MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Crown Graphic w.Wollensak Optar, Rada, Linhof adapter
Ver tema anterior :: Ver tema siguiente  


Reply

Finally got around to running a film through the Crown Graphic (c.1954), after owning it for more than a year - I know, disgraceful, eh?
Anyway, the results surprised and disappointed me, but it was operator error and 60 year old tech coming back to bite me in the bum.
I have a really nice adapter to allow older 6x9 rollfilm holders to sit nicely into Graphlok backs (it was designed for Linhof's International Backs, so needed just a touch of filing) and to go with that, a 1930 Rada rollfilm back -which I know works perfectly fine, having used it a fair bit in the past few years.

All these shots were handheld, because I was on my bicycle and couldn't be assed carrying the necessary substantial tripod and I reasoned the CG was designed to be a handheld camera anyway. I'd gone over the camera, free-ing up everything and getting it working the way it should. It had been lying in a cupboard/basement for some time and had even got the rangefinger optics silted up. Literally silt - gawd knows how that came about.

First one - I peered through the ground glass, noted the exact point and stance and slid in the film holder/adapter - turned out not too bad.




The second one caught me out and exhibited quite bad camera shake, and then I realised the body shutter release was causing a slight shake, as it's bit of a dodgy design. Next outing I'll be using a cable release. I managed to recover most of the damage with PS motion blur filter, but best to avoid it in the first place.




This one, I rested the camera on the parapet of the bridge and throwing caution to the winds went for a 1/15th second at f:22. Seemed to work, too.
None of them are perfect and teh only one I was actually happy with was the very first one where I'd used the GG.
This pic shows a river local me which I've never seen run dry in 20 years, but hopefully it's a temporary thing, as the rain is tummeting down here tonight and will fill it up again. It was eye-striking because of the road-like qualities of it.



Ah well, something useful learned and ready for next time.
The lens is a Wollensak Optar 135/4.7, without hood or filters - and that's something else I must address.
Film was Fomapan 100 processed in D76 1+3 stand developed for 17 minutes. Ilfosol non-hardening fixer and scanner Epson 4490 @ 2400 dpi to tiff files for working on.


Editado por última vez por Farside el Mar Oct 01, 2013 2:25 am; editado 1 vez en total


Reply

Not bad at all. Is it a 4x5 with a reducing back or a 2x3? I have a Century 2x3 and love it, never managed to get away without a tripod though.


Reply

It's the 4x5 with Graflok back and the Linhof reducer to take the slide-in rollfilm holders.
The reducer is a frame that's held in by the Graflok sliding ears and teh Rada film holder slides into that, in turn. I had my concerns about the adapter on adapter screwing with the film registration distance, but that seems to work out ok.


Reply

Hand held 4x5 graflex camera, nice work


Reply

Cheers. I find the lens takes 38mm push-on Series IV adaper and filter system.
The prices (and shipping) now being asked for these items are getting silly, so I've rummaged and found an orphaned rubber hood base ring which I can fit on to the OD of the lens and hotglue it there. On the threads of that will be the mount for a 49mm filter/hood system.