MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Meyer Primagon 4.5/35, Kodak Technical Pan in Microdol-X
Ver tema anterior :: Ver tema siguiente  


Reply

1982 expired Tech Pan, 1986 expired Microdol-X, 1960s East German lens, 1970s East German camera (Praktica MTL5B). Exposed at 50, then developed in 1:3 M-X for 45mins with 30 secs initial agitation then stand until finish.

This is Poolside, Haverigg, about 3 miles from my house. It looks lovely and sunny when I shot these, but really, it was -1C with a horrendous wind chill factor and my fingers were turning to blocks of ice so I just set the aperture to f8, the focus to infinity then shot quickly so I could get my gloves back on.

No PP, just as they came out of my Plustek 7600i apart from resize for web, I prefer to keep the filmic look rather than to process them digitally.

#1

#2

#3

#4

#5

#6


Reply

Very nice scenery, I miss sharpness.


Reply

I prefer them without digital sharpening, it spoils the filmic quality imho, might as well shoot digital and convert it to BW if sharpness is the prime concern. For me, BW film is all about tonality; sharpness is well down the pecking order of priorities. Perhaps I can find a better sharpening tool, but I do find Nik Sharpener, while it does make them look sharper also spoils them as it introduces a digitally processed look. I look back at my earlier film work and I think I ruined most of it with digital procesing, usually sharpening has made them look processed, I would have to re-scan a lot of them before I'd want to show them now, I wish I'd just left them as they were, unsharpened.


Reply

Nice series of a favorite subject matter! Cool


Reply

Cheers Bill.


Reply

A wide range of tonality..
Promissing !

Printed on a large piece of paper it will punch !


Reply

Cheers. I wish I had a darkroom to be able to do silver prints.

Tech Pan needs special development to get a wide tonal range, I found Microdol diluted 1:3 and used at 20C works, I believe Rollei LC would work as well, you need a low contrast developer as the film is inherently high contrast.