MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

70mm in 616 camera
Ver tema anterior :: Ver tema siguiente  


Reply

Anyone have experience with this? I have backing paper ready to tape to the back of it. If I choose to do a few extra rolls without backing paper, does anyone know a cheat sheet for how many turns each photo would need?I'm using a Kodak Vigilant Junior.

Thanks!


Reply

Nobody knows ?


Reply

Perhaps make a dummy film using print paper taped together to the correct length. attach it to the spool then with the back of the camera open, mark the paper at the roll-end then wind on and count how many turns it takes to get to the spool-end. Make a note how far you must wind each frame as each wind will be different as the spool fills up.


Reply

Wow.
Phil, that sounds great.


Reply

In fact why not make your own backing paper this way - use black paper and a chinagraph or white ink pen (a cuticle pen will work - ask the wife)


Reply

Where you got 70 mm film? I need a roll. Smile


Reply

ebay is one source: http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2054897.m570.l2632.R2.TR6.TRC2.A0.H1.X70mm+FILM&_nkw=70mm+film&_sacat=69323

Phil


Reply

Thanks Phil! So black print paper will protect the film enough if I check the red window between shots?


Reply

I hope so, it did for me but theres many different types of black paper. I used black art paper in a pad. When I did it I put a length of 35mm film onto a 127 sized backing paper.