| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
David
 Registrado: 13 Abr 2011 Mensajes: 1869 Ubicación: Denver, Colorado
Expire: 2013-01-25
|
 Publicado: Sáb Ago 17, 2013 7:40 am Asunto: KW Camera Reflex Box |
|
 Publicado: Sáb Ago 17, 2013 7:40 am Asunto: KW Camera Reflex Box |
|
|
David wrote:
Picked up a beat-up KW Reflex Box today at a consignment store. $50, and it was a bit of a risk since the focusing glass is cracked in half and I wasn't sure if it worked. The leather is really worn but intact and the mesh around the viewing hood is in pretty good shape. I figured that since I fixed my Rolleiflex Old Standard when I got it I might try this one, too.
I don't have any photos of it yet, but here's a link to a page about this type of camera. Mine is much more rugged (read as: well loved.)
http://www.earlyphotography.co.uk/site/entry_C53.html
Long and short, it works. I have to replace a non-essential spring on the shutter cocking arm, but the lens (after a disassembly with cleaning) is a very sharp Steinhall 10.5CM 1:4.5 tessar. The shutter speeds are accurate. How I will hold it at any speed without camera shake is a mystery to me. The whole camera jerks around when the shutter actuates.
Surprisingly for an older camera in the 6X9 format, it only stops down to f16. At any rate, I'm going to try and run a roll through it this weekend or next and see how it looks. I'm pretty optimistic the results will be decent. _________________ http://www.youtube.com/user/hancockDavidM |
|
| Volver arriba |
|
 |
luisalegria
 Registrado: 07 Mar 2008 Mensajes: 6602 Ubicación: San Francisco, USA
Expire: 2018-01-18
|
 Publicado: Sáb Ago 17, 2013 1:55 pm Asunto: |
|
 Publicado: Sáb Ago 17, 2013 1:55 pm Asunto: |
|
|
luisalegria wrote:
Good find!
A 6x9 SLR is a pretty rare thing these days, in working order. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Volver arriba |
|
 |
koji
 Registrado: 21 Jul 2008 Mensajes: 2108 Ubicación: Hiroshima, Japan
Expire: 2012-12-27
|
 Publicado: Sáb Ago 17, 2013 2:16 pm Asunto: |
|
 Publicado: Sáb Ago 17, 2013 2:16 pm Asunto: |
|
|
koji wrote:
I also got it at a side walk sale a long ago, was $25 with leather case. It is missing infinity stopper pin, you can see it.
The lens is Steinheil Box-Actinar 10.5cm F6.3. It works perfectly, although the mirror is deteriorating.
Clean the transport mechanism, it scratches the film. See
 _________________ Our Home Page has 18,200 photos in 575 directories today.
Lenses: https://www.pbase.com/kkawakami/top_level_my_lenses |
|
| Volver arriba |
|
 |
David
 Registrado: 13 Abr 2011 Mensajes: 1869 Ubicación: Denver, Colorado
Expire: 2013-01-25
|
 Publicado: Dom Feb 09, 2014 7:58 am Asunto: |
|
 Publicado: Dom Feb 09, 2014 7:58 am Asunto: |
|
|
David wrote:
Well, I've used my Reflex Box a few times since I got it and all the images are soft. I realized that the mirror was (key: was) surface coated but it now silver-free. So the light is bouncing off the back of the glass and throwing off my focus. Add to that the cracked-in-half ground glass, and focusing is a problem.
So I'm going to try and figure out a solution. I think I'll try some reflective decal material on the existing glass, simply cut to size. We're talking about stuff only a few mils thick, so I'm hoping that's close enough to the original silver that it will work. It seems easier, so far, that finding a new surface-coated mirror of the correct shape.
Luis, any ideas? _________________ http://www.youtube.com/user/hancockDavidM |
|
| Volver arriba |
|
 |
luisalegria
 Registrado: 07 Mar 2008 Mensajes: 6602 Ubicación: San Francisco, USA
Expire: 2018-01-18
|
 Publicado: Dom Feb 09, 2014 3:42 pm Asunto: |
|
 Publicado: Dom Feb 09, 2014 3:42 pm Asunto: |
|
|
luisalegria wrote:
No easy solutions if you aren't up to replacing the mirror.
There may be a way to shim the groundglass . _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Volver arriba |
|
 |
Mos6502
 Registrado: 20 Jun 2011 Mensajes: 960 Ubicación: Austin
|
 Publicado: Mié Feb 12, 2014 12:14 pm Asunto: |
|
 Publicado: Mié Feb 12, 2014 12:14 pm Asunto: |
|
|
Mos6502 wrote:
The guy who sells those replacement TLR mirrors on ebay can cut you a replacement mirror to order. Get the measurements of yours, including thickness if you can, and get in touch with him. |
|
| Volver arriba |
|
 |
David
 Registrado: 13 Abr 2011 Mensajes: 1869 Ubicación: Denver, Colorado
Expire: 2013-01-25
|
 Publicado: Vie Feb 14, 2014 8:37 am Asunto: |
|
 Publicado: Vie Feb 14, 2014 8:37 am Asunto: |
|
|
David wrote:
Mos, is that eBay seller Marty1107? _________________ http://www.youtube.com/user/hancockDavidM |
|
| Volver arriba |
|
 |
Mos6502
 Registrado: 20 Jun 2011 Mensajes: 960 Ubicación: Austin
|
 Publicado: Vie Feb 14, 2014 4:07 pm Asunto: |
|
 Publicado: Vie Feb 14, 2014 4:07 pm Asunto: |
|
|
Mos6502 wrote:
Yes. I bought a mirror from him before to fix a Reflekta. He cuts the mirrors himself so conceivably he can make them any size needed. |
|
| Volver arriba |
|
 |
luisalegria
 Registrado: 07 Mar 2008 Mensajes: 6602 Ubicación: San Francisco, USA
Expire: 2018-01-18
|
 Publicado: Vie Feb 14, 2014 6:43 pm Asunto: |
|
 Publicado: Vie Feb 14, 2014 6:43 pm Asunto: |
|
|
luisalegria wrote:
FYI -
There are plastic front surface mirrors available.
http://www.bostoncraftworks.com/FrontSurface.htm
One sheet of this 1mm stock would make a LOT of camera mirrors.
Just one supplier.
1mm plastic sheet is very easy to cut accurately with Dremel tools. Should be sufficiently flat and rigid for this purpose. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Volver arriba |
|
 |
David
 Registrado: 13 Abr 2011 Mensajes: 1869 Ubicación: Denver, Colorado
Expire: 2013-01-25
|
 Publicado: Sáb Feb 15, 2014 7:18 am Asunto: |
|
 Publicado: Sáb Feb 15, 2014 7:18 am Asunto: |
|
|
David wrote:
Thank you, Mos. I sent the measurements and he's going to cut a custom mirror. I can't believe it's less than $10!
Luis, thank you, too. I've got some other repair projects that need mirrors (box cameras, mostly) and that would be perfect.
Now I just need to replace the ground glass and I'll be in good shape! _________________ http://www.youtube.com/user/hancockDavidM |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|