| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Layer-cake
 Registrado: 18 Mar 2013 Mensajes: 560 Ubicación: Cape Town
|
 Publicado: Lun Mar 10, 2014 4:43 pm Asunto: DIY tilt shift lens |
|
 Publicado: Lun Mar 10, 2014 4:43 pm Asunto: DIY tilt shift lens |
|
|
Layer-cake wrote:
Ive been thinking of building a tilt shift or at least tilt lens as it seems to be an easier undertaking!!
I picked up a Zeiss ikon Dresden kinostar 120mm series three projector lens, I was planning on selling it off but it has some lens separation bubbles on the front element so out the window goes that idea but it has given me a lens to play around with:)
I've read that its better to use a wide angle lens so I'm looking for some advice if its worth using the kinostar, it has a huge image circle which is a plus and if I understand correctly this is a petzval design lens.
I also have a tokina 24mm 2.8 that is in bad condition body wise as an option to use. |
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Lun Mar 10, 2014 5:55 pm Asunto: |
|
 Publicado: Lun Mar 10, 2014 5:55 pm Asunto: |
|
|
Lloydy wrote:
This has been my project this week as I've got a bad knee and can't get about as much, so I dragged out a Sigma Superwide2 24 / 2.8 that I'd hacked the Practika bayonet mount off and began experimenting. I posted a picture of it with a lump of roughly hacked foam stuck to the back of it just a few days ago somewhere on the forum. It worked, but it was rough and an experimental freelensing test.
The Mark 2 version is much more sophisticated. ( I'll post some pictures later on.) I found some lightweight neoprene which I glued in to a tube slightly smaller than the back of the lens so it stretches tightly on to the lens - and it's glued on, and the other end fits tightly over a Canon FD to NEX adapter without gluing. It moves on the NEX adapter so I could test it, then I just held it in place with a wrap of electrical tape. The gap between the lens and the adapter is about 8 mm and the neoprene is flexible enough to move around. It works well.
With the right glue neoprene can be glued permanently and strongly, which is what I'll do for the Mark 3. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
Layer-cake
 Registrado: 18 Mar 2013 Mensajes: 560 Ubicación: Cape Town
|
 Publicado: Lun Mar 10, 2014 8:13 pm Asunto: |
|
 Publicado: Lun Mar 10, 2014 8:13 pm Asunto: |
|
|
Layer-cake wrote:
I've seen some pretty good designs so far, one that really stood out was using a shower head as it can swivel and tighten into position, it has a very small opening though so I'm on the look out for something wider. |
|
| Volver arriba |
|
 |
Layer-cake
 Registrado: 18 Mar 2013 Mensajes: 560 Ubicación: Cape Town
|
 Publicado: Lun Mar 10, 2014 8:38 pm Asunto: |
|
 Publicado: Lun Mar 10, 2014 8:38 pm Asunto: |
|
|
Layer-cake wrote:
seems the joints are quite common, they're called ball joint adaptors but as they are quite big they could probably only be used with projector or bellows lenses. |
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Mar Mar 11, 2014 12:42 am Asunto: |
|
 Publicado: Mar Mar 11, 2014 12:42 am Asunto: |
|
|
Lloydy wrote:
This isn't bad, obviously you have to hold it in position so it's probably more freelensing without the light leaks than true tilt and shift. But actually, it's not that hard with the NEX. There's also a good bit of sideways movement as well.
This was shot with the Sigma Super-Wide 2 24 / 2.8 wide open and the lens tilted just about as far as the neoprene would go. Everything on the right is blurred and the church wall on the left is pretty good in the mid distance.
I need to get out and test it some more, get used to it. Then perfect it. But I think this 24mm lens has potential. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
ZoneV
 Registrado: 09 Nov 2009 Mensajes: 1633 Ubicación: Germany
Expire: 2011-12-02
|
 Publicado: Mar Mar 11, 2014 6:29 am Asunto: |
|
 Publicado: Mar Mar 11, 2014 6:29 am Asunto: |
|
|
ZoneV wrote:
For a DIY tilt lens I have used a tiltable halogen spot. It has a bigger usable free diameter. On my website I have only the first attempt. Second and third one looks a bit better.
But the way to sue a tiltable lamp (halogen, LED) housing is quite popular in Germany. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| Volver arriba |
|
 |
Layer-cake
 Registrado: 18 Mar 2013 Mensajes: 560 Ubicación: Cape Town
|
 Publicado: Mar Mar 11, 2014 12:46 pm Asunto: |
|
 Publicado: Mar Mar 11, 2014 12:46 pm Asunto: |
|
|
Layer-cake wrote:
| ZoneV escribió: |
For a DIY tilt lens I have used a tiltable halogen spot. It has a bigger usable free diameter. On my website I have only the first attempt. Second and third one looks a bit better.
But the way to sue a tiltable lamp (halogen, LED) housing is quite popular in Germany. |
I saw this page while looking for conversions and its a really good job, the images are good too, I was actually thinking of trying the same thing but I'm first going to see if I can find the swivel joints of the right size |
|
| Volver arriba |
|
 |
Olivier
 Registrado: 18 Feb 2009 Mensajes: 5097 Ubicación: France
Expire: 2015-08-06
|
 Publicado: Mar Mar 11, 2014 6:02 pm Asunto: |
|
 Publicado: Mar Mar 11, 2014 6:02 pm Asunto: |
|
|
Olivier wrote:
Here is a Tilt/shift DIY guide
http://cow.mooh.org/projects/tiltshift/index.html
Bendycam and Plumgercams _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|