| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
miki11
Registrado: 19 Dic 2025 Mensajes: 4
|
 Publicado: Vie Dic 19, 2025 10:14 pm Asunto: Problem with unscrewing the lens ring on the Canon FD 35-70 |
|
 Publicado: Vie Dic 19, 2025 10:14 pm Asunto: Problem with unscrewing the lens ring on the Canon FD 35-70 |
|
|
miki11 wrote:
I have a Canon FD 35-70 SSC lens on my table. The problem is that the zoom mechanism rollers are damaged and one lens is dirty. Specifically, it is the last lens of the front optical block. There is fogging inside, and I cannot unscrew the rear ring (applying a minimal amount of acetone to the thread does not help). The manufacturer probably used some kind of “glue” to prevent spontaneous unscrewing. After many years, this agent has glued hard the thread, which makes it difficult to unscrew. At least that's what I suspect.
Can you suggest an effective way to unscrew this ring? I don't want to ruin this fine lens. For now, I consider heating it in the oven to be a last resort.
I am attaching photos of the entire group (without the front lens, which is removed separately, first).
https://www.photrio.com/forum/attachments/dscf6684-jpg.413976/
https://www.photrio.com/forum/attachments/dscf6694-jpg.413977/ |
|
| Volver arriba |
|
 |
visualopsins
 Registrado: 05 Mar 2009 Mensajes: 11698 Ubicación: California
Expire: 2027-07-11
|
 Publicado: Vie Dic 19, 2025 10:44 pm Asunto: |
|
 Publicado: Vie Dic 19, 2025 10:44 pm Asunto: |
|
|
visualopsins wrote:
Welcome miki11
Other folks will be along shortly with real answers; probably using a drop or two of some sort of solvent on the ring, being especially careful to avoid getting any on the edges of cemented lens elements. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Volver arriba |
|
 |
stevemark
 Registrado: 29 Abr 2011 Mensajes: 5509 Ubicación: Switzerland
|
 Publicado: Vie Dic 19, 2025 11:22 pm Asunto: |
|
 Publicado: Vie Dic 19, 2025 11:22 pm Asunto: |
|
|
stevemark wrote:
| visualopsins escribió: |
Welcome miki11
Other folks will be along shortly with real answers; probably using a drop or two of some sort of solvent on the ring, being especially careful to avoid getting any on the edges of cemented lens elements. |
There are no cemented lenses in the entire FD 2.8-3.5/35-70mm SSC; therefore I would try to immerse the block for some time in a solvent like acetone. Sometimes it takes a few minutes (or even half an hour) to loosen the elements. I'm pretty sute that this should work - unless the element was factory sealed with an epoxy resin: That would require careful heating indeed.
S _________________ www.artaphot.ch |
|
| Volver arriba |
|
 |
miki11
Registrado: 19 Dic 2025 Mensajes: 4
|
 Publicado: Sáb Dic 20, 2025 12:43 pm Asunto: |
|
 Publicado: Sáb Dic 20, 2025 12:43 pm Asunto: |
|
|
miki11 wrote:
| stevemark escribió: |
| visualopsins escribió: |
Welcome miki11
Other folks will be along shortly with real answers; probably using a drop or two of some sort of solvent on the ring, being especially careful to avoid getting any on the edges of cemented lens elements. |
There are no cemented lenses in the entire FD 2.8-3.5/35-70mm SSC; therefore I would try to immerse the block for some time in a solvent like acetone. Sometimes it takes a few minutes (or even half an hour) to loosen the elements. I'm pretty sute that this should work - unless the element was factory sealed with an epoxy resin: That would require careful heating indeed.
S |
Yes, this zoom lens has 10 lenses in 10 groups. The front block contains 5 separate lenses, and the one that is dirty is the fifth one (counting from the front).
After two days of gently soaking the thread with acetone, I finally managed to unscrew the ring last night. I tried to clean it (with hydrogen peroxide, IPA - 99% isopropyl alcohol, Zeiss optics cleaner), but unfortunately I couldn't remove the artifact. I immersed the entire element in IPA for 10 hours, but that didn't help either. Here is the result after today's inspection.
https://www.photrio.com/forum/attachments/dscf6695-jpg.414018/
What agent can help me remove this “haze” without risking damage to the coatings? |
|
| Volver arriba |
|
 |
stevemark
 Registrado: 29 Abr 2011 Mensajes: 5509 Ubicación: Switzerland
|
 Publicado: Lun Jun 08, 2026 6:41 pm Asunto: |
|
 Publicado: Lun Jun 08, 2026 6:41 pm Asunto: |
|
|
stevemark wrote:
| miki11 escribió: |
After two days of gently soaking the thread with acetone, I finally managed to unscrew the ring last night. I tried to clean it (with hydrogen peroxide, IPA - 99% isopropyl alcohol, Zeiss optics cleaner), but unfortunately I couldn't remove the artifact. I immersed the entire element in IPA for 10 hours, but that didn't help either. Here is the result after today's inspection.
https://www.photrio.com/forum/attachments/dscf6695-jpg.414018/
What agent can help me remove this “haze” without risking damage to the coatings? |
I have encountered this kind of damage on two lenses - on the front lenses of a Mamiya Sekor C 4/210mm and the front lenses of a Pettri 4/200mm. I suspect the surface is etched by some aggessive chemicals either from the lens barrel or from the surroundings. Probably the only way to improve the situation would be re-polishing the lens surface (e. g. with cerium oxide powder).
S _________________ www.artaphot.ch |
|
| Volver arriba |
|
 |
visualopsins
 Registrado: 05 Mar 2009 Mensajes: 11698 Ubicación: California
Expire: 2027-07-11
|
 Publicado: Lun Jun 08, 2026 8:25 pm Asunto: |
|
 Publicado: Lun Jun 08, 2026 8:25 pm Asunto: |
|
|
visualopsins wrote:
Try pure soap and water. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Volver arriba |
|
 |
stevemark
 Registrado: 29 Abr 2011 Mensajes: 5509 Ubicación: Switzerland
|
 Publicado: Mar Jun 09, 2026 4:01 pm Asunto: |
|
 Publicado: Mar Jun 09, 2026 4:01 pm Asunto: |
|
|
stevemark wrote:
| visualopsins escribió: |
| Try pure soap and water. |
Polishing - or just washing?
I case of the two lenses I mentioned above (Mamiya Sekor C 4/210 and Petri 4/200) the lens surfaces clearly are damaged; simply washing didn't result in any improvement.
Many years ago Zeiss Oberkochen seems to have promoted using cigarette ash for polishing:
https://richardhaw.com/2020/12/13/repair-polishing-glass-part-1/
Not sure whether that's a urban legend, though ...
I haven't tried, but since I have some smoker friends I should aks them for some ash ...
S _________________ www.artaphot.ch |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|