MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Lens Butchery!! Konica Auto S 1.6 converted to Micro 4/3
Ver tema anterior :: Ver tema siguiente  


Reply

I seem to be more fascinated with the actual equipment then I am with taking photos!! Smile I am a really shite photographer even in my own opinion!! But I do love cameras and lenses and there inner workings.

This is a Konica Auto S 1.6 45mm 1.6 lens that I converted to Micro 4/3, let me start off by saying this old Konica Range finder lens was the hardest conversion I have undertaken but had alot of fun doing it Very Happy

The Camera had been in a bad drop and was really past the point of repair...............the poor thing.








The images have more glow on them then the Konica AR 50mm 1.4


Editado por última vez por Layer-cake el Mar Oct 01, 2013 3:29 pm; editado 1 vez en total


Reply

I did move it here, due I wait some more information how did you make it, if a camera in hopeless stage this is a good move to save at least a part of it.


Reply

Attila escribió:
I did move it here, due I wait some more information how did you make it, if a camera in hopeless stage this is a good move to save at least a part of it.


I don't mind the move, thought i would steer away from the actual lens section after the other posting got moved and saw a couple of other post created in this section based on conversions of some sorts.

Not alot of traffic going through the DIY section but it is applicable and I am proud of of the conversions, find much enjoyment in doing them.

As a suggestion if you find more posts along the lines of conversions moving them into it's own section will bring some additional interest in the area.

Will do a write up on the conversion, took easily about 30 hours in total.


Reply

30 hrs ?! damn lot work


Reply

Sounds quite challenging! Looking forward to reading the details.