MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

WTB slip-on lens cap for Konica 57mm f1.2
Ver tema anterior :: Ver tema siguiente  


Reply

The subject tells it: This cap should be a metal slip-on cap with the ID of 65mm, to fit filter thread diameter of 62mm. Now, If I'm incorrect on that, let me know. 62mm pinch-on Konica caps are out there, but apparently the metal jobbie is a genuine unicorn. Please let me know if you have one, or know where I might find one.


Reply

ektar escribió:
The subject tells it: This cap should be a metal slip-on cap with the ID of 65mm, to fit filter thread diameter of 62mm. Now, If I'm incorrect on that, let me know. 62mm pinch-on Konica caps are out there, but apparently the metal jobbie is a genuine unicorn. Please let me know if you have one, or know where I might find one.


Don't have one at the moment, but I have had and sold these in the past (with the lens), so they are rarely out there. The pinch cap is definitely a lot more common.


Reply

The search continues; right now I have a period-correct slip on metal Vivitar cap that works, but oh the shame...