| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Sáb Jun 14, 2008 12:39 pm Asunto: Dealing with noise with Epson 4490 |
|
 Publicado: Sáb Jun 14, 2008 12:39 pm Asunto: Dealing with noise with Epson 4490 |
|
|
Orio wrote:
I have made a test of scanning a slide with Epson 4490 using three methods.
1) Noise reducer in scanning interface
2) ICE + ninja in photoshop
3) normal + ninja in photoshop
here's my results:
Full image resized:
Noise reducer in scanning interface, at lowest setting:
ICE + ninja in photoshop (to try remove ICE artifacts):
normal scanning(no tricks) + ninja in photoshop:
For me, normal scanning + ninja is clear winner.
It leaves some noise (on purpose, I reduced effect amount) but it preserve some minimum sharpness)
Noise reduction in the scanning interface is too blurring even at the lowest setting.
ICE creates some ugly artifacts, which I tried to remove with ninja but without much result (you can still see them).
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Sáb Jun 14, 2008 12:46 pm Asunto: |
|
 Publicado: Sáb Jun 14, 2008 12:46 pm Asunto: |
|
|
Orio wrote:
Addition: I should perhaps try once more by using built-in scanner noise reducer, bu tthis time increasing the built-in sharpness also (I left it at minimum in the above test).
Perhaps lowest noise reducer + medium sharpness could work better. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
maddog10
 Registrado: 08 Abr 2008 Mensajes: 1072 Ubicación: Maryland, USA
Expire: 2015-02-12
|
 Publicado: Sáb Jun 14, 2008 12:48 pm Asunto: |
|
 Publicado: Sáb Jun 14, 2008 12:48 pm Asunto: |
|
|
maddog10 wrote:
I agree with you conclusions, based on the photos you have shown. _________________ Michael Hill |
|
| Volver arriba |
|
 |
lulalake
 Registrado: 22 Abr 2007 Mensajes: 1191 Ubicación: Near Austin Texas
Expire: 2011-11-18
|
 Publicado: Sáb Jun 14, 2008 2:58 pm Asunto: |
|
 Publicado: Sáb Jun 14, 2008 2:58 pm Asunto: |
|
|
lulalake wrote:
Orio, I mentioned this in another post but you may be having more film grain issues as opposed to scanner noise issues. My experience is that the best film to scan is the finest grain film available.
Jules |
|
| Volver arriba |
|
 |
Schnauzer
 Registrado: 09 Abr 2008 Mensajes: 2155 Ubicación: Maine, USA
Expire: 2012-03-08
|
 Publicado: Sáb Jun 14, 2008 4:08 pm Asunto: |
|
 Publicado: Sáb Jun 14, 2008 4:08 pm Asunto: |
|
|
Schnauzer wrote:
What do you reccomend for film for all around use Jules? _________________ Ron |
|
| Volver arriba |
|
 |
lulalake
 Registrado: 22 Abr 2007 Mensajes: 1191 Ubicación: Near Austin Texas
Expire: 2011-11-18
|
 Publicado: Sáb Jun 14, 2008 8:27 pm Asunto: |
|
 Publicado: Sáb Jun 14, 2008 8:27 pm Asunto: |
|
|
lulalake wrote:
| Schnauzer escribió: |
| What do you reccomend for film for all around use Jules? |
B&W, Ilford FP4+ (My favorite) or any fine grain film.
Color, most pro films, Portra, Astia, Velvia, Reala are all good fineer grain films. Expensive, but the best quality you can get. |
|
| Volver arriba |
|
 |
naplam
 Registrado: 22 Mar 2007 Mensajes: 480 Ubicación: Spain
Expire: 2013-11-30
|
 Publicado: Sáb Jun 14, 2008 10:15 pm Asunto: |
|
 Publicado: Sáb Jun 14, 2008 10:15 pm Asunto: |
|
|
naplam wrote:
Orio, maybe a test with a fine grain B/W film would be interesting in order to use it as the "base" situation and then trying with colour and more grainy films. |
|
| Volver arriba |
|
 |
Orio
Registrado: 24 Feb 2007 Mensajes: 29545 Ubicación: West Emilia
Expire: 2012-12-04
|
 Publicado: Sáb Jun 14, 2008 10:38 pm Asunto: |
|
 Publicado: Sáb Jun 14, 2008 10:38 pm Asunto: |
|
|
Orio wrote:
I had to use a 400 ISO in that situation because it was January mid afternoon and cloudy waether, so nearly zero ambient light available.
Of course using a velvia 50 will give better results (I already tried), but my goal here was exactly to find the most effective way to deal with grainy film.
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|