MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Developing film in coffee
Ver tema anterior :: Ver tema siguiente  


Reply

I thought "caffenol" development was just a party-trick way of getting something crummy out of kitchen chemicals. Now I've tried it I'm really very excited by it. The results I've got are better than I got from Fomadon-P, which is one of the few chemicals I'm able to get sent here.

You can see the results and the method I used here:

http://fotoblogzone.com/2012/01/17/discovering-caffenol/

as well as scans of the whole 6x6 frame at small print size and a section of it at a huge size, equivalent to a one metre (3ft) by one metre print (though I would expect a real print to be better than the scan).

The cost of using caffenol-C as a one-shot developer is about double the cost of using a commercial chemical for home developing, though somebody says you can use the same developer for three or more films as long as you use it on the day you make it.

Looking around the net, though, I see that the formulation I tried uses a lot more coffee than many others, some of them would be the same price as commercial one-shot development. I haven't tried them (yet) so I can't say if they work as well as the one I stumbled on. The price doesn't really matter, it's still half the High-Street rate and a fifth or less of what a professional lab would charge.

The advantages of this for me are:
1) No difficulty in securiing developer - it'a all in the supermarket.
2) I can make whatever quantity I want to use that day so there are no developer bottles lying around going stale.
3) One-shot developing gives maximum control, I've been reusing commercial developer rather than using the one-shot method but after the first film I don't really know how strong/oxydised it is and extending development to compensate reduces the amount of contrast.
4) No concerns about toxicity. I know the sodium carbonate (washing soda) is alkaline but it's not dangerous as long as you wash it off and don't splash it in your eyes or drink it. I don't know anything about the toxicity or otherwise of Fomadon or other commercial offerings.

Anyway, if anyone has been looking for an alternative to commercial developer, this is it - and it isn't just a joke, it really works. Unfortunately, you still need fixer.


Reply

You missed the downside: You'll be lucky to got a full set of tones that a better quality developer will yield. I don't remember the exact figures, but I seem to recall when we had a play with it 30 years ago that we were only achieving dynamic range of the order 2.5. That's a pretty flat neg.

However, for specific effects it's ok.


Reply

The densities I got seem to be pretty much the same as I get from processing in conventional developer and, indeed, in what I got back from Peak Imaging (though they are maybe a bit stronger). I don't know how to determine the true dynamic range.

Have you looked at the shot on my blog? Does it seem to be lacking in tonal range?


Reply

Yes, the image does look good. I may have another play with caffenol in the summer and see what it can do with some 'difficult' negs with vast tonal ranges. It'll be interesting to assess the negs with the densitometer and refresh my memory with a more scientific approach. That said, art doesn't necessarily need science. As you have observed, the relative 'eco friendliness' is quite attractive too Cool


Reply

I wish I understood what I was doing. Developing has always been very much a "follow the recipe" technique for me. I did delve into Ansel Adams's "The Negative" but had considerable difficulty understanding anything (thankfully, I've since read that I'm not alone in this and he has a talent for making even the simple look complex).

It is quite possible that the scanner "improves" the negs, because I can set the limits for black and white and it adjusts the rest accordingly. I would like a bit more contrast but that generally seems to be lacking from all my films and I had suspected that the makers have reduced the amount of silver since I was using film in the 70s, making them thinner.

Stronger solution, shorter development should increase the contrast, shouldn't it? But which ingredients should I increase and how much should I cut the developing time by?

I think I will shoot a selection of classic cameras and develop it this way as a project for Fine Art America. Maybe someone will give me some money for them Smile


Reply

You're right about the silver. A decade or so ago everyone reduced it. Plus-X went from my favourite film to just "it's ok", ditto Tri-X.

You might like Foma. Traditional, old-fashioned thick emulsion. Gives beautiful images in the right soup.


Reply

Yes, I like Fomapan. In fact, I was so impressed with the results from my Leica that I've now got 25 rolls of the stuff in ISO 100 and 200 sitting in the fridge. I'm not so happy with the contrast on 4x5 film sheets, though.

It's a shame if they spoiled the films by cutting the silver. I saw a chemical engineer discussing in a forum the amount of silver in film and it is ridiculously low. One gram per square meter I think he said. That is less than US10c per film. I doubt if anybody would have quibbled about paying 10c or 15c more per roll.


Reply

PaulC escribió:
Yes, I like Fomapan. In fact, I was so impressed with the results from my Leica that I've now got 25 rolls of the stuff in ISO 100 and 200 sitting in the fridge. I'm not so happy with the contrast on 4x5 film sheets, though.
Have you tried any of the two-bath soups for sheet films? I'd love to get back into big stuff again. Maybe next year...

PaulC escribió:
It's a shame if they spoiled the films by cutting the silver. I saw a chemical engineer discussing in a forum the amount of silver in film and it is ridiculously low. One gram per square meter I think he said. That is less than US10c per film. I doubt if anybody would have quibbled about paying 10c or 15c more per roll.
Exactly. It's not like they weren't passing the cost on. Maybe they wanted to keep the price static, but make the extra few cents per roll. Either way, we lost out Sad


Reply

GrahamNR17 escribió:
Have you tried any of the two-bath soups for sheet films? I'd love to get back into big stuff again. Maybe next year...


I've only used the Foma developers so far. I'm just feeling my way in large format. It's made a lot more difficult by doing everything in a changing bag and a Patterson tank. It is very difficult to avoid scratching the film, I think it would be much easier if I could load/unload it in an open space.

I'll have to look into two-bath development to see what the advantages are... can it even be done in a single tank?


Reply

PaulC escribió:
I'll have to look into two-bath development to see what the advantages are... can it even be done in a single tank?
Yep, tank is fine for two-bath. Many two-baths are fairly panthermic, so temperature variation within certain limits is acceptable.

For scenes with a wide tonal range, such is interiors with windows, bright sunny days with deep shadows etc, give Stoeckler a try, or Barry Thornton's variant. It's beautiful stuff in those situations. And shelf life of the two baths is in months/years. Foma loves the stuff.


Reply

I had intended trying out the coffee method, but after reading this, I'll stick with Rodinal; now there's a good developer IMO.


Reply

martinsmith99 escribió:
I had intended trying out the coffee method, but after reading this, I'll stick with Rodinal; now there's a good developer IMO.
It's ok for large format, and to a certain extend medium format, but not sure I'd use it on small film. The grain is just downright intrusive Confused


Reply

How about to sending to you any kind of developer by a member ? If I can help I can buy here what would like to have and send it to you.


Reply

...just been trawling your Shutterstock stuff, Paul. You've some really cracking stuff in there Cool


Reply

Actually with the lower ph versions of caffenol the grain is less intrusive than rodinal but the tones fall differently at the same exposures. I don't mind the tabular grained emulsions in coffee but I prefer my adox/efke in rodinal or better still some good old Beutler A+B.


Reply

OK, thanks. I just looked it up and I think I can order those chemicals online (though the customs people go a bit funny when white powders arrive).