| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
valjo
 Registrado: 10 Oct 2008 Mensajes: 68 Ubicación: Bulgaria
|
|
| Volver arriba |
|
 |
Excalibur
 Registrado: 19 Jul 2009 Mensajes: 5018 Ubicación: UK
Expire: 2014-04-21
|
 Publicado: Lun Jun 08, 2015 6:50 pm Asunto: |
|
 Publicado: Lun Jun 08, 2015 6:50 pm Asunto: |
|
|
Excalibur wrote:
All I can think of:- is drilling a small hole and inserting a self tapping screw to screw it out or if the end is blocked you should have enough bite to unscrew...but this depends if the screw is not locked in with some locking fluid originally. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Volver arriba |
|
 |
valjo
 Registrado: 10 Oct 2008 Mensajes: 68 Ubicación: Bulgaria
|
 Publicado: Lun Jun 08, 2015 7:18 pm Asunto: |
|
 Publicado: Lun Jun 08, 2015 7:18 pm Asunto: |
|
|
valjo wrote:
the broken part is very hard metal
it can not be drilled
already tried
 _________________ Canon D60
3.5/135 Jupiter 37A |
|
| Volver arriba |
|
 |
Pete
 Registrado: 01 Feb 2011 Mensajes: 240 Ubicación: Denver, San Jose
|
 Publicado: Lun Jun 08, 2015 8:45 pm Asunto: |
|
 Publicado: Lun Jun 08, 2015 8:45 pm Asunto: |
|
|
Pete wrote:
First a nice soak in WD-40 to loosen it. Now I see a small edge where the head broke off. I would use a small chisel on bigger screws but you may be able to use an old tiny screw driver to tap this edge in a counter clockwise direction. A small vise would help to hold the piece but don't squeeze it too hard.
Pete. _________________ "As God is my witness, I thought turkeys could fly!!!"
www.pete.3rdtrick.com |
|
| Volver arriba |
|
 |
bychance
 Registrado: 24 Abr 2013 Mensajes: 348 Ubicación: Kent, England
|
 Publicado: Lun Jun 08, 2015 11:41 pm Asunto: |
|
 Publicado: Lun Jun 08, 2015 11:41 pm Asunto: |
|
|
bychance wrote:
I saw a neat trick by Jesito i think it was, where he melted the end of a plastic biro and pushed it into a screw head that was broken and the plastic took up all of the shape of the remaining head of the screw. This gave just enough grip for the screw to be removed.
Might be worth a try.
Steve. _________________ I got where I am by avoiding where I was going.
Now where was I? |
|
| Volver arriba |
|
 |
Gardener
 Registrado: 22 Sep 2013 Mensajes: 949 Ubicación: USA
|
 Publicado: Jue Jun 11, 2015 4:04 pm Asunto: |
|
 Publicado: Jue Jun 11, 2015 4:04 pm Asunto: |
|
|
Gardener wrote:
I've been able in the past to drill through a stuck set screw with 1/32" bit and get it out. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|