| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
dls182
Registrado: 29 Jul 2008 Mensajes: 4
|
 Publicado: Mar Jul 29, 2008 6:08 am Asunto: Sticky Mirror on a Praktica Nova... |
|
 Publicado: Mar Jul 29, 2008 6:08 am Asunto: Sticky Mirror on a Praktica Nova... |
|
|
dls182 wrote:
I just acquired a Praktica Nova and I'm having a lot of trouble with the mirror. A lot of the time when I cock the camera, the mirror does not go down, leaving me with a view of my own eye through the view finder...
However, on some shots, it will function correctly! It's making me go crazy!
Any help would be greatly appreciated |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mar Jul 29, 2008 11:16 am Asunto: |
|
 Publicado: Mar Jul 29, 2008 11:16 am Asunto: |
|
|
Attila wrote:
Nice to see you here ! I hope somebody able to answer to your problem soon. |
|
| Volver arriba |
|
 |
peterqd
 Registrado: 28 Feb 2007 Mensajes: 7449 Ubicación: near High Wycombe, UK
Expire: 2014-01-04
|
 Publicado: Mar Jul 29, 2008 2:26 pm Asunto: |
|
 Publicado: Mar Jul 29, 2008 2:26 pm Asunto: |
|
|
peterqd wrote:
The mirror is held down by a spring. The shutter release mechanism lifts it against the spring pressure before opening the shutter and then holds it while the shutter is open. When the shutter closes the mirror is released and the spring pulls it down again. When you lift the mirror up with your finger can you feel the spring pressure?
I've never dismantled mine so I can't help a lot, but if you can't feel the spring then it obviously means a complicated job. The camera isn't really worth the cost of a professional repairer. _________________ Peter - Moderator |
|
| Volver arriba |
|
 |
themoleman342
 Registrado: 21 Oct 2007 Mensajes: 2190 Ubicación: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Publicado: Mar Jul 29, 2008 3:40 pm Asunto: |
|
 Publicado: Mar Jul 29, 2008 3:40 pm Asunto: |
|
|
themoleman342 wrote:
In a lot of cases a mirror problem can be worked out by simply exercising the camera at every speed about a thousand times. These cameras tend to sit in someones closet for 15 years and never have their mechanisms worked so they become sticky. I had an older spotmatic that had the same issue and by just sitting in front of a movie or the television and just winding + firing at various speeds it seems to work out the problem. Like Peter said it's just not valuable enough to have it professionally repaired. But I would try doing this before attempting a dismantle session. A camera is worth nothing if you can't trust it to work the way it should.
~Marc |
|
| Volver arriba |
|
 |
bob955i
 Registrado: 15 Abr 2007 Mensajes: 2495
|
 Publicado: Mar Jul 29, 2008 8:14 pm Asunto: |
|
 Publicado: Mar Jul 29, 2008 8:14 pm Asunto: |
|
|
bob955i wrote:
In addition to the above, take the lens off and have a look at the mirror cushion foam as it might have gone sticky thus causing the mirror itself to stick. |
|
| Volver arriba |
|
 |
dls182
Registrado: 29 Jul 2008 Mensajes: 4
|
 Publicado: Jue Jul 31, 2008 6:18 am Asunto: |
|
 Publicado: Jue Jul 31, 2008 6:18 am Asunto: |
|
|
dls182 wrote:
Thanks for all the advice so far.
It doesn't seem to be the spring, as there is pressure when the mirror is down, however the mirror only comes down after you cock the camera, not as soon as the shutter closes...
It doesn't seem to be the cushion foam either...
And to be honest, I don't understand how the shutter speed control on the nova works...
As you may be able to tell, I'm new to the world of older cameras...  |
|
| Volver arriba |
|
 |
dls182
Registrado: 29 Jul 2008 Mensajes: 4
|
 Publicado: Jue Jul 31, 2008 6:38 am Asunto: |
|
 Publicado: Jue Jul 31, 2008 6:38 am Asunto: |
|
|
dls182 wrote:
Never mind about the shutter speed controls, I just figured them out
The mirror problem appears to be because of the little clip inside the camera that holds it in place. It appears to move slightly when the camera is cocked, but it doesn't always release the mirror. A slight flick seems to let it go, I just have to be careful that i don't stick a great big fingerprint on the mirror...
Thanks again for all the suggestions, I wouldn't have figured it out otherwise! |
|
| Volver arriba |
|
 |
peterqd
 Registrado: 28 Feb 2007 Mensajes: 7449 Ubicación: near High Wycombe, UK
Expire: 2014-01-04
|
 Publicado: Jue Jul 31, 2008 12:47 pm Asunto: |
|
 Publicado: Jue Jul 31, 2008 12:47 pm Asunto: |
|
|
peterqd wrote:
| dls182 escribió: |
Thanks for all the advice so far.
It doesn't seem to be the spring, as there is pressure when the mirror is down, however the mirror only comes down after you cock the camera, not as soon as the shutter closes...
It doesn't seem to be the cushion foam either...
And to be honest, I don't understand how the shutter speed control on the nova works...
As you may be able to tell, I'm new to the world of older cameras...  |
My apologies, I've just realised you have the original Nova and I was describing the mirror on the later model, Nova 1.
The Nova 1 had a number of design modifications. On your model, you're right, the mirror remains up until the shutter is cocked and you also have the lift-up shutter speed dial. I'm glad you figured it out in spite of my mistake! _________________ Peter - Moderator |
|
| Volver arriba |
|
 |
Farside
 Registrado: 01 Sep 2007 Mensajes: 6579 Ubicación: Ireland
Expire: 2013-12-27
|
 Publicado: Jue Jul 31, 2008 6:07 pm Asunto: |
|
 Publicado: Jue Jul 31, 2008 6:07 pm Asunto: |
|
|
Farside wrote:
| themoleman342 escribió: |
| In a lot of cases a mirror problem can be worked out by simply exercising the camera at every speed about a thousand times. These cameras tend to sit in someones closet for 15 years and never have their mechanisms worked so they become sticky. I had an older spotmatic that had the same issue and by just sitting in front of a movie or the television and just winding + firing at various speeds it seems to work out the problem. |
Same here - that Paxette I bought stuck its shutter again, but it turns out it's just sticky through disuse - there's nothing broken on it, even though they are a bit known for broken shutters. I got it working again by use of the palm hammer and jolted the self-timer into action. Once that freed up the mech it was easy enough to keep it working and firing. I'd hazard a guess this one probably lay unused for a couple of decades. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Volver arriba |
|
 |
dls182
Registrado: 29 Jul 2008 Mensajes: 4
|
 Publicado: Sáb Ago 02, 2008 6:47 am Asunto: |
|
 Publicado: Sáb Ago 02, 2008 6:47 am Asunto: |
|
|
dls182 wrote:
I think the camera must have been laying around for a while - it was a bit dusty...
It came with a lense which, from the info in these forums, seems to a good one. Its a Carl Zeiss Jena DDR. I'm still learning my way around it, but I think I'm getting my head around it
I've found that if I jiggle the lever thingy pefore cocking it completely, the mirror comes down a bit, then when I cock it completely, it comes all the way down. I'm a little worried that the film is progressing a little further than it should though, so I'm not getting as many shots or something...
I guess I'll find out when I get it developed  _________________ I use a Praktica Nova 1st mod with a Carl Zeiss Jena DDR lense...
And yes, I'm a newbie................................ |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|