MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Repair
Ver tema anterior :: Ver tema siguiente  


Reply



Hello, this is my first post.
I would like to restore this Tessar gutta percia, but I don't know how to remove the rear part of the lens, as the protruding lever prevents it from rotating. Is it perhaps interlocking ?. Thanks for any advice on how to proceed
Caesar


Reply



Reply

three flat screws on the back of the lens - remove those and the back cover lifts off.


Reply

Lloydy escribió:
three flat screws on the back of the lens - remove those and the back cover lifts off.

This version doesn't have screws on the back.



Reply

All of my smaller CZJ lenses have 3 screws on the back....... Question

Maybe the rear cover is tightly clipped, pushed on ? or you have to take it apart from the front ?


Reply

This is the problem with starting two identical threads! -- replies get missed...

from the other identical original post: http://forum.mflenses.com/repair-t82027.html

hasan escribió:
https://www.youtube.com/watch?v=xnt4MIvqguk
Look at 1:30; Did you already try to set the aperture to 22, and unscrew the rear ring while pushing & holding that lever...?


Reply

Thanks so much for the quick reply.
I will see the video I will try to follow the instructions.
Caesar