MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Meyer Primiplan 58/1.9: disassembly problem
Ver tema anterior :: Ver tema siguiente  


Reply

My old M42 pre-set Meyer Primoplan 58/1.9 can certainly do with a relube of the focussing drive mechanism, but I have some problems taking it apart. Here's how far I have managed.

1. Remove three screws from the back to take off the camera mount ring.

2. Remove the two black-finish screws that work as pins for the straight slots, for effecting rectilinear travel

3. Unscrew lens unit from focussing drive unit, and then...

... the lens unit rotates a few turns and then it cannot go any further to come out of the focussing drive unit. I cannot see anything obvious that stops it from doing so.

I would greatly appreciate any insight into this; thank you in advance.