Your probably aware of this site: http://www.butkus.org/chinon/batt-adapt-us.pdf
Certainly the most comprehensive article I've seen on the matter.

It offers a great many options/solutions for different batteries. It actually has a list that says that the Ricoh Singlex, which should follow the same basic design of the TLS, can take the 1.5v. Thanks

~Marc