MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Problem with Plustek 7500i SE
Ver tema anterior :: Ver tema siguiente  


Reply

Hello Folks,

This may (or may not) be a problem with my Plustek 7500i SE.

Here's the problem.

I scan successfully but have some very small lines going across the page diagonally,
which when I enlarge the picture these lines are actually words, saying 'Arc Soft Laser Imaging'.

And I can't seem to remove them. Is this because I am using the scanner in 'demo' mode?

It asks for the 'product key' for Windows 7, which I do not have - it's a 25 digit number usually found
on the rear of the laptop - it is there but can not be read because it has worn off. So I do not enter the
'product key'.

My question is: Is not putting in the product key number causing the scanner to be only available in 'demo' mode,
and is this in turn causing the diagonal lines of 'Arc Soft Laser Imaging' across the scanned image?

Has anyone had the same problem, and do you have a solution please?

Kind regards, and a belated Happy New Year to you all...Paul.


Reply

ArcSoft does produce some imaging software. I think you have a trial copy of some ARCSOFT application. http://www.arcsoft.com/index.html. I don't think they have scanner software, but maybe the scanner is sending the files to an editing program. Look in your programs directory to see if you have an ARCSOFT directory, and what software is there. Also look at your scanner application. If you have purchased an application then it just needs registration.

I use VUESCAN, which is configured to open my scan files in Irfanview.

Just my thoughts,

Phil