MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Nikon F50 and pre-ai 50/1.4
Ver tema anterior :: Ver tema siguiente  


Reply

Anyone tried if it fits?


Reply

The AI lenses have a long cutout at the rear of the aperture ring which pushes the AI switch on the camera into position, and on older cameras it couples with the metering. Non AI lenses don't have this and if mounted could press the AI coupler. Potentially causing damage.

I have tried with 4 of my pre AI. One has no impact on the AI switch but 3 others press on it and make it difficult to change aperture.

If you mount the lens set on its minimum aperture in theory you only need to set the aperture in the camera, but the AI switch will be in the wrong position.

My advice - Dont do it.


Reply

F50 doesn't have an ai-switch but there is a minimum aperture switch opposite where ai swithch usually is.

I think some pre-ai can be fitted but don't know exactly which lenses have so thin aperture ring that fits between the mount and the switch?


Reply

This page says no. https://www.nikonians.org/reviews/nikon-slr-camera-and-lens-compatibility