MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Hole dimension for 1/4" thread?
Ver tema anterior :: Ver tema siguiente  


Reply

Anybody knows the hole (drill dimension, pls. in mm) I need when I want to tap a 1/4" VNC (tripod socket) thread into it?


Reply

5.1mm to be exact, but 5mm is fine.

The thread is 1/4 Whitworth or 1/4 UNC ( not VNC ) The difference between Whitworth and UNC is so small that it makes no difference, but UNC taps are probably easier to get.


Reply

I'm pretty sure my Zeus book says 5.2mm for 1/4 UNC. But I'm about 900 miles away from it at the moment so I can't check. I don't have Whitworth taps, so I've always used 1/4 UNC without problems. As Lloydy says, there is almost no difference in the thread.


Reply

You have access to HIM, the great god of lenses - ZEUSS himself??? Laughing


Reply

5.1 for Whit' and 5.2 for UNC. Or 5mm will do. Wink