MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Help taking apart a Vivitar Macro Focusing Teleconverter
Ver tema anterior :: Ver tema siguiente  


Reply

Hello, I'm taking apart a Vivitar Macro Focusing TC for possible use as a focusing helicoid. This one is made for the Canon FD. On the rear (camera side), I don't see any screws that are holding the mount in place. Does anyone have any tips on how to remove that mount? Thanks for any help.


Reply

I have a TC just like yours. I've never dismantled it, though. But I have dismantled other lenses with the breechlock ring. Typically, you'll find a small set screw in the side of the ring. When you remove the screw, the ring can unscrew from the back of the lens. After you've done this, you'll probably see some screws on the back of the TC that, once you take them loose, you'll be inside the TC by that point. Look for spanner notches on the interior element group. If you can unscrew the group, this may get you to where you want to be. Same goes for the front of the TC. Remove the screws that are holding the camera mount in place and remove the mount. If this reveals spanner slots, then try removing the front group. This is guesswork on my part because I don't know if the Vivitar 7-element macro converter has more than one group of elements. But if it does, then the other one will probably have to be removed from the front. I'm guessing. Cool


Reply

The screws are often hidden under the flanges. You need to turn the mount to see them.