| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
tileman
Registrado: 18 Sep 2016 Mensajes: 12 Ubicación: uk
|
 Publicado: Dom Sep 18, 2016 8:17 am Asunto: Minolta MD ROKKOR 1.4 50MM Fungus |
|
 Publicado: Dom Sep 18, 2016 8:17 am Asunto: Minolta MD ROKKOR 1.4 50MM Fungus |
|
|
tileman wrote:
Hi, I have just bought this lens knowing that it had some degree of fungus, however the fungus is inside the front element group, my question is has anyone opened this sealed group to clean inside, if so please advise method.
These pics show the encapsulated front element design, in the second photo there are 6 x pins that look like they are small rivets.

Editado por última vez por tileman el Dom Sep 18, 2016 8:35 am; editado 1 vez en total |
|
| Volver arriba |
|
 |
tileman
Registrado: 18 Sep 2016 Mensajes: 12 Ubicación: uk
|
 Publicado: Dom Sep 18, 2016 8:33 am Asunto: Photos |
|
 Publicado: Dom Sep 18, 2016 8:33 am Asunto: Photos |
|
|
tileman wrote:
The photos displayed OK in the Post preview, but not when I had submitted the Post, I did a reply asking what was wrong and the photos were there, I deleted the reply and they were gone again.
Help please. |
|
| Volver arriba |
|
 |
miran
 Registrado: 01 Ago 2012 Mensajes: 1364 Ubicación: Slovenia
|
 Publicado: Dom Sep 18, 2016 8:58 am Asunto: Re: Photos |
|
 Publicado: Dom Sep 18, 2016 8:58 am Asunto: Re: Photos |
|
|
miran wrote:
| tileman escribió: |
The photos displayed OK in the Post preview, but not when I had submitted the Post, I did a reply asking what was wrong and the photos were there, I deleted the reply and they were gone again.
Help please. |
Default forum behaviour designed to fight spam.
As for the fungus problem, I don't think it's worth it or even possible to open this unit. Or maybe you can open it, but then you won't be able to put it back together without specialist tools. I have a 50/2.0 with the same problem (similar construction) and gave up trying to fix it... _________________ my flickr stream |
|
| Volver arriba |
|
 |
tileman
Registrado: 18 Sep 2016 Mensajes: 12 Ubicación: uk
|
 Publicado: Dom Sep 18, 2016 11:00 am Asunto: |
|
 Publicado: Dom Sep 18, 2016 11:00 am Asunto: |
|
|
tileman wrote:
Cheers Miran, you are probably correct, I don't think the fungus is bad enough to affect images, but I will know when the adaptor comes. |
|
| Volver arriba |
|
 |
tileman
Registrado: 18 Sep 2016 Mensajes: 12 Ubicación: uk
|
 Publicado: Jue Sep 22, 2016 5:36 am Asunto: Anyone out there !!!!! |
|
 Publicado: Jue Sep 22, 2016 5:36 am Asunto: Anyone out there !!!!! |
|
|
tileman wrote:
Surely someone has stripped one of these lens groups on this very popular lens that is prone to fungus. |
|
| Volver arriba |
|
 |
Gardener
 Registrado: 22 Sep 2013 Mensajes: 949 Ubicación: USA
|
 Publicado: Vie Sep 23, 2016 2:12 pm Asunto: |
|
 Publicado: Vie Sep 23, 2016 2:12 pm Asunto: |
|
|
Gardener wrote:
May be someone did, but the reality is that people who are capable of doing quality work on lenses also know what to stay away from. |
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Vie Sep 23, 2016 5:00 pm Asunto: |
|
 Publicado: Vie Sep 23, 2016 5:00 pm Asunto: |
|
|
Lloydy wrote:
Those six rivets would probably be spun rather than hammered / pressed to secure them, and more than likely all six would be spun together in a machine with six spinning heads to ensure they pull down evenly. And there's less likelihood of operator error in the manufacturing process. I worked in a factory for a short time where they made time switches, and the tiny motor casings were riveted in this manner to ensure they went together evenly.
I really wouldn't take it apart unless you have the right tools and skills to put it back together. Although modern industrial adhesives might be good enough to do away with the rivets? _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
tileman
Registrado: 18 Sep 2016 Mensajes: 12 Ubicación: uk
|
 Publicado: Lun Sep 26, 2016 9:39 am Asunto: |
|
 Publicado: Lun Sep 26, 2016 9:39 am Asunto: |
|
|
tileman wrote:
| Lloydy escribió: |
Those six rivets would probably be spun rather than hammered / pressed to secure them, and more than likely all six would be spun together in a machine with six spinning heads to ensure they pull down evenly. And there's less likelihood of operator error in the manufacturing process. I worked in a factory for a short time where they made time switches, and the tiny motor casings were riveted in this manner to ensure they went together evenly.
I really wouldn't take it apart unless you have the right tools and skills to put it back together. Although modern industrial adhesives might be good enough to do away with the rivets? |
Cheers Lloydy, the fungus isn't too bad and certainly doesn't affect the images, not that I can see anyway, I just like my kit to be in top condition. |
|
| Volver arriba |
|
 |
bghomofaber
 Registrado: 03 Mar 2016 Mensajes: 154
|
 Publicado: Lun Sep 26, 2016 10:29 am Asunto: |
|
 Publicado: Lun Sep 26, 2016 10:29 am Asunto: |
|
|
bghomofaber wrote:
| Lloydy escribió: |
Those six rivets would probably be spun rather than hammered / pressed to secure them, and more than likely all six would be spun together in a machine with six spinning heads to ensure they pull down evenly. And there's less likelihood of operator error in the manufacturing process. I worked in a factory for a short time where they made time switches, and the tiny motor casings were riveted in this manner to ensure they went together evenly.
I really wouldn't take it apart unless you have the right tools and skills to put it back together. Although modern industrial adhesives might be good enough to do away with the rivets? |
Aren't such units laser heat-welded? I have seen it done with knives scales, after such welding I was told they are permanently attached. I have two groups like these as well, I tried to puncture one at a lens junction point I made two holes, pouring inside cleaning liquid with a needle.
Alas I ended up scratching one lens due to poor handling of the needle, such groups stupid assembly ends up making me nervous so I didn't act with the usual prudence.
It surely is a cost saving measure but a repair implies substitution. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|