| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Mié Ene 21, 2015 4:31 pm Asunto: Yet again..adapting Altix lenses |
|
 Publicado: Mié Ene 21, 2015 4:31 pm Asunto: Yet again..adapting Altix lenses |
|
|
philslizzy wrote:
In the previous posts my photos have disappeared. I've been asked to explain again how to do it. Here is my way and I mention a second way.
I want to adapt my Altix lenses to M42, so I can use them on my Pentax, Canons, Minoltas and mirrorless. The FFD of Altix is almost identical to M42 making this an easy adapt and infinity focus can be achieved.
Parts needed: 1x M42 adapter of your choice. I am using a PK adapter here.
Tools: A round sided file, marker pen (sharpie)
Time: 5 minutes.
Method: Mark the top of the adaptor, then line up your Altix lens against the adaptor.
Mark where the bayonets lie against the M42 thread.
Gently file the screw thread down where the marks are. Dont file all the way through the thread. try the lens for fit.
I don't want to mod my lenses permanently, If I did, I'd glue the adaptor on. Or I'd file down the bayonet lugs a little so they'd push into an M42 thread - thats the alternative version.
The lens shown is narrow barrelled so I usually put some blu-tak inside to seal any light leaks and to hold the lens on. A permanent solution would be to run epoxy glue round the tiny gap (on the inside) and paint it black.
adaptor filed down You can see where I marked the adaptor.
Lens tried for fit.
On my Pentax.
 _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
mo
 Registrado: 27 Ago 2009 Mensajes: 8979 Ubicación: Australia
Expire: 2016-07-30
|
 Publicado: Jue Ene 22, 2015 4:32 am Asunto: |
|
 Publicado: Jue Ene 22, 2015 4:32 am Asunto: |
|
|
mo wrote:
Thank you Phil,I have just noticed these Altix lenses...probably a bad thing now you have shown this solution for Pentax  _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Jue Ene 22, 2015 7:27 pm Asunto: |
|
 Publicado: Jue Ene 22, 2015 7:27 pm Asunto: |
|
|
philslizzy wrote:
I have a Tessar on one of my others, its a good performer. Much different than the one supplied with prakticas. I'm finding the longer lenses hard to get. I'd love a small set of Altix lenses. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
mo
 Registrado: 27 Ago 2009 Mensajes: 8979 Ubicación: Australia
Expire: 2016-07-30
|
 Publicado: Jue Ene 22, 2015 11:42 pm Asunto: |
|
 Publicado: Jue Ene 22, 2015 11:42 pm Asunto: |
|
|
mo wrote:
Keep looking and you will get them eventually,such is LBA.  _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Vie Ene 23, 2015 2:39 am Asunto: |
|
 Publicado: Vie Ene 23, 2015 2:39 am Asunto: |
|
|
Attila wrote:
Thank you!! |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Vie Ene 23, 2015 10:36 pm Asunto: |
|
 Publicado: Vie Ene 23, 2015 10:36 pm Asunto: |
|
|
philslizzy wrote:
My pleasure Attila. You can modify any M42 thread like this, and if the filing is done cleanly the original mount can still be used for its original purpose. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
uddhava
 Registrado: 22 Ago 2012 Mensajes: 3079 Ubicación: Hungary
Expire: 2021-06-21
|
 Publicado: Sáb Ene 24, 2015 2:20 am Asunto: |
|
 Publicado: Sáb Ene 24, 2015 2:20 am Asunto: |
|
|
uddhava wrote:
Thanks for sharing this, it's possible I might buy an Altix mount lens one day, as they are pretty common and
inexpensive. |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Sáb Ene 24, 2015 11:31 pm Asunto: |
|
 Publicado: Sáb Ene 24, 2015 11:31 pm Asunto: |
|
|
philslizzy wrote:
And bodies are abundant too, and even cheaper!
I have a broken body and I've taken the mount from it and I'm looking at how to make a proper adapter. Although it wont be any good on a DSLR because of the thickness so mirrorless it would have to be.
Hmm, I could attach an M42 mount directly on the back and use my helical. No harm to camera no harm to lens.
I'll show my efforts... _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Sáb Ene 24, 2015 11:31 pm Asunto: |
|
 Publicado: Sáb Ene 24, 2015 11:31 pm Asunto: |
|
|
philslizzy wrote:
And bodies are abundant too, and even cheaper!
I have a broken body and I've taken the mount from it and I'm looking at how to make a proper adapter. Although it wont be any good on a DSLR because of the thickness so mirrorless it would have to be.
Hmm, I could attach an M42 mount directly on the back and use my helical. No harm to camera no harm to lens.
I'll show my efforts... _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
edri
 Registrado: 26 Oct 2014 Mensajes: 317 Ubicación: walking in the air
|
 Publicado: Mié Ene 28, 2015 10:41 am Asunto: |
|
 Publicado: Mié Ene 28, 2015 10:41 am Asunto: |
|
|
edri wrote:
Clever Altix-Pentax adaptation.
However the Altix flange distance is 3mm smaller than Pentax K flange distance. Do keeps it still the focus to infinity? |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Mié Ene 28, 2015 1:08 pm Asunto: |
|
 Publicado: Mié Ene 28, 2015 1:08 pm Asunto: |
|
|
philslizzy wrote:
Its not smaller. Thats only what the FFD lists say - it is almost exactly the same.
_________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
edri
 Registrado: 26 Oct 2014 Mensajes: 317 Ubicación: walking in the air
|
 Publicado: Mié Ene 28, 2015 2:32 pm Asunto: |
|
 Publicado: Mié Ene 28, 2015 2:32 pm Asunto: |
|
|
edri wrote:
Thanks for the reply. Now because of you it starts to rise LBA of Altix lenses
Telefogar, telefogar, telefogar ... it still whispers a voice  |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Jue Ene 29, 2015 12:33 am Asunto: |
|
 Publicado: Jue Ene 29, 2015 12:33 am Asunto: |
|
|
philslizzy wrote:
| edri escribió: |
Thanks for the reply. Now because of you it starts to rise LBA of Altix lenses
Telefogar, telefogar, telefogar ... it still whispers a voice  |
...and for me too. I've not seen one at a price I want to pay! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
uddhava
 Registrado: 22 Ago 2012 Mensajes: 3079 Ubicación: Hungary
Expire: 2021-06-21
|
 Publicado: Jue Ene 29, 2015 2:20 am Asunto: |
|
 Publicado: Jue Ene 29, 2015 2:20 am Asunto: |
|
|
uddhava wrote:
| philslizzy escribió: |
| edri escribió: |
Thanks for the reply. Now because of you it starts to rise LBA of Altix lenses
Telefogar, telefogar, telefogar ... it still whispers a voice  |
...and for me too. I've not seen one at a price I want to pay! |
+1, but I continue to hope. |
|
| Volver arriba |
|
 |
pavko
 Registrado: 31 Ene 2011 Mensajes: 216 Ubicación: PL
|
 Publicado: Jue Ene 29, 2015 3:15 pm Asunto: |
|
 Publicado: Jue Ene 29, 2015 3:15 pm Asunto: |
|
|
pavko wrote:
| philslizzy escribió: |
Its not smaller. Thats only what the FFD lists say - it is almost exactly the same.
|
It is (42.5). But it is on bayonet lugs which you are pushing deep into your mount. That's way you are going a little past infinity. |
|
| Volver arriba |
|
 |
Marek
 Registrado: 13 Abr 2014 Mensajes: 903 Ubicación: In the heart of Europe
|
 Publicado: Jue Ene 29, 2015 3:29 pm Asunto: |
|
 Publicado: Jue Ene 29, 2015 3:29 pm Asunto: |
|
|
Marek wrote:
Very well. Bookmarked  _________________ Angry young man !
Flickr | Juzaphoto | Ebay sales
marekfiser [at] gmail [dot] com |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Vie Ene 30, 2015 12:21 am Asunto: |
|
 Publicado: Vie Ene 30, 2015 12:21 am Asunto: |
|
|
philslizzy wrote:
| pavko escribió: |
| philslizzy escribió: |
Its not smaller. Thats only what the FFD lists say - it is almost exactly the same.
|
It is (42.5). But it is on bayonet lugs which you are pushing deep into your mount. That's way you are going a little past infinity. |
It goes past infinity by such a small amount as to be negligible. You can scale focus and still get sharp images. Of course you could make a paper shim to make it up. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
pavko
 Registrado: 31 Ene 2011 Mensajes: 216 Ubicación: PL
|
 Publicado: Vie Ene 30, 2015 11:29 am Asunto: |
|
 Publicado: Vie Ene 30, 2015 11:29 am Asunto: |
|
|
pavko wrote:
Then it is nice coincidence. On the other hand I'm really happy that I've bought Primagon & Telefogar in Altix mount for next to nothing before you've developed and published this ingenious method. Prices have skyrocketed already. |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Vie Ene 30, 2015 7:08 pm Asunto: |
|
 Publicado: Vie Ene 30, 2015 7:08 pm Asunto: |
|
|
philslizzy wrote:
| pavko escribió: |
| Then it is nice coincidence. On the other hand I'm really happy that I've bought Primagon & Telefogar in Altix mount for next to nothing before you've developed and published this ingenious method. Prices have skyrocketed already. |
there has been plenty posts about adapting before this, but a lot of images have gone.
Prices are already high. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
Norzillian
Registrado: 14 Feb 2015 Mensajes: 3 Ubicación: Norway
|
 Publicado: Sáb Feb 14, 2015 1:41 pm Asunto: |
|
 Publicado: Sáb Feb 14, 2015 1:41 pm Asunto: |
|
|
Norzillian wrote:
Sorry im a bit late to this thread (and new on this forum, Hi everybody ), but i was just wondering how the lens is actually attached to the adapter? Do you spin the lens so that the tabs on the mount go into the threads of the adapter? |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Sáb Feb 14, 2015 2:48 pm Asunto: |
|
 Publicado: Sáb Feb 14, 2015 2:48 pm Asunto: |
|
|
philslizzy wrote:
| Norzillian escribió: |
Sorry im a bit late to this thread (and new on this forum, Hi everybody ), but i was just wondering how the lens is actually attached to the adapter? Do you spin the lens so that the tabs on the mount go into the threads of the adapter? |
First, welcome to the forum.
That could be done if you used a small hand drill. I may try that myself. Good idea. I normally just use hot glue on the back to hold the lens in. It does the job perfectly well, and pulls off if you need to. This is why I use a K adapter. I use the lenses on my NEX or Pentax, so its all I need.
Permanent glue is an option, so is grinding off the bayonet flanges and pushing them through a M39-M42 adapter and gluing that on. There is plenty of room - you may need to remove the 'pin'. I've not tried that as I don't have a spare lens. I'd rather keep mine original so I can use them on the camera.
I am a bit unhappy about making a permanent mod to any lens unless it can be reversed, or I use it regularly. I have dozens of lenses including about 6 or 7 that I've permanently modified. And after the initial 'shoot' I've never used the since.
Edit: I may add that the lenses I've adapted are from non working rangefinder cameras. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
Norzillian
Registrado: 14 Feb 2015 Mensajes: 3 Ubicación: Norway
|
 Publicado: Lun Feb 16, 2015 11:02 am Asunto: |
|
 Publicado: Lun Feb 16, 2015 11:02 am Asunto: |
|
|
Norzillian wrote:
Thanks for the welcome.
Oh i see. That's super smart to just use hot glue, and then i imagine one could just tape it with black tape if there's any light leaking.
Thanks for your answer. |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Lun Feb 16, 2015 8:55 pm Asunto: |
|
 Publicado: Lun Feb 16, 2015 8:55 pm Asunto: |
|
|
philslizzy wrote:
| Norzillian escribió: |
Thanks for the welcome.
Oh i see. That's super smart to just use hot glue, and then i imagine one could just tape it with black tape if there's any light leaking.
Thanks for your answer. |
I get no light leaks but I use black coloured hot glue. Yes you can get it in lots of colours. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
eugeniuz2005
Registrado: 22 Sep 2025 Mensajes: 1
|
 Publicado: Lun Sep 22, 2025 6:49 am Asunto: |
|
 Publicado: Lun Sep 22, 2025 6:49 am Asunto: |
|
|
eugeniuz2005 wrote:
No photos anymore.
The text is clear but the pictures will make it 100% understandable.
If possible, Please! |
|
| Volver arriba |
|
 |
visualopsins
 Registrado: 05 Mar 2009 Mensajes: 11698 Ubicación: California
Expire: 2027-07-11
|
 Publicado: Lun Sep 22, 2025 9:26 am Asunto: |
|
 Publicado: Lun Sep 22, 2025 9:26 am Asunto: |
|
|
visualopsins wrote:
Welcome eugeniuz2005 _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Volver arriba |
|
 |
|
|