MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

RMC Tokina 24mm 2,8 aperture problem
Ver tema anterior :: Ver tema siguiente  


Reply

Hi! Bought a RMC Tokina 24mm 2,8 from the local market. I had plans to use it in front of my Canon 7D. Tokina have a Minolta MD mount. Maybe I am doing something wrong but I suspect that something is broken. If I move the aperture ring nothing don't move. If I press/move the lever on the mounting side of the lens, still nothing. I am pretty sure that the lever on the mounting side should close the aperture!?? Am I wrong? Any tricks? I am pretty noob with manual lenses, especially with Minolta lenses.


Reply

1. By the sound of it the lens has oily aperture and will require service.
2. MD mount is not a good option for Canon EF to begin with.


Reply

Gardener escribió:
1. By the sound of it the lens has oily aperture and will require service.
2. MD mount is not a good option for Canon EF to begin with.


Why MD mount isn't good option for EF mount? Rolling Eyes


Reply

Because MD register distance is shorter than EF, meaning that you can't use a simple glassless adapter and achieve focus past few feet if that.


Reply

There is an excellent Wiki page about flange distances for all types of lens mounts and their adapters.
Shouldn't this be in a sticky or is it already there ?

here
https://en.wikipedia.org/wiki/Flange_focal_distance