MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

C/Y adapters, important difference
Ver tema anterior :: Ver tema siguiente  


Reply

Not only there are some adapters that allow lenses like Planar 1.4/50 to stop down while other adapters don't;

Now I have also found, that there are some Contax lenses - and I can give two examples: the Mutar I teleconverter and the S-Planar 60mm f/2.8 - that don't lock at all on the newer type of adapter, rotating freely, while they do lock well on older adapters.

I'd like to know if any of you has had the same issue with any Contax or Yashica lens.


Reply

please post pics of your adapters.


Reply

ok, I will


Reply

Orio escribió:
Now I have also found, that there are some Contax lenses - and I can give two examples: the Mutar I teleconverter and the S-Planar 60mm f/2.8 - that don't lock at all on the newer type of adapter, rotating freely, while they do lock well on older adapters.


I had a similar issue with one of the adapters. The problem was solved by loosening the two screws that hold the lock spring on the adapter, and moving the spring itself a bit lower. It's really easier to do than to explain; the problem was that the spring that's supposed to lock the lens was positioned slightly too high due to bad assembly tolerances, so it just went above the flanges of the lens.