MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

That old Linhof - another one.
Ver tema anterior :: Ver tema siguiente  


Reply

I just can't help it; the CrapOldLinhof bug has bitten and I find myself in possession of another one. This time it's a 1930s Technika II (pretty much the one my Press variant was based on). Needing some work, like new bellows, so that's an interesting project for the winter. I'll probably run this on 9x12 as long as it's available, but I'm toying with the idea of removing the 9x12 back and fitting an International back in a non-destructive way, so the camera can be restored to original at any time in the future.








And this is why I like the 9x12 bodies; they're quite small and neat, chunky and compact, with a lot of capability crammed into them.


Reply

Beatiful camera. seems to be a nice project to restore it. Don't forget to show us when it' done,

Cheers,

Renato


Reply

Well, it arrived today and it's much better in the metal than the pics make it look.
It's nice to have something portable with (nearly) full movements and it occurs to me that a digiback/Pentax conversion of an old plateholder will allow me to use these movements on the dSLRs.
The bellows will do for now - there's a few pinholes in the repaired sections and some gloop/cloth will get slapped on to allow the use of them, or even just drape a blackout cloth over the entire affair if necessary. The bellows on the other 9x12 had been replaced at some time in the past couple of decades and I wonder if they'd survive being transplanted to this one. Same triple-extension bed on it, too.
Oddly enough; the Tech III (really Tech II) Press camera has a much superior design of spring back, allowing a simple slide-in of film holder or rollfilm adapter without any fuss, in exactly the same manner as a Graflex back. This Tech II back is a much more awkward affair, requiring the back door be opened and swung to the side before a film holder can be slotted down into place and there's always the very strong chance of a damage-causing accident if the door gets forcefully levered against the the holder, damaging the holder and/or the door. Not surprised this design got dropped, although I notice the early Tech IIIs in 4x5 seemed to have something similar.
So, I reckon the Press Tech III will contribute its back and possibly bellows to this one.

That Newton finder is on the wrong way around, and even the right way round, it's a mile off being accurate, the holes being slightly off-kilter. Looks like it was something somebody picked up in a camera junk shop - the only one I see that's identical to that was on an Ernemann HEAG of 1910 or thereabouts. One of those accessories that was fitted to many cameras at that time. I think I'll find a front wire frame sports finder to match the rear peepsight, or simply make one from scratch - the fitting is still there, which is a rarity itself.

More to come as things develop.


Reply

Farside,

Keep updating the news and post some pics of the revamping,


[]s,

Renato


Reply

Congrats! Very beautiful camera!
I'm sure you'll enjoy using it very much.
Have you seen the manual? You can find it here:
http://www.cameraeccentric.com/html/info/linhof_1.html
It looks like you can adapt a Kalart Range Finder to it for better hand-held use.
Kalart Range Finders can be found on ebay from time to time as replacement parts for Graflex cameras.
Kalart manual can be found here here:
http://www.cameraeccentric.com/html/info/kalart_1.html


Reply

Stephen Gandy's site is a bit sniffiy about the pre-war Linhofs, treating them as if they don't exist. The owers of Tech IIs are out on our own, having to find out what we can and piecing things together. It's no big deal, but every little bit adds to the sum total. These cameras likely suffer a bit from being of the Nazi era, but they were not Nazi cameras by any means. I don't see the same lack of interest or disdain shown towards the pre-war and wartime Leicas, for example.
I might have a go at fitting a rangefinder, but another one I've got coming will kind of make that unnecessary Smile


Reply

Farside escribió:
I might have a go at fitting a rangefinder, but another one I've got coming will kind of make that unnecessary Smile

The third one, isn't it? Laughing Laughing Laughing
Is it a IV or a V?
These Linhofs seem to create dependency. Laughing
They did in my case, for sure, as I have 3 of them as well. But they are 6x9, not 4x5 ( a IV, a Techika 70 and a Techikardan).
For shouting 4x5 or 9x12 on them (rarely, unfortunately) I use an extender back.