MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Bronica ETRC
Ver tema anterior :: Ver tema siguiente  


Reply

A couple of questions about a Bronica ETRC.

Will the film insert from an ETRS back fit inside the ETRC?

Why won't the trigger on the speed grip E always fire? Can it be adjusted?


Reply

camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


Reply

Doc Sharptail escribió:
camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


Thank you for that. I think I solved the trigger problem