MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Help with Pentacon electric 135mm/2.8
Ver tema anterior :: Ver tema siguiente  


Reply

Does anyone have a description on how to disassamble Pentacon Electric 135 2.8 , I can only find desscriptions for the older models (or the Meyer ones).

I have taken away the mount, but now I'm lost...


Reply

I have a Pentacon auto 2.8/135 which might be similar. I cleaned and relubricated the helicoids and gave the interior a good "clean" but I didn't touch the diaphragm assembly.

How far do you want to go ?


Reply

The Pentacon auto and Pentacon electric seem to be very similar - simply from looking at web pictures.

Here's a description (no pictures) for the auto :

http://forum.manualfocus.org/viewtopic.php?id=80

If you really need some pics I could always take mine (the auto) apart.
A few dust particles have appeared since cleaning and testing it. I'm thinking of selling so another quick clean wouldn't do any harm.


Reply

Hehe, actually I was going to clean the diaphragm, because I thought they were oily. The aperture got stuck sometimes.

But I found out the problem was something else. There's a spring a bit down in the lens that is hold by a screw. I think it's suppose to make the diaphragm open wide again after a shot when the auto is turned on. I unscrewed that one. I think the spring is bad or something, because now the aperture works like a charm in the manual position. (I also broke of something connected to the auto/manual switch that looked like some small elctric thing, but since I don't use the auto it's totally ok).

So, I opened the lens and took two parts out and now it works great in manual position Wink But still... I better save the leftovers.

Sichko, If you can tell how to do it anyway it would be nice - probably need it in the future. First thing, is it possible to take the lenshood of?


Reply

sichko escribió:
The Pentacon auto and Pentacon electric seem to be very similar - simply from looking at web pictures.

Here's a description (no pictures) for the auto :

http://forum.manualfocus.org/viewtopic.php?id=80

If you really need some pics I could always take mine (the auto) apart.
A few dust particles have appeared since cleaning and testing it. I'm thinking of selling so another quick clean wouldn't do any harm.


Great, thanks. Dont take yours apart, I've already put mine together! Wink


Reply

Glad you've got it back together again.

Do you still want to take the lenshood off ? If you do, let me know and I'll take a couple of pictures. It won't take long and I'll have to do it anyway - to blow away the new dust which has appeared.


Reply

sichko escribió:
Glad you've got it back together again.

Do you still want to take the lenshood off ? If you do, let me know and I'll take a couple of pictures. It won't take long and I'll have to do it anyway - to blow away the new dust which has appeared.


Sure, it would be nice to know how. I think it's in the way sometimes, it for example makes it hard to use the Cokin filterholder.


Reply

OK. I'll start a new thread - it may take me an hour or so to complete.