| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
vroger
 Registrado: 23 Jul 2014 Mensajes: 623 Ubicación: MN
Expire: 2016-10-21
|
 Publicado: Jue Abr 23, 2015 2:53 am Asunto: Helicoid question |
|
 Publicado: Jue Abr 23, 2015 2:53 am Asunto: Helicoid question |
|
|
vroger wrote:
I'm hoping that someone can give me a overview of how Helicoid's are normally used? I'm looking for two things. I want something to give me canon 5d more mirror clearance, and something to allow me to get infinity with m/l39 adapters. Would a
pentax M42 Helicoid Allow me some flexibility for more lenses? And perhaps even allow me to get infinity with a m39 lens? Where would I start in locating a correct pentax M42 Helicoid?
I was thinking eos to m42 adapter, and then pentax M42 Helicoid, and lens or m42 pentax M42 Helicoid and m39 adapter and m39 lens.
Thanks for educating a nub.. :0) _________________ Roger Lund
Canon EOS-M, Fuji X-E2, Helois 44-0 Vintage, Helois 44-4, Canon FD 50mm 1.8, Jupiter 8 50mm F2, Jupiter 3 50mm F1.5, Canon Serenar 50mm 1.9, Canon 50mm 1.8 LTM, Canon Serenar 85mm F2, Leica 50mm f2 summar, E.Ludwig 50mm F2.9, Rekagon will.wetzlar 50mm 2.8,, a.schacht ulm travenar 135mm F3.5, CZJ 29mm 2.8 Hoya 28mm 2.8, CZ Tessar 50mm 2.8, MIR 37mm. 2.8, Porst Color Reflex MC 50mm 1.7, Vivitar 28mm 2.8 mc cf
http://photography.rogerlund.net
For sale: Canon EOS-M and MF Adapters.
Editado por última vez por vroger el Jue Abr 23, 2015 9:10 pm; editado 1 vez en total |
|
| Volver arriba |
|
 |
duckrider
 Registrado: 11 Dic 2013 Mensajes: 437 Ubicación: Germany
|
 Publicado: Jue Abr 23, 2015 5:02 am Asunto: |
|
 Publicado: Jue Abr 23, 2015 5:02 am Asunto: |
|
|
duckrider wrote:
Flange to film or sensor for M39 lenses is 28.8mm.
Canon EF is 44mm.
So You have to press M39 lenses 15,2mm INTO Your EOs. I don't see any space for helicoid and M42 adaptere, do You?
http://en.wikipedia.org/wiki/Flange_focal_distance
Thomas _________________ T*homas
(from the origin land of Zeiss, an obligation )
Zeiss ZF 3.5/18, 2.8/25, 2.0/35, 2/50macro, 1.4/50, 1.4/85, 2/100macro
Nikon Df, F2AS, F2A, F3/T, FM
ALPA 11Si, Angulon 2,8/35 ; Xenar 1,9/50 ; Tele-Tessar 4/200
Leica R3 SAFARI Safari Lenses 2.8/28 ; 2/50 ; 4/180
Rolleiflex SL 350 , Zeiss 2,8/16 ; 4/18 ; 2,8/25 ; 2,8/35 ; 1,4/35 ; 1,8/50 ; 2,8/85 ; 1,4/85 ; 4/135 ; 4/200
Leica M9-P, Leica M4-2, Tri-Elmar "Wate", Distagon 2,8/21, Biogon 2,8/28, Biogon 2/35, Planar 2/50, Tessar 4/85, M-Elmar 50mm, Summicron 90
Sony alpha 7r & adapters for all lenses above |
|
| Volver arriba |
|
 |
calvin83
 Registrado: 12 Abr 2009 Mensajes: 7740 Ubicación: Hong Kong
|
 Publicado: Jue Abr 23, 2015 5:22 am Asunto: |
|
 Publicado: Jue Abr 23, 2015 5:22 am Asunto: |
|
|
calvin83 wrote:
Short answer:
Shave the mirror of your 5D to get little more clearance.
Use m/l39 on your EOS-M to get infinity. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Volver arriba |
|
 |
DConvert
 Registrado: 12 Jun 2010 Mensajes: 984 Ubicación: Essex UK
|
 Publicado: Jue Abr 23, 2015 11:19 am Asunto: |
|
 Publicado: Jue Abr 23, 2015 11:19 am Asunto: |
|
|
DConvert wrote:
| duckrider escribió: |
Flange to film or sensor for M39 lenses is 28.8mm.
Canon EF is 44mm.
So You have to press M39 lenses 15,2mm INTO Your EOs. I don't see any space for helicoid and M42 adaptere, do You?
http://en.wikipedia.org/wiki/Flange_focal_distance
Thomas |
EF-M is 18mm flange focal distance. So infinity focus should be pssible with that but not the 5D.
vroger, Helicoids are simply adjustable extension tubes, allowingthe distance between lens & camera body to be adjusted within a range. The further away the lens is the closer it focuses, ( how much depends on the lens - longer focal length lenses have to move farther to reduce focus). Flange focal distance is the distance behind the mounting flange that the lens reaches infinity focus, nothing in the universe is beyond infinity so having the sensor closer than that will put everything OOF.
Stacking a number of adapters will increase the distance from the lens to the sensor, and could easily make infinity focus imposible - in some cases it may even make the farthest point of focus within the lens so You'll never focus on any subject. Ideally you want the total distance across the mounts of your adapter stack with the helicoid reduced to be equal to (or slightly shorter than) the difference between lens flange focal distance & camera flange distance. Thats 10.8mm for m39 on the EF-M (rather short for all you want to fit) and as Tom says minus 15.2mm for the standard EF. If the total is longer than this infinity focus will not be possible (without added lenses) but closer subjects might still be practical. |
|
| Volver arriba |
|
 |
vroger
 Registrado: 23 Jul 2014 Mensajes: 623 Ubicación: MN
Expire: 2016-10-21
|
 Publicado: Jue Abr 23, 2015 12:53 pm Asunto: |
|
 Publicado: Jue Abr 23, 2015 12:53 pm Asunto: |
|
|
vroger wrote:
| DConvert escribió: |
| duckrider escribió: |
Flange to film or sensor for M39 lenses is 28.8mm.
Canon EF is 44mm.
So You have to press M39 lenses 15,2mm INTO Your EOs. I don't see any space for helicoid and M42 adaptere, do You?
http://en.wikipedia.org/wiki/Flange_focal_distance
Thomas |
EF-M is 18mm flange focal distance. So infinity focus should be pssible with that but not the 5D.
vroger, Helicoids are simply adjustable extension tubes, allowingthe distance between lens & camera body to be adjusted within a range. The further away the lens is the closer it focuses, ( how much depends on the lens - longer focal length lenses have to move farther to reduce focus). Flange focal distance is the distance behind the mounting flange that the lens reaches infinity focus, nothing in the universe is beyond infinity so having the sensor closer than that will put everything OOF.
Stacking a number of adapters will increase the distance from the lens to the sensor, and could easily make infinity focus imposible - in some cases it may even make the farthest point of focus within the lens so You'll never focus on any subject. Ideally you want the total distance across the mounts of your adapter stack with the helicoid reduced to be equal to (or slightly shorter than) the difference between lens flange focal distance & camera flange distance. Thats 10.8mm for m39 on the EF-M (rather short for all you want to fit) and as Tom says minus 15.2mm for the standard EF. If the total is longer than this infinity focus will not be possible (without added lenses) but closer subjects might still be practical. |
Thanks for the explanation of Helicoids. If it's just a adjustable tube that makes sense. Thinking my only option would be a teleconverter that has more clearance for some M42 lenses. _________________ Roger Lund
Canon EOS-M, Fuji X-E2, Helois 44-0 Vintage, Helois 44-4, Canon FD 50mm 1.8, Jupiter 8 50mm F2, Jupiter 3 50mm F1.5, Canon Serenar 50mm 1.9, Canon 50mm 1.8 LTM, Canon Serenar 85mm F2, Leica 50mm f2 summar, E.Ludwig 50mm F2.9, Rekagon will.wetzlar 50mm 2.8,, a.schacht ulm travenar 135mm F3.5, CZJ 29mm 2.8 Hoya 28mm 2.8, CZ Tessar 50mm 2.8, MIR 37mm. 2.8, Porst Color Reflex MC 50mm 1.7, Vivitar 28mm 2.8 mc cf
http://photography.rogerlund.net
For sale: Canon EOS-M and MF Adapters. |
|
| Volver arriba |
|
 |
philslizzy
 Registrado: 07 Ago 2012 Mensajes: 4753 Ubicación: Cheshire, England
|
 Publicado: Jue Abr 23, 2015 8:54 pm Asunto: |
|
 Publicado: Jue Abr 23, 2015 8:54 pm Asunto: |
|
|
philslizzy wrote:
No way on earth to use LTM39 lenses on a Canon DSLR and get infinity.
Someone could make a lensed adaptor. To my knowlege there isnt one and if there were it wouldn't be terribly good quality. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|