| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
VLR
 Registrado: 05 Mar 2015 Mensajes: 86
|
 Publicado: Lun Mayo 04, 2015 8:51 pm Asunto: Vivitar Series 1 28-90 mm f/2.8-3.5 with strong astigmatism |
|
 Publicado: Lun Mayo 04, 2015 8:51 pm Asunto: Vivitar Series 1 28-90 mm f/2.8-3.5 with strong astigmatism |
|
|
VLR wrote:
Hi everyone,
so I recently acquired a very nice Vivitar S1 28-90 mm (Komine, 28xxxxxx) with minimal signs of use. The lens came with a slightly loose front element or second element, which was easy to fix by tightening three meade screws. Since I always like to check what I've bought, I shot the usual test chart. And this is what I got at 50 mm f/3.2 (it's similar at 28 and 90 mm):
Right corner
Left corner
As you can see, the lens delivers good results on the right side. What you can't see is that the center is about the same - pretty sharp, no problems. But the left side shows softness and horrible astigmatism! I double checked if the camera was perpendicular to the chart, shot it at different angles and checked if the mount was straight and solid - all good. Because I originally fastened the front element, I tried to reseat it by loosening up the screws and fastening one of them a little more than the others, but to no avail. There's little movement anyway. The front lens element seems to be centered by some other means and the screws just hold it in place. I concluded that this probably isn't the problem, but can't totally exclude it.
I'm out of ideas for now. Any of the optics gurus around here got a tip for me  _________________ http://vintagelensreviews.com/
Reviews of vintage Minolta SR mount lenses and more |
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Lun Mayo 04, 2015 8:59 pm Asunto: |
|
 Publicado: Lun Mayo 04, 2015 8:59 pm Asunto: |
|
|
Lloydy wrote:
By 'meade screws' are you referring to screws that are behind the name ring? I haven't had mine apart, but those screws are possibly for infinity adjustment ? _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
VLR
 Registrado: 05 Mar 2015 Mensajes: 86
|
 Publicado: Mar Mayo 05, 2015 11:03 am Asunto: |
|
 Publicado: Mar Mayo 05, 2015 11:03 am Asunto: |
|
|
VLR wrote:
It's probably easiest to explain with the parts list:
http://www.boggys.co.uk/download.php?filename=Vivitar_S1_28-90mm_f2.8-3.5_Komine_PL_400dpi.pdf
I'm referring to the part number 2 ("set screws") on page 2 / PDF page 6 in the parts list. Those meade screws were loose on arrival. _________________ http://vintagelensreviews.com/
Reviews of vintage Minolta SR mount lenses and more |
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Mar Mayo 05, 2015 9:48 pm Asunto: |
|
 Publicado: Mar Mayo 05, 2015 9:48 pm Asunto: |
|
|
Lloydy wrote:
I would try loosening the screws and rotating the front lens group 180 degrees and repeating your test to see if the problem appears on the opposite side.
 _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
VLR
 Registrado: 05 Mar 2015 Mensajes: 86
|
 Publicado: Dom Mayo 10, 2015 1:36 pm Asunto: |
|
 Publicado: Dom Mayo 10, 2015 1:36 pm Asunto: |
|
|
VLR wrote:
OK, I tried to turn the front group (1) today, but I couldn't get it to move. Seems to me as one of the formerly loose set screws damaged the thread... That kind of narrows down my options
I still could loosen the whole front helicoid (a3), but I need a little bit more patience for this than I have today. _________________ http://vintagelensreviews.com/
Reviews of vintage Minolta SR mount lenses and more |
|
| Volver arriba |
|
 |
VLR
 Registrado: 05 Mar 2015 Mensajes: 86
|
 Publicado: Jue Mayo 14, 2015 12:19 pm Asunto: |
|
 Publicado: Jue Mayo 14, 2015 12:19 pm Asunto: |
|
|
VLR wrote:
OK, I got the time to play around a little, today. Turning the front group (1) by about 180° didn't change anything besides the infinity focus. I reassembled everything the way it was before and got the same images again. I then took a spanner wrench and just turned the back group (22) 90° clockwise. That made the problem way worse, but at least something changed. After trying 90° counter-clockwise from the original position and some adjustments I finally settled somewhere around 30° ccw. This is how the lens performs now:
Left corner
Right corner
Although the astigmatism is still strong, it is at least evenly distributed, now and sharpness is about equal left and right. I think it's acceptable now, but I'm also open for any ideas to make it even better!
 _________________ http://vintagelensreviews.com/
Reviews of vintage Minolta SR mount lenses and more |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|