| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
DigiChromeEd
 Registrado: 29 Dic 2009 Mensajes: 3468 Ubicación: Northern Ireland
|
 Publicado: Sáb Abr 13, 2019 12:01 pm Asunto: Konica FT-1 motor shutter problem? |
|
 Publicado: Sáb Abr 13, 2019 12:01 pm Asunto: Konica FT-1 motor shutter problem? |
|
|
DigiChromeEd wrote:
I have a Konica FT-1 motor SLR which has developed a shutter problem. What is happening is this:-
When I release the shutter at any speed the shutter opens, the mirror lifts and the motor winds the film on to the next frame. In order for the shutter to close and the mirror to return I have to activate the shutter button five or six times which winds the film on each time.
I know the electronics in these cameras are unreliable but can anyone point me in the direction of what the fault may be?
The camera body itself is in mint condition and if possible would like to be able to continue using it with my collection of Hexanon lenses. _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| Volver arriba |
|
 |
kansalliskala
 Registrado: 19 Jul 2007 Mensajes: 5122 Ubicación: Southern Finland countryside
Expire: 2016-12-30
|
 Publicado: Dom Abr 14, 2019 7:43 am Asunto: |
|
 Publicado: Dom Abr 14, 2019 7:43 am Asunto: |
|
|
kansalliskala wrote:
Have you looked at the three flat cables that connect the electric boards under the top cover. They seem to be the most common cause of problems. Foam insulation that is under the flat metal connector turns into gel and cause unexplained behaviour.
https://www.flickr.com/photos/15235665@N04/sets/72157623203627474/ _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| Volver arriba |
|
 |
DigiChromeEd
 Registrado: 29 Dic 2009 Mensajes: 3468 Ubicación: Northern Ireland
|
 Publicado: Dom Abr 14, 2019 9:48 am Asunto: |
|
 Publicado: Dom Abr 14, 2019 9:48 am Asunto: |
|
|
DigiChromeEd wrote:
| kansalliskala escribió: |
Have you looked at the three flat cables that connect the electric boards under the top cover. They seem to be the most common cause of problems. Foam insulation that is under the flat metal connector turns into gel and cause unexplained behaviour.
https://www.flickr.com/photos/15235665@N04/sets/72157623203627474/ |
I haven't ventured inside the camera yet but I have seen the flickr page in your link recently. What should I use to replace the original foam insulation with? _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| Volver arriba |
|
 |
Gardener
 Registrado: 22 Sep 2013 Mensajes: 949 Ubicación: USA
|
 Publicado: Dom Abr 14, 2019 3:05 pm Asunto: |
|
 Publicado: Dom Abr 14, 2019 3:05 pm Asunto: |
|
|
Gardener wrote:
Things like that are usually an electrical failure, a short or a disconnect. Without a repair manual it might be very hard to find out what and where exactly. Even with it in hands it often times is not possible. |
|
| Volver arriba |
|
 |
DigiChromeEd
 Registrado: 29 Dic 2009 Mensajes: 3468 Ubicación: Northern Ireland
|
 Publicado: Mié Abr 24, 2019 1:47 pm Asunto: |
|
 Publicado: Mié Abr 24, 2019 1:47 pm Asunto: |
|
|
DigiChromeEd wrote:
| Gardener escribió: |
| Things like that are usually an electrical failure, a short or a disconnect. Without a repair manual it might be very hard to find out what and where exactly. Even with it in hands it often times is not possible. |
 _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| Volver arriba |
|
 |
kansalliskala
 Registrado: 19 Jul 2007 Mensajes: 5122 Ubicación: Southern Finland countryside
Expire: 2016-12-30
|
 Publicado: Jue Abr 25, 2019 6:50 am Asunto: |
|
 Publicado: Jue Abr 25, 2019 6:50 am Asunto: |
|
|
kansalliskala wrote:
| DigiChromeEd escribió: |
| kansalliskala escribió: |
Have you looked at the three flat cables that connect the electric boards under the top cover. They seem to be the most common cause of problems. Foam insulation that is under the flat metal connector turns into gel and cause unexplained behaviour.
https://www.flickr.com/photos/15235665@N04/sets/72157623203627474/ |
I haven't ventured inside the camera yet but I have seen the flickr page in your link recently. What should I use to replace the original foam insulation with? |
Did you try it? I used a vinyl floor rubber noise insulation canvas (? ). I have about 20 meter roll of it and needed only 1 cm x 2 cm piece. Any thin rubber should go I think.
edit: I found it, this exactly, very good material for almost everything
https://professionals.tarkett.com/en_EU/collection-C001442-acoustic-comfort-underlayer/tarkomfort-premium _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|