MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

PK Speedbooster + M42 adapter.
Ver tema anterior :: Ver tema siguiente  


Reply

Thinking of getting a Speedbooster (Make undecided as yet) and I was wondering if I could kill two birds with one stone.My Legacy Lenses are a mixture of M42 and PK mounts,so if I bought a PK to M4/3 Speedbooster would I be able to use it for M42 lenses by fitting one of those small PK to M42 ring type adapters meant for Pentax cameras?? Has anyone tried this?


Reply

I have a EOS speedbooster that I use with EOS-PK & EOS M42 adapters. When I got it there wasn't a PK speedbooster made.
It works very well & can also be adapted to quite a few other mounts if required. The lack of electronic communication would probably be a pain for EOS lenses, but I don't have any of those Smile


Reply

I've tried the same, but with a simple adaptor not a speed booster as I also have all m42 or pk.

From my experience, I would say that if you are going down that route, try the Pentax OE ring convertor rather than a copy, as I did. The combination of the Chinese m42 to PK, on to a PK to m4/3 adaptor was too much to ask in terms of tolerances. Light was getting in.

Pentax OE ring convertors seem to be around £35, and say K&F boosters are now around £65. So the costs have narrowed somewhat.

Having said that, one layer of insulating tape around the joint of the combo I tried was effective, but not a great look. I junked it, but it was only a few quid to try it out.

I hope that gives some food for thought Eddie.


Reply

Thanks for the feedback and apologies for *Forgetting* I had posted this question (age has its problems!)

Just as a parallel exercise I tried fitting an A mount to m4/3 adapter with the M42 to A mount adapter,it was a complete shambles and too much too expect.Possible the Cheapo A mount to M4/3 adapter was to blame.


Reply

What вould be the difference between MF-->FF reducer x0.7 and FF-->MFT reducer x0.7?


Reply

baychlen escribió:
What вould be the difference between MF-->FF reducer x0.7 and FF-->MFT reducer x0.7?


Mainly the mounts & the diameter I think Smile
I think optically the same arrangement can be used, but the front & rear flange distances will probably be critical.


Reply

Sciolist escribió:
...

...., and say K&F boosters are now around £65. So the costs have narrowed somewhat.

.....


I have no info about K&F manufacturing speedboosters ? only "dumb" (but very good) adapters ... plse elaborate? Wink
TIA


Reply

Rigel escribió:
Sciolist escribió:
...

...., and say K&F boosters are now around £65. So the costs have narrowed somewhat.

.....


I have no info about K&F manufacturing speedboosters ? only "dumb" (but very good) adapters ... plse elaborate? Wink
TIA


Yes, they make them. I see them on ebay at least.


Reply

Sciolist escribió:
Rigel escribió:
Sciolist escribió:
...

...., and say K&F boosters are now around £65. So the costs have narrowed somewhat.

.....


I have no info about K&F manufacturing speedboosters ? only "dumb" (but very good) adapters ... plse elaborate? Wink
TIA


Yes, they make them. I see them on ebay at least.


Not on my e-bay Wink .. Only dumb adapters and a couple of of auto but no "speed booster" nor "focal reducer" .
Not listed on the representative's web site either https://www.kentfaith.com/
Will inquire with another UK representative.


Reply

Rigel escribió:
Sciolist escribió:
Rigel escribió:
Sciolist escribió:
...

...., and say K&F boosters are now around £65. So the costs have narrowed somewhat.

.....


I have no info about K&F manufacturing speedboosters ? only "dumb" (but very good) adapters ... plse elaborate? Wink
TIA


Yes, they make them. I see them on ebay at least.


Not on my e-bay Wink .. Only dumb adapters and a couple of of auto but no "speed booster" nor "focal reducer" .
Not listed on the representative's web site either https://www.kentfaith.com/
Will inquire with another UK representative.


Rigel, apologies. I've had a check myself. It's Camdiox ,not K&F.


Reply

No problem ... this can happen Wink

BTW do you have any experience with Camdiox speed boosters (I want to try an M42 to NEX)


Reply

Rigel escribió:
No problem ... this can happen Wink

BTW do you have any experience with Camdiox speed boosters (I want to try an M42 to NEX)


No Rigel, but if you've not come across a test, Simon Hawkett has tested one with Takumar's. It's the best I could find when I was hunting around -

https://simonhawketts.com/2014/03/29/camdiox-canon-eos-to-sony-nex-focal-reducer-review/


Reply

Thanks .. I found that one too but I'll maybe open a new thread about using "stacked" adapters. There are some thing I don't completely understand Wink