| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Lun Sep 30, 2013 10:34 am Asunto: Nex-3 Auto ISO difficulty |
|
 Publicado: Lun Sep 30, 2013 10:34 am Asunto: Nex-3 Auto ISO difficulty |
|
|
Orio wrote:
hi guys,
is your Nex-3 camera handling Auto ISO well, or poorly?
In my camera, it seems to not work as it should. If I shoot in Time priority, and stop down the lens,
the photos get darker, while the Auto ISO does not apply the needed compensation.
I'd like to know your experiences with that. Am I doing anything wrongly? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
miran
 Registrado: 01 Ago 2012 Mensajes: 1364 Ubicación: Slovenia
|
 Publicado: Lun Sep 30, 2013 10:44 am Asunto: |
|
 Publicado: Lun Sep 30, 2013 10:44 am Asunto: |
|
|
miran wrote:
I think it's supposed to go up to 1600, then if it's too dark, photos will be dark. You're in time priority so you set the time and I assume you're using a manual lens with manual aperture, so the only parameter left to the camera is ISO. And it will very quickly run out of options, minimum is 200, maximum is 1600, that's a span of only 3 stops.
Personally I almost always use A mode and manual ISO. _________________ my flickr stream |
|
| Volver arriba |
|
 |
LucisPictor
 Registrado: 26 Feb 2007 Mensajes: 17633 Ubicación: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Publicado: Lun Sep 30, 2013 12:57 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 12:57 pm Asunto: |
|
|
LucisPictor wrote:
With a manual lens the NEX-3 does not know the focal length and cannot control the aperture.
Thus auto ISO does not make much sense. The cam goes down to 1/30s before adjusting ISO settings.
I have never used auto ISO with a manual lens because of that. _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Volver arriba |
|
 |
Rick1779
 Registrado: 17 Mayo 2013 Mensajes: 1207 Ubicación: Italy
Expire: 2014-06-06
|
 Publicado: Lun Sep 30, 2013 1:10 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 1:10 pm Asunto: |
|
|
Rick1779 wrote:
Auto ISO is handled not so good in nex system since you cannot choose the range of ISO, with mf I use the auto setting only in some cases, otherwise I pick the ISO and I shot in Time priority |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Lun Sep 30, 2013 1:10 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 1:10 pm Asunto: |
|
|
Orio wrote:
OK, thanks guys, Carsten explained me the situation. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Lun Sep 30, 2013 1:31 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 1:31 pm Asunto: |
|
|
iangreenhalgh1 wrote:
I've never used it. I have found that I never need to use higher than 200 because I use a tripod a lot. I hate noise so I find only 200 and 400 to be usable, 800 only at a pinch.
I'm interested to know how you're using yours, I'm always looking to pick up tips.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Lun Sep 30, 2013 2:07 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 2:07 pm Asunto: |
|
|
Orio wrote:
Normally with my Canon when I take pictures around (i.e. when I am not making an accurate photo job) I set the camera
to Auto ISO with the limiter on 1600 and the shooting mode to Time Priority in order to be sure to take photos that are not shaken.
Then I adjust the aperture at will/need, relying on AutoISO for compensation.
This workflow is not possible with Nex-3 and manual lenses apparently. Not a big deal, but it would have been nice to have. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Lun Sep 30, 2013 2:34 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 2:34 pm Asunto: |
|
|
philslizzy wrote:
I've had the same problem and found that its only any good with the kit lens. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Lun Sep 30, 2013 3:05 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 3:05 pm Asunto: |
|
|
cooltouch wrote:
You guys are lucky in that you can even use Auto ISO. Ian has an old Canon like me, and I can tell by his response that he's run into the same issues I have. With my XS/1000D, ISO 200 is acceptable, but anything above that is too noisy for me. There is considerable detail loss at ISO 400. ISO 800 is good only for emergencies. And ISO 1600, which is as high as my XS gets, is, well it's there, and that's about all I can say about it. I have mine permanently set to ISO 100. And, like Ian, I use a tripod or monopod a lot, but even then, not as much as I should.
Actually, I don't trust Auto ISO, to be completely honest. When I bought my XS, the default ISO setting was Auto, so the first few times I used the camera, this was what the ISO was set to. And I noticed when reviewing the photos how some of them were very noisy and others weren't. It was then that I noticed the ISO setting. Recently I bought a P&S Nikon digital -- a model LC28, which features a whopping 20 megapixels in a camera that costs new about 100 bucks (US). But it's a beginner's camera with Auto ISO only, and I have found that it takes great pictures only in bright sun conditions, where its Auto function is allowing ISO 100. Otherwise the LC28's images range from "just OK" to "awful." If somebody is buying one of these Nikon LC28s as an upgrade to their phone's camera, then buying it makes sense. But just barely.
You know, even if I owned a camera that handled higher ISO numbers with very little detectable noise, honestly I still don't know if I would trust it to give me what I want if it controls ISO and I don't. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
LucisPictor
 Registrado: 26 Feb 2007 Mensajes: 17633 Ubicación: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Publicado: Lun Sep 30, 2013 6:00 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 6:00 pm Asunto: |
|
|
LucisPictor wrote:
I have never ever used auto ISO.
Until I got my Fuji X-E1, that is. So, until last week.
Seriously, since you do not see any noise in the images of the X-E1 at ISO1600 at all, you can easily use auto ISO.
And still, I normally don't.  _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Lun Sep 30, 2013 10:59 pm Asunto: |
|
 Publicado: Lun Sep 30, 2013 10:59 pm Asunto: |
|
|
Lloydy wrote:
I never use Auto ISO on my NEX5, I like to keep the ISO as low as I can, so I set the ISO as low as I think I can get away with either hand held or usually on the tripod, set the camera on Shutter Priority, set the aperture on the lens, and then judge the exposure in live view. If it's hand held I flick though ap's and speeds first, then ISO's, until I think I can hold it steady. If it's on the tripod then ISO is as low as I can go and the aperture is the important setting, the speed is largely unimportant. I don't even know if Auto ISO works with this kind of workflow? _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
ManualFocus-G
 Registrado: 29 Dic 2008 Mensajes: 6675 Ubicación: United Kingdom
Expire: 2014-11-24
|
 Publicado: Dom Oct 13, 2013 8:59 am Asunto: |
|
 Publicado: Dom Oct 13, 2013 8:59 am Asunto: |
|
|
ManualFocus-G wrote:
I'm surprised at the comments about the 1000D's noise to be honest. It should be clean to iso 800...are you shooting in jpg? I only ever used the raw output when I had one.
My Canon 6D has a nice auto iso implementation. I shoot in av mode and specify the minimum acceptable shutter speed. I also have an Olympus pen e-pm1 which uses the lens focal length x multiplier to work out the minimum shutter speed before bumping up the iso (which is annoying as the stabilisation is superb).
I always manually specified the iso with my nex as far as I can remember. _________________ Graham
Shooter of choice: Nikon Z6
Lenses:
Vivitar presets
Soligor autos
Pentacon presets
Prakticar PBs
Some other weird stuff!
|
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Dom Oct 13, 2013 9:29 am Asunto: |
|
 Publicado: Dom Oct 13, 2013 9:29 am Asunto: |
|
|
kuuan wrote:
Right, in A mode it goes to 1/30th before upping the ISO and certainly it would be better if one could choose the shortest shutter speed before it starts upping the ISO ( or tell the camera the focal lengths used and it would choose min. shutter speed accordingly )
The shortest shutter speed before the camera ups the ISO being 'fixed' I find 1/30th sec. ideal, it is the shortest I can handhold with most lenses I use and wouldn't want it to be different. Or in other words certainly I find Auto ISO very useful also as it is and I am surprised that most of you don't.
I pretty much always use Auto ISO on my NEX5N, mostly in A mode. If I use a long lens or for other reasons need a faster shutter speed I change to S mode, again with auto ISO ( all that with manual lenses setting aperture on the lens. )
anyway Orio's camera also should up the ISO in S mode and why it doesn't do it has not been clarified. _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections
Editado por última vez por kuuan el Dom Oct 13, 2013 10:30 am; editado 1 vez en total |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Dom Oct 13, 2013 10:28 am Asunto: |
|
 Publicado: Dom Oct 13, 2013 10:28 am Asunto: |
|
|
Orio wrote:
| kuuan escribió: |
anyway, why Orio's camera would not up the ISO in S mode has not been explained, I only can think of his camera being faulty. |
They say Auto ISO works only when the camera recognizes a lens via the electronic contacts. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Dom Oct 13, 2013 10:40 am Asunto: |
|
 Publicado: Dom Oct 13, 2013 10:40 am Asunto: |
|
|
kuuan wrote:
| Orio escribió: |
| kuuan escribió: |
anyway, why Orio's camera would not up the ISO in S mode has not been explained, I only can think of his camera being faulty. |
They say Auto ISO works only when the camera recognizes a lens via the electronic contacts. |
hm..who says so? Auto ISO definitely works very well at least on my NEX5N, and as I understand also Carstens says it works, just he doesn't deem it to be useful because in A mode it goes down to 1/30 sec. before it starts upping the ISO which he must find to be too short.
btw. S mode with Auto ISO with a lens without electrical contacts, at least on my NEX and I am pretty sure that this is true for any NEX , works like what Pentax and now also Ricoh GR calls TAv mode, that is M mode + auto ISO + exposure compensation: aperture is chosen on lens, shutter speed on camera, Auto ISO will change ISO to expose correctly and that incl. exposure compensation ( if + exp. comp. ISO goes up, - exp. comp. ISO goes down ) _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Dom Oct 13, 2013 11:12 am Asunto: |
|
 Publicado: Dom Oct 13, 2013 11:12 am Asunto: |
|
|
kuuan wrote:
auto ISO in S mode certainly should work, also on NEX3:
http://www.dpreview.com/forums/thread/3096512#forum-post-39834955
http://www.dpreview.com/forums/thread/3108510 _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections
Editado por última vez por kuuan el Dom Oct 13, 2013 4:31 pm; editado 1 vez en total |
|
| Volver arriba |
|
 |
fermy
 Registrado: 17 Feb 2012 Mensajes: 1974
|
 Publicado: Dom Oct 13, 2013 1:41 pm Asunto: |
|
 Publicado: Dom Oct 13, 2013 1:41 pm Asunto: |
|
|
fermy wrote:
Here's the deal with Auto ISO on NEX-3 and 5. It does not work in M-mode, but it does work in S mode. Auto ISO is limited to ISO 1600 and changing that limit is not possible. So the workflow that Orio wants is possible in S mode. In fact, that's exactly the workflow that I use with manual lenses when it gets darker. It's not the best implementation of Auto ISO, but it's usable. _________________ Many lenses and some film bodies for sale here: http://forum.mflenses.com/canon-fd-minolta-md-c-mounts-m42-pentax-and-more-t50465.html
Flickr http://www.flickr.com/photos/96060788@N06/ |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Mar Oct 15, 2013 5:51 am Asunto: |
|
 Publicado: Mar Oct 15, 2013 5:51 am Asunto: |
|
|
kuuan wrote:
| fermy escribió: |
| Here's the deal with Auto ISO on NEX-3 and 5. It does not work in M-mode, but it does work in S mode. Auto ISO is limited to ISO 1600 and changing that limit is not possible. So the workflow that Orio wants is possible in S mode. In fact, that's exactly the workflow that I use with manual lenses when it gets darker. It's not the best implementation of Auto ISO, but it's usable. |
right
kind of irritating that the OP either denies or ignores our efforts to help him _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Volver arriba |
|
 |
calvin83
 Registrado: 12 Abr 2009 Mensajes: 7740 Ubicación: Hong Kong
|
 Publicado: Mar Oct 15, 2013 6:28 am Asunto: |
|
 Publicado: Mar Oct 15, 2013 6:28 am Asunto: |
|
|
calvin83 wrote:
Thanks fermy and kuuan! The auto ISO is very useful in light changing situation. I should have learn how to use the Auto ISO earlier right after I bought my 5N.  _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Mar Oct 15, 2013 6:46 am Asunto: |
|
 Publicado: Mar Oct 15, 2013 6:46 am Asunto: |
|
|
kuuan wrote:
| calvin83 escribió: |
Thanks fermy and kuuan! The auto ISO is very useful in light changing situation. I should have learn how to use the Auto ISO earlier right after I bought my 5N.  |
most welcome calvin
as pointed out S mode + auto ISO with a lens with aperture ring equals Pentax's TAv mode which imo is something any modern 'serious' camera should offer.
however I prefer A mode with much sunlight and A mode + auto ISO at low light in case I don't need faster shutter than 1/30th. S mode with plenty light with ISO already at it's lowest may lead to overexposure in case one forgets to manually shorten shutter speed according to aperture chosen ( resp. to higher ISO than necessary if shutter chosen is too short ). Of course one will notice overexposure in EVF or LCD in time to correct, but 'in the field' I usually prefer being able to fully rely on auto exposure instead of the delay of having to adjust manually
btw. Ricoh GXR M with adapted lenses works the same _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Volver arriba |
|
 |
calvin83
 Registrado: 12 Abr 2009 Mensajes: 7740 Ubicación: Hong Kong
|
 Publicado: Mar Oct 15, 2013 10:58 am Asunto: |
|
 Publicado: Mar Oct 15, 2013 10:58 am Asunto: |
|
|
calvin83 wrote:
| kuuan escribió: |
| calvin83 escribió: |
Thanks fermy and kuuan! The auto ISO is very useful in light changing situation. I should have learn how to use the Auto ISO earlier right after I bought my 5N.  |
most welcome calvin
as pointed out S mode + auto ISO with a lens with aperture ring equals Pentax's TAv mode which imo is something any modern 'serious' camera should offer.
however I prefer A mode with much sunlight and A mode + auto ISO at low light in case I don't need faster shutter than 1/30th. S mode + auto ISO with plenty light, if ISO already is at it's lowest ( and commonly if one chooses a fast aperture ), will lead to overexposure in case one forgets to manually shorten shutter speed accordingly. ( of course one will notice in EVF or LCD in time, but 'in the field' I prefer being able to fully rely on auto exposure instead of the delay of having to adjust manually ) |
These tips will be helpful for those who use manual lens on their NEX.
I tried the auto ISO today in S mode. It is useful for maintaining safe shutter speed. A mode still is my first choice but I do have more combo to use. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Mar Oct 15, 2013 11:07 am Asunto: |
|
 Publicado: Mar Oct 15, 2013 11:07 am Asunto: |
|
|
kuuan wrote:
right!
A mode + auto ISO is most useful for most situations!
S mode + auto ISO only is indicated, of course, if one wants a certain shutter speed ( and you want the camera to automatically expose correctly, choosing the needed ISO according to the aperture set on the lens ) and if one 'needs' a faster shutter speed ( or try for a shorter, to 'save' ISO, if you can handhold it ) than the 1/30th sec. A mode + auto ISO chooses for any ISO higher than base ISO _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections
Editado por última vez por kuuan el Mar Oct 15, 2013 11:35 am; editado 1 vez en total |
|
| Volver arriba |
|
 |
ForenSeil
 Registrado: 15 Abr 2011 Mensajes: 2731 Ubicación: Kappeln, Schleswig-Holstein, Germany.
|
 Publicado: Mar Oct 15, 2013 11:33 am Asunto: |
|
 Publicado: Mar Oct 15, 2013 11:33 am Asunto: |
|
|
ForenSeil wrote:
I never had problem with NEX-3, NEX-C3 and NEX-5N in time priority mode
But ultra fast shutter speeds (~1/2000s and more) did produce underexposure problems at least with my NEX-5N and manual wide angles and lenses with short flange back, no matter if ISO was set manually or auto. That does only occur with manual lenses for some reason, not with dedicated E-Mount lenses. It caused uneven- and underexposure. I had never testet that with NEX-3 and C3 but maybe it has something to do with your problem? That has something to do with the distance between shutter and sensor and their synchronisation and is not a unique-to-NEX problem - other cameras have the same little issue.
Sample
NEX-3 and NEX-5 are fully usable to ISO1600
and NEX-5N, C3 and later are fully usable up to 3200 imho
Sample: NEX-C3, speed priority mode, ISO1250 (auto), 1/2000s - works very well imho and noise does not offend me
Crop:
Crop:
How offending noise is highly depends on your monitor in my experience. If you print them even in A3 or A2 size noise is much harder to find than on my Samsung 24" monitor. On my 24" Benq I had befor noise looked much worse. _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Dom Oct 20, 2013 10:44 pm Asunto: |
|
 Publicado: Dom Oct 20, 2013 10:44 pm Asunto: |
|
|
kuuan wrote:
| ForenSeil escribió: |
I never had problem with NEX-3, NEX-C3 and NEX-5N in time priority mode
[b]But ultra fast shutter speeds (~1/2000s and more) did produce underexposure problems at least with my NEX-5N and manual wide angles and lenses with short flange back, no matter if ISO was set manually or auto. .......... |
I believe your findings though I had not noticed myself. I believe it because I had noticed that, when using non native lenses, at very bright sun my Pentax dSLR often underexposed, and the Ricoh GXR M though less does it too. To me it seems that the NEX does the best job of the 3, but nevertheless it may underexpose whenever there is very strong sunlight.
| ForenSeil escribió: |
and NEX-5N, C3 and later are fully usable up to 3200 imho
|
fully agree
earlier in this thread I had made a mistake, please note:
in A mode with auto ISO the camera usually will go as slow as 1/60th sec. of shutter speed before it starts upping the ISO from base ISO
NOT to 1/30sec. as I had written earlier! _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Volver arriba |
|
 |
|
|