| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
55
 Registrado: 13 Mayo 2013 Mensajes: 773 Ubicación: U.S.
Expire: 2026-07-24
|
 Publicado: Vie Ago 15, 2025 9:35 am Asunto: Mount Identification Request |
|
 Publicado: Vie Ago 15, 2025 9:35 am Asunto: Mount Identification Request |
|
|
55 wrote:
After checking lens mount identification pages on the internet, I still can't figure this one out. Can anyone here tell me which mount this is?
(Edit: replaced first photo)
#1
#2
#3

Editado por última vez por 55 el Dom Ago 17, 2025 11:27 am; editado 1 vez en total |
|
| Volver arriba |
|
 |
casualcollector
 Registrado: 01 Ago 2008 Mensajes: 754 Ubicación: Spaced out on Florida's Space Coast
|
 Publicado: Vie Ago 15, 2025 10:03 am Asunto: |
|
 Publicado: Vie Ago 15, 2025 10:03 am Asunto: |
|
|
casualcollector wrote:
Petri breech lock. _________________ In Search Of "R" Serial Soligors
Found: 135/2.8 #R407660, 200/4 #R405526, 300/5.5 #R411127 |
|
| Volver arriba |
|
 |
55
 Registrado: 13 Mayo 2013 Mensajes: 773 Ubicación: U.S.
Expire: 2026-07-24
|
 Publicado: Vie Ago 15, 2025 3:11 pm Asunto: |
|
 Publicado: Vie Ago 15, 2025 3:11 pm Asunto: |
|
|
55 wrote:
| casualcollector escribió: |
| Petri breech lock. |
Thanks for the quick reply. My first thought was "Of course, I should've known it was Petri!". Perhaps the non-auto mount had confused me? But then I double checked and it seems this Sonnagar's mount is different from Petri.
It's a little narrower than the mount on Petri branded lenses I have. It wobbles and won't lock when I try to attach it to my Petri FT SLR or Petri to Sony E adapter.
Here's the Sonnagar compared to an actual Petri lens:
#1

Editado por última vez por 55 el Dom Ago 17, 2025 1:19 pm; editado 1 vez en total |
|
| Volver arriba |
|
 |
D1N0
 Registrado: 07 Ago 2012 Mensajes: 2726
|
 Publicado: Vie Ago 15, 2025 7:48 pm Asunto: |
|
 Publicado: Vie Ago 15, 2025 7:48 pm Asunto: |
|
|
D1N0 wrote:
Whatever mount it is, it is probably attached to a t2-mount. _________________ pentaxian |
|
| Volver arriba |
|
 |
BrianSVP
 Registrado: 09 Jun 2023 Mensajes: 664 Ubicación: Philadelphia
|
 Publicado: Sáb Ago 16, 2025 2:04 am Asunto: |
|
 Publicado: Sáb Ago 16, 2025 2:04 am Asunto: |
|
|
BrianSVP wrote:
The bare brass sections suggest the mount's been modified/remachined. Perhaps a not completely successful attempt to convert a different mount for use on a Petri body? |
|
| Volver arriba |
|
 |
Alun Thomas
 Registrado: 20 Ago 2018 Mensajes: 801 Ubicación: New Zealand
|
 Publicado: Sáb Ago 16, 2025 6:00 am Asunto: |
|
 Publicado: Sáb Ago 16, 2025 6:00 am Asunto: |
|
|
Alun Thomas wrote:
That lens is generally only available in Exakta or M42, I often search for Sonnagar just to see what's out there. I did one time buy a copy with Minolta SR mount, but it was clearly an adaptation, the entire mount was quite roughly fashioned from brass. This lens is fairly early, possibly Komura manufactured just going from the 'S' prefix. I wondered if it maybe Praktina mount, which is similar but it doesn't appear to be. |
|
| Volver arriba |
|
 |
Alun Thomas
 Registrado: 20 Ago 2018 Mensajes: 801 Ubicación: New Zealand
|
 Publicado: Dom Ago 17, 2025 6:37 am Asunto: |
|
 Publicado: Dom Ago 17, 2025 6:37 am Asunto: |
|
|
Alun Thomas wrote:
| benadamx escribió: |
| Alun Thomas escribió: |
(Sellers Pic)
One of the more attractively styled early Japanese SLR lenses, a Juplen 135/2.8 for M42, this can also be found as a Sonnagar brand lens. The serial number has an 'S' prefix, which I strongly suspect points to Komura as the manufacturer. Most copies of this lens I have seen are still in excellent condition. |
I have the sonnagar version, in what sure looks to be petri bayonet mount but doesn't quite fit up to a petri body (but does fit my 3D-printed petri adapter) |
Someone else has found a similar lens in the past also. |
|
| Volver arriba |
|
 |
55
 Registrado: 13 Mayo 2013 Mensajes: 773 Ubicación: U.S.
Expire: 2026-07-24
|
 Publicado: Dom Ago 17, 2025 3:11 pm Asunto: |
|
 Publicado: Dom Ago 17, 2025 3:11 pm Asunto: |
|
|
55 wrote:
This lens is full of surprises.
| D1N0 escribió: |
| Whatever mount it is, it is probably attached to a t2-mount. |
It didn't occur to me it might be a T mount. It turns out it's not threaded on as T would be, but is held in place by three small screws.
| BrianSVP escribió: |
| The bare brass sections suggest the mount's been modified/remachined. Perhaps a not completely successful attempt to convert a different mount for use on a Petri body? |
Yes, I wondered about the brass. I don't remember seeing a mount like that among my other lenses.
| Alun Thomas escribió: |
| That lens is generally only available in Exakta or M42, I often search for Sonnagar just to see what's out there. I did one time buy a copy with Minolta SR mount, but it was clearly an adaptation, the entire mount was quite roughly fashioned from brass. This lens is fairly early, possibly Komura manufactured just going from the 'S' prefix. I wondered if it maybe Praktina mount, which is similar but it doesn't appear to be. |
Indeed, I have another Sonnagar copy of this lens in M42 mount. I wondered about Praktina mount, but I also thought it didn't quite match from images I found online. And, if I've measured correctly, my lens mount diameter is 49mm (see my first post). According to a reference site, Praktina mount diameter is 46mm:
https://www.graphics.cornell.edu/~westin/misc/mounts-by-register.html
The focus ring on this 135 doesn't reach the infinity mark. More than that, it seems to have been reassembled incorrectly because it's much shorter than my M42 copy.
#1
Using the mount from the M42 copy, I mounted the (shorter) lens on a Sony A7ii. As expected, it focuses far beyond infinity.
And the shorter 135's mount is lower profile than the M42.
#2
The brass mount's opening seems surprisingly small (28mm) to me for a 135mm f2.8 lens. I wondered if it was intended for a smaller than 35mm film format? Using a Canon EF to Sony E adapter, I held the 135 up against my Sony A7ii and didn't see any obvious mechanical vignetting with the black baffle in place. And I later found that the baffle unscrews.
#3
#4
 |
|
| Volver arriba |
|
 |
piokang
Registrado: 28 Ago 2025 Mensajes: 1 Ubicación: https://geometrygame.org/
|
 Publicado: Jue Ago 28, 2025 3:56 am Asunto: |
|
 Publicado: Jue Ago 28, 2025 3:56 am Asunto: |
|
|
piokang wrote:
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash |
|
| Volver arriba |
|
 |
DConvert
 Registrado: 12 Jun 2010 Mensajes: 984 Ubicación: Essex UK
|
 Publicado: Jue Ago 28, 2025 11:44 am Asunto: |
|
 Publicado: Jue Ago 28, 2025 11:44 am Asunto: |
|
|
DConvert wrote:
| piokang escribió: |
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash |
M42 is hardly 'less common' it's possible the most common mount in my hoard!
It's also very easy to confirm, with just a ruler/measure & a male thread item of 1mm or 0.75mm pitch all other threaded possibilities can be ruled out. even without these the only common mount that can't be ruled out with a quick glance is T2 (m42x0.75). There are threads like M44 which I probably would misidentify at a glance but they are much more unusual. |
|
| Volver arriba |
|
 |
BrianSVP
 Registrado: 09 Jun 2023 Mensajes: 664 Ubicación: Philadelphia
|
 Publicado: Jue Ago 28, 2025 1:59 pm Asunto: |
|
 Publicado: Jue Ago 28, 2025 1:59 pm Asunto: |
|
|
BrianSVP wrote:
For that matter, Exakta is very common and pretty easy to identify as well. The obvious tipoffs are the narrow throat size and the placement of the stop screw. Variants like the Topcor version have their own tipoffs as well.
Praktina is really the only of the mentioned systems that's uncommon/not immediately obvious.
| DConvert escribió: |
| piokang escribió: |
Identifying a lens mount can be tricky, especially with older, less common systems like Praktina, Exakta, or M42. Knowing details like the serial number prefixes helps trace the maker—in this case, possibly Komura.
Geometry Dash |
M42 is hardly 'less common' it's possible the most common mount in my hoard!
It's also very easy to confirm, with just a ruler/measure & a male thread item of 1mm or 0.75mm pitch all other threaded possibilities can be ruled out. even without these the only common mount that can't be ruled out with a quick glance is T2 (m42x0.75). There are threads like M44 which I probably would misidentify at a glance but they are much more unusual. |
|
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|