MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Spotmatic ES mirror issue, Part 57
Ver tema anterior :: Ver tema siguiente  


Reply

Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Houseofgee escribió:
Hello all! I have a Spotmatic SE with the “stuck” mirror issue. I have read all of the previous threads on this topic and followed the excellent repair directions but I’m still having issues. Specifically, I have removed the bottom plate, carefully cleaned the cog, lever and assembly, and the camera now fires properly almost all of the time at higher speeds (500 and 1000). However, 1 out of every 20 or so times at higher speeds, the lever will not allow the pin to drop as it should, leaving the mirror stuck. This happens 2 out of 3 times at lower speeds. Any suggestions for what to try next? I have included a picture.

Thank you!



Reply

Thank you, Edgar. I’m not sure happened to the pic on my first post.


Reply

Houseofgee escribió:
Thank you, Edgar. I’m not sure happened to the pic on my first post.



You can't post images or links in your first post, an anti-spam measure. You'll be ok from now on.

Welcome to the forum by the way! Someone should be along who may be able to help.


Reply

Thanks!


Reply

Welcome Houseofgee

(No photos or links in first post is anti-spam protection)