MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Measuring shutter speeds
Ver tema anterior :: Ver tema siguiente  


Reply

Hi Colleagues,

After my recent RF fever, I've been getting a few cameras coming from eBay, from unknown owners. Some film failures because sealing and speed variations, have driven me to test the cameras before using them, so I can save in film...

One the measurements that may decide me to go/no go for shooting a roll, is the shutter speed. After some google researching I found several simple solutions that may be handy for some of you.

The cheapest solution is to build a simple light detector based on a phototransistor or photodiode, like these ones:


http://mraggett.members.beeb.net/shuttertester/shuttertester.htm
http://www.davidrichert.com/sound_card_shutter_tester.htm

and use the Audacity program as indicated in the article.

It happens to happen that I own a simple storage oscilloscope (a cheap one built by a company called PO.LABS) and I use it instead. The results are quite promising, I've checked the Canonet being out of speed for more than the 50%, so it has stopped me from using it.

Best regards,
Jes.


Reply

Jesito escribió:

The cheapest solution is to build a simple light detector based on a phototransistor or photodiode, like these ones:

http://mraggett.members.beeb.net/shuttertester/shuttertester.htm
http://www.davidrichert.com/sound_card_shutter_tester.htm

and use the Audacity program as indicated in the article.


An even simpler solution, although not quite as accurate, is to use a microphone attached to the camera. It will also give an estimate of the vibrations caused by the shutter and/or mirror - the 1/250 s or 1/300 s of some Compur shutters gives quite an unbelievable jolt (those Compurs have an extra, very strong spring for the shortest exposure time, which must be selected before cocking the shutter, and it takes some real effort to turn the exposure time dial to the highest position.)

Veijo


Reply

Very nice ideas. Thanks for sharing!