MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Good Photo Printer- with Ink that does not dry out!?
Ver tema anterior :: Ver tema siguiente  


Reply

I used to do a lot of printing. I've worn out many Epson printers.

Now, I print much less. Problem is that the last Epson printer I bought (cost $159 USD) but the ink cost $90 for a full set.
When not in use, the ink dried up making it necessary to either buy a set and hope the printer will still work, or start over.
I'm opting to start over.

Are there any affordable photo printers that are not prone to this ink drying out issue? Willing to try Canon, etc.

Any suggestions are greatly appreciated.

Happy New Year!


Reply

Well do you want A4 exhibition prints or just good prints for the family at a cheap price as I'm still using an Epson Stylus color 600.....since this original purchase have picked up Epson models up to the A3 2100 for peanuts (just to play with) at boot sales. Compatible cartridges for these early Epson models can be as low as £1 each and a full set (six) for the 2100 is about £8.
Sometimes I haven't used one of the printers for 6 months but hitting the clean button works even if it takes four or five cleans, so now print something simple about every 6 weeks to make sure the heads don't dry up and clog.

In the US you probably have similar suppliers, well I use these people in the Uk for compatible inks...check the cheap prices for cartridges for older Epson printers:-

http://choicestationery.co.uk/


Reply

I bought one of the first Epson Stylus 600s when they appeared. What a disastrous decision that was. Even though the output was great, because of the price of cartridges back then I was reluctant to use it much and clogging became a real problem. As time passed, other printers caught up with and passed it, but I soldiered on with the Epson, putting up with its clogging habits. More time passed and I picked up another two of these blasted things, from bootsales and freecycle, hoping to build a good, clean one from scratch, out of parts of the others. After successfully letting the magic smoke free from one, I desisted with that and bought a decent HP, which doesn't have printheads in the machine, but on the cartridges instead, so every time you change a cart you get a new printhead. Also, the cart/printheads are easy to clean even if they do clog (but clogging is much less of a problem with this one).

If anyone is mad enough to want three Epson 600s they can have them.


Reply

Kram escribió:
Any suggestions are greatly appreciated.


I use CIS continuous Ink Systems -- the savings on ink is substantial!

CIS recommends printing at least once a week to prevent clog/drying. I've gone for months without a problem in normal years, but the past year of drought I probably should have been printing once a week as recommended -- luckily several cleaning cycles worked to free clogs. My printer is Epson Stylus Photo 1400 -- the last worst clog took about ten cleaning cycles to fully clear; from then to now I've used printer at least once a week. Wink


Reply

Farside escribió:
I bought one of the first Epson Stylus 600s when they appeared. What a disastrous decision that was. Even though the output was great, because of the price of cartridges back then I was reluctant to use it much and clogging became a real problem. As time passed, other printers caught up with and passed it, but I soldiered on with the Epson, putting up with its clogging habits. More time passed and I picked up another two of these blasted things, from bootsales and freecycle, hoping to build a good, clean one from scratch, out of parts of the others. After successfully letting the magic smoke free from one, I desisted with that and bought a decent HP, which doesn't have printheads in the machine, but on the cartridges instead, so every time you change a cart you get a new printhead. Also, the cart/printheads are easy to clean even if they do clog (but clogging is much less of a problem with this one).

If anyone is mad enough to want three Epson 600s they can have them.


...but third party inks are so cheap for Epson. I've just bought another spare set of inks for my Epson 2100, a set of eight for £6.29 with free postage:-

This pack contains one each of the following replacement ink cartridges: T034140 (Black), T034240 (Cyan), T034340 (Magenta), T034440 (Yellow), T034540 (Light Cyan), T034640 (Light Magenta), T034740 (Photo Black) and T034840 (Matt Black).
http://www.choicestationery.com/special-offer-multipack-8-replacement-cartridges-25742.html