| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
1kgcoffee
 Registrado: 16 Mayo 2014 Mensajes: 51
|
 Publicado: Mar Nov 15, 2016 4:37 am Asunto: What developing reel and tank to get? |
|
 Publicado: Mar Nov 15, 2016 4:37 am Asunto: What developing reel and tank to get? |
|
|
1kgcoffee wrote:
I'm interested in processing 35mm and 120 film. Got a changing bag so far but no tank and reel. What do you folks suggest?
Are the soviet bakelite ones a good choice?
Steel or plastic?
-thanks in advance,
1kgcoffee |
|
| Volver arriba |
|
 |
miran
 Registrado: 01 Ago 2012 Mensajes: 1364 Ubicación: Slovenia
|
 Publicado: Mar Nov 15, 2016 8:36 am Asunto: |
|
 Publicado: Mar Nov 15, 2016 8:36 am Asunto: |
|
|
miran wrote:
I have a plastic patterson tank and reel. Works well enough. 120 film is a little fiddly to get on but with some practice (actually a lot of it) you slowly get better at it. _________________ my flickr stream |
|
| Volver arriba |
|
 |
cooltouch
 Registrado: 15 Ene 2009 Mensajes: 9096 Ubicación: Houston, Texas
|
 Publicado: Mar Nov 15, 2016 2:35 pm Asunto: |
|
 Publicado: Mar Nov 15, 2016 2:35 pm Asunto: |
|
|
cooltouch wrote:
I also have a Paterson tank, a Super System 4. I have an old Jobo model 1236 that handles the same amount of film (up to two 35mm or one 120/220), which I'm replacing with the Paterson. The Jobo used to work fine, but its gasket has gotten hard and it leaks now, and Jobo no longer makes a replacement for it. Thankfully, the Paterson doesn't leak.
I also find the reels to be somewhat fiddly for 120, but the Jobo reels were just as bad, if not worse. Practice, practice. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Volver arriba |
|
 |
tb_a
 Registrado: 26 Ene 2010 Mensajes: 3679 Ubicación: Austria
Expire: 2019-08-28
|
 Publicado: Mar Nov 15, 2016 3:45 pm Asunto: |
|
 Publicado: Mar Nov 15, 2016 3:45 pm Asunto: |
|
|
tb_a wrote:
+1 for the Paterson tank. _________________ Thomas Bernardy
Manual focus lenses mainly from Minolta, Pentax, Voigtlaender, Leitz, Topcon and from Russia (too many to be listed here). |
|
| Volver arriba |
|
 |
dan_
 Registrado: 05 Dic 2012 Mensajes: 1070 Ubicación: Romania
Expire: 2016-12-19
|
 Publicado: Mar Nov 15, 2016 7:34 pm Asunto: Re: What developing reel and tank to get? |
|
 Publicado: Mar Nov 15, 2016 7:34 pm Asunto: Re: What developing reel and tank to get? |
|
|
dan_ wrote:
| 1kgcoffee escribió: |
| ...Are the soviet bakelite ones a good choice?... |
Some of them are. I have 2 bakelite 120 tanks for single film that can use 125mm of solution. They are the best I have for single-use developer (with the exception of my Jobo tanks, also good for single-use developer, but in the CPE2 developing machine).
You may as well consider the day-light loading tanks (a bit more expensive, if you can find them):
http://www.pbase.com/molok/image/156740429
I had an 120 film Rondinax 60 tank. It was very convenient in use (the simplest loading system) and had a very small capacity, also good for single-use developer. Unfortunately now is broken (bakelite).  |
|
| Volver arriba |
|
 |
Mr G
 Registrado: 27 Ene 2014 Mensajes: 187 Ubicación: London & Essex
|
 Publicado: Lun Dic 05, 2016 3:01 pm Asunto: |
|
 Publicado: Lun Dic 05, 2016 3:01 pm Asunto: |
|
|
Mr G wrote:
+1 for the Agfa Rondinax 35 & 60, also look out for Kent and Essex versions which are similar but generally cheaper. _________________ EVEN A BLIND SQUIRREL FINDS A NUT NOW AND THEN! |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|