| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Dom Feb 27, 2011 8:04 pm Asunto: Home-made SLR to View Camera Conversion |
|
 Publicado: Dom Feb 27, 2011 8:04 pm Asunto: Home-made SLR to View Camera Conversion |
|
|
pniaouris wrote:
http://www.flickr.com/photos/pavlosfotosathgr/5400091495/
A home made (d)SLR to View Camera Conversion with Pentax P30t
and Volna 80/2,8 P6 mount .
Can mount any lens and any SLR , shift 20mm any direction , tilt limited only by the space left between camera/lens , the rail moves the front or back brace or moves itself front & back , one of the braces alone can be used as a pano head , and replacing the lens board with a film holder and mounting an enlarger lens with macro tubes on the camera converts it to a slide copier .
A lighter , smaller , stiffer , easier to handle and more handsome version is on my workbench , and will be possibly ready at about the end of March .
Editado por última vez por pniaouris el Dom Feb 27, 2011 8:09 pm; editado 1 vez en total |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Dom Feb 27, 2011 8:08 pm Asunto: Re: Home-made SLR to View Camera Conversion |
|
 Publicado: Dom Feb 27, 2011 8:08 pm Asunto: Re: Home-made SLR to View Camera Conversion |
|
|
Attila wrote:
| pniaouris escribió: |
A home made (d)SLR to View Camera Conversion with Pentax P30t
and Volna 80/2,8 P6 mount .
Can mount any lens and any SLR , shift 20mm any direction , tilt limited only by the space left between camera/lens , the rail moves the front or back brace or moves itself front & back , one of the braces alone can be used as a pano head , and replacing the lens board with a film holder and mounting an enlarger lens with macro tubes on the camera converts it to a slide copier .
A lighter , smaller , stiffer , easier to handle and more handsome version is on my workbench , and will be possibly ready at about the end of March . |
|
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Dom Feb 27, 2011 8:09 pm Asunto: |
|
 Publicado: Dom Feb 27, 2011 8:09 pm Asunto: |
|
|
Attila wrote:
Welcome! Pretty interesting cam! Please share some photos too , taken with this camera. |
|
| Volver arriba |
|
 |
rawhead
 Registrado: 09 Feb 2009 Mensajes: 1525 Ubicación: Boston, MA
Expire: 2014-04-29
|
 Publicado: Dom Feb 27, 2011 8:49 pm Asunto: |
|
 Publicado: Dom Feb 27, 2011 8:49 pm Asunto: |
|
|
rawhead wrote:
I'd love to know the build-cost and equipments for something like this. I know there are stuff on the market like the Zork adapters, but they're much too expensive... _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Volver arriba |
|
 |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Lun Feb 28, 2011 3:17 pm Asunto: |
|
 Publicado: Lun Feb 28, 2011 3:17 pm Asunto: |
|
|
pniaouris wrote:
Here are a couple of pictures made with the device .
As about the cost it is really big . This is the 3d version and as some parts were made in a machinery workshop , plans changed , lenses bought an finally found not idoneous for the purpose , column drills and other machinery bought to be able to make it home etc , it can be justified only if I can produce and sell it .
It can be made much simpler , but if I want to sell it , it must be sturdy , easy to handle , light etc . |
|
| Volver arriba |
|
 |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Lun Feb 28, 2011 3:58 pm Asunto: |
|
 Publicado: Lun Feb 28, 2011 3:58 pm Asunto: |
|
|
pniaouris wrote:
Sorry , I think info on my previous post is too limited so I continue .
About the fotos first , they are both shot using an Helios 44/2 58mm f:2
lens and a Pentax K10d .
As about making something like this , it's easy to make something less complicated ( and expensive ) using three microfocusing rails ( the stuff sold on e-bay for $12 each including postage ) , an L brace and a straight
bar of aluminium ( or even wood ) . You fasten the L brace on one rail so that it can shift right and left . It can also swing on it's fastening screw .
The second rail is fastened on the vertical leg of the L and carries a second , smaller L where you can mount the camera body by the thread
you usually mount it on a tripod . The second L can swing back and forth on it's mounting screw .
So you have the body that swings and shifts . All you need now is a plate to mount the lens , and the third rail to variate the distance between them . Use the alu bar to put them in a reasonable distance between them and focus with the rail . The lens is mounted on an old filter ring
glued in a hole on the plate , and a punch shaped bellows is mounted on both camera and lens .
As it's more difficult to explain than make , you can see some suggesting fotos here
http://www.flickr.com/groups/1557326@N22/ |
|
| Volver arriba |
|
 |
martinsmith99
 Registrado: 31 Ago 2008 Mensajes: 7029 Ubicación: S Glos, UK
Expire: 2013-11-18
|
 Publicado: Mar Mar 01, 2011 7:09 am Asunto: |
|
 Publicado: Mar Mar 01, 2011 7:09 am Asunto: |
|
|
martinsmith99 wrote:
Interesting but not sure I'll try it.
Welcome to the group. _________________ Casual attendance these days |
|
| Volver arriba |
|
 |
rawhead
 Registrado: 09 Feb 2009 Mensajes: 1525 Ubicación: Boston, MA
Expire: 2014-04-29
|
 Publicado: Mié Mar 02, 2011 4:22 am Asunto: |
|
 Publicado: Mié Mar 02, 2011 4:22 am Asunto: |
|
|
rawhead wrote:
Coool, thanks for the info. I actually might try something. What makes what YOU want to do more complicated and expensive? _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Volver arriba |
|
 |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Mié Mar 02, 2011 8:00 am Asunto: |
|
 Publicado: Mié Mar 02, 2011 8:00 am Asunto: |
|
|
pniaouris wrote:
http://www.flickr.com/photos/pavlosfotosathgr/sets/72157624108080127/
As you can see in this flickr set , it started as a toy , and it went on more and more laborious .
In the begining I wanted to play , and the cost ( and risk ) was a 40 euro
bill . Then , shift movements , parts made by specialised people , MF lenses , design errors , rised the cost up to the point that I should make a perfect machine or nothing .
And a perfect machine has to be handsome , easy to handle , rigid , light and compact . On the other hand , having a perfect machine , one can hope to sell a couple of copies , to have refunded part of the cost
for the development .
I don't still have the final thing , but I'm too close to .
As about a self made stuff , the first attempt I did worked , and it would do better , if I had mounted a couple of rails on the brace , the way I describe in my previous post . |
|
| Volver arriba |
|
 |
rawhead
 Registrado: 09 Feb 2009 Mensajes: 1525 Ubicación: Boston, MA
Expire: 2014-04-29
|
 Publicado: Mié Mar 02, 2011 8:03 am Asunto: |
|
 Publicado: Mié Mar 02, 2011 8:03 am Asunto: |
|
|
rawhead wrote:
What price range are you thinking about if you'll sell it? If it's significantly cheaper than the Zörk offerings, I will seriously consider it. _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Volver arriba |
|
 |
Scheimpflug
 Registrado: 06 Feb 2010 Mensajes: 1888 Ubicación: New Zealand / USA
Expire: 2011-11-18
|
 Publicado: Mié Mar 02, 2011 9:34 am Asunto: |
|
 Publicado: Mié Mar 02, 2011 9:34 am Asunto: |
|
|
Scheimpflug wrote:
Wow, this is really a great project!
I have to say, as a fellow P30t owner, it sure is nice to see such a humble camera being showcased for the photo shoot.
Please keep us posted here on the development of your next version! If it really does end up being "lighter, smaller, stiffer, easier to handle and more handsome", that's going to be quite a nice piece of equipment!  _________________ Sigma DP1, Nikon D40 (hers ), Polaroid x530, Pentax P30t, Pentax P50, (P30t/P50 K-A to Nikon F body mount conversion)
Nikon: 18-55/3.5-5.6 "G ED II DX" (F) Soligor: 28/2.8 (FL->F converted), 135/3.5 (F), 3x TC (F, modified) Kalimar: 28-85/3.5 (F)
Vivitar: 70-210/2.8-4.0 Version 3 (F), Tele 500/6.3 Preset (F), 19/3.8 (F) Minolta: 300/5.6 (SR/MC/MD pending F conversion)
Tamron: 28/2.8 (Adaptall) Panagor: 28/2.5 (FD) Aetna: 300/5.6 (F) Osawa: MC 28/2.8 (F)
Vintage Lenses: Dallmeyer: 1940s A.M. 14in 356mm f4 (ULF->M42) 1930s Adon Telephoto Taylor, Taylor & Hobson: 1880s Rapid Rectilinear 8 1/2 x 6 1/2 11.31in f/8 (LF->?)
Parts Lenses: Nikon 35-135/3.5-4.5 (F), Sigma 70-210/4.5 (F), Nikon 50/1.8 Series E (F) |
|
| Volver arriba |
|
 |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Mié Mar 02, 2011 4:27 pm Asunto: |
|
 Publicado: Mié Mar 02, 2011 4:27 pm Asunto: |
|
|
pniaouris wrote:
It's going to be a modular system . One brace alone is a panohead , as it can move the camera back and forth in respect to the swinging axis so that you can make it coincide with the nodal point of the lens and have no parallax . Also it should be used alone with a simple lens plate and a focusing rail for only-back-tilt-shift movements . The brace will cost ( approx ) 400 $ . Two braces for full movement possibility , accompanied by a three movements rail ( focusing by moving the back , or the lens ,
or the whole thing for makro ) will cost 800 $ . In both cases a bellows with mounts for camera and lens will come along with the brace(s) . |
|
| Volver arriba |
|
 |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Mar Jun 12, 2012 1:12 pm Asunto: |
|
 Publicado: Mar Jun 12, 2012 1:12 pm Asunto: |
|
|
pniaouris wrote:
| Scheimpflug escribió: |
Wow, this is really a great project!
I have to say, as a fellow P30t owner, it sure is nice to see such a humble camera being showcased for the photo shoot.
Please keep us posted here on the development of your next version! If it really does end up being "lighter, smaller, stiffer, easier to handle and more handsome", that's going to be quite a nice piece of equipment!  |
http://forum.mflenses.com/viewtopic.php?p=1238775#1238775
I couldn't find the original thread and opened a new one |
|
| Volver arriba |
|
 |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Sáb Oct 26, 2013 9:27 am Asunto: |
|
 Publicado: Sáb Oct 26, 2013 9:27 am Asunto: |
|
|
pniaouris wrote:
The site for "Geometry" is finally uploaded . Here's a link to it
http://bluescargo.gr/geometry/ |
|
| Volver arriba |
|
 |
sichko
 Registrado: 20 Jun 2008 Mensajes: 2475 Ubicación: South West UK
|
 Publicado: Sáb Oct 26, 2013 9:55 pm Asunto: |
|
 Publicado: Sáb Oct 26, 2013 9:55 pm Asunto: |
|
|
sichko wrote:
What a great piece of work. And impressive pictures. Congratulations. _________________ John |
|
| Volver arriba |
|
 |
pniaouris
Registrado: 22 Feb 2011 Mensajes: 36 Ubicación: Athens
|
 Publicado: Dom Oct 27, 2013 5:50 pm Asunto: |
|
 Publicado: Dom Oct 27, 2013 5:50 pm Asunto: |
|
|
pniaouris wrote:
thanks sichko |
|
| Volver arriba |
|
 |
|
|