| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Jue Ene 03, 2013 11:48 pm Asunto: Polypan F50 Review |
|
 Publicado: Jue Ene 03, 2013 11:48 pm Asunto: Polypan F50 Review |
|
|
Attila wrote:
Ian made a nice review on this film.
http://www.mflenses.com/polypan-f50-review.html |
|
| Volver arriba |
|
 |
Farside
 Registrado: 01 Sep 2007 Mensajes: 6579 Ubicación: Ireland
Expire: 2013-12-27
|
 Publicado: Vie Ene 04, 2013 10:19 pm Asunto: |
|
 Publicado: Vie Ene 04, 2013 10:19 pm Asunto: |
|
|
Farside wrote:
Doesn't surprise really; it's a film for older traffic speed cameras, I think, and quality isn't as important as being able to read the registration plate.
Makes me glad I didn't get any. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Lun Ene 07, 2013 2:01 am Asunto: |
|
 Publicado: Lun Ene 07, 2013 2:01 am Asunto: |
|
|
Attila wrote:
| Farside escribió: |
Doesn't surprise really; it's a film for older traffic speed cameras, I think, and quality isn't as important as being able to read the registration plate.
Makes me glad I didn't get any. |
+1 have to look many samples on Flickr for a while once you get a good result. |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mar Ene 08, 2013 8:35 am Asunto: |
|
 Publicado: Mar Ene 08, 2013 8:35 am Asunto: |
|
|
iangreenhalgh1 wrote:
I don't think it's for speed cameras, it's too slow, it is rated at 50, but I suspect it's actually 25. Speed camera film was rated at 400 (Ilford P4, Maco Eagle etc). I've no idea who made this film or what it was originally used for, I doubt strongly it was a copy film like Tech Pan as it lacks the sharpness and fine grain needed for that. You can tell by looking at it in it's unexposed state that it's a thinner emulsion than Fomapan, Ilford FP4 and HP5, and even comparing it to Tech Pan, which is also on a thin polyester base, you can see the polypan has much thinner emulsion.
So it's a thin emulsion on a clear polyester base, slow speed, probably 25 ISO, grainy and low resolution, I can't see what it was used for, I would think a speed camera film needed to be sharp to read numberplates.
Who made it is anyone's guess, there's some speculation if you search the net. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
Farside
 Registrado: 01 Sep 2007 Mensajes: 6579 Ubicación: Ireland
Expire: 2013-12-27
|
 Publicado: Mar Ene 08, 2013 2:30 pm Asunto: |
|
 Publicado: Mar Ene 08, 2013 2:30 pm Asunto: |
|
|
Farside wrote:
http://www.flickr.com/groups/44223278@N00/discuss/72157594528127396/
There are some decent results on that group, but I also see plenty evidence of scratching and grain, as you said.
Seems as if it's a film you wouldn't want large blowups from, but the acuity itself would be good enough for reading regy plates, for instance  _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mar Ene 08, 2013 2:46 pm Asunto: |
|
 Publicado: Mar Ene 08, 2013 2:46 pm Asunto: |
|
|
iangreenhalgh1 wrote:
I suppose it depends on what you're happy with. I found that with Microdol-X 1:3 I got almost no grain and the tonality was okay, but it still wasn't that sharp. I far prefer the results I get with FP4 and Fomapan so it's not for me.
It can make nice pics but it can never match the quality of other films that I have plenty of (I've got about 500ft of FP4 in the fridge) so it's sub-standard for me.
I had to pick that example, it has a clearly legible numberplate  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mar Ene 08, 2013 7:08 pm Asunto: |
|
 Publicado: Mar Ene 08, 2013 7:08 pm Asunto: |
|
|
Attila wrote:
| iangreenhalgh1 escribió: |
I don't think it's for speed cameras, it's too slow, it is rated at 50, but I suspect it's actually 25. Speed camera film was rated at 400 (Ilford P4, Maco Eagle etc). I've no idea who made this film or what it was originally used for, I doubt strongly it was a copy film like Tech Pan as it lacks the sharpness and fine grain needed for that. You can tell by looking at it in it's unexposed state that it's a thinner emulsion than Fomapan, Ilford FP4 and HP5, and even comparing it to Tech Pan, which is also on a thin polyester base, you can see the polypan has much thinner emulsion.
So it's a thin emulsion on a clear polyester base, slow speed, probably 25 ISO, grainy and low resolution, I can't see what it was used for, I would think a speed camera film needed to be sharp to read numberplates.
Who made it is anyone's guess, there's some speculation if you search the net. |
May an unsuccessful Chinese batch  |
|
| Volver arriba |
|
 |
Farside
 Registrado: 01 Sep 2007 Mensajes: 6579 Ubicación: Ireland
Expire: 2013-12-27
|
 Publicado: Mié Ene 09, 2013 1:05 am Asunto: |
|
 Publicado: Mié Ene 09, 2013 1:05 am Asunto: |
|
|
Farside wrote:
I might get some after all and use it with Caffenol - x as some of those results aren't bad at all. I'll store it with the thousand feet of Kodak dupe film I haven't even touched yet
Really must get around to using some of this. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Mié Ene 09, 2013 1:26 am Asunto: |
|
 Publicado: Mié Ene 09, 2013 1:26 am Asunto: |
|
|
Attila wrote:
| Farside escribió: |
I might get some after all and use it with Caffenol - x as some of those results aren't bad at all. I'll store it with the thousand feet of Kodak dupe film I haven't even touched yet
Really must get around to using some of this. |
look forward it !! |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mié Ene 09, 2013 6:21 am Asunto: |
|
 Publicado: Mié Ene 09, 2013 6:21 am Asunto: |
|
|
iangreenhalgh1 wrote:
Remember you're looking at web size samples, which does a lot to hide it's softness and grain. The lack of resolution makes it limited to closer range shots, when you shoot at infinity, you really see the softness. Also, remember you're looking at cherry picked examples, I shot hundreds of images with it and I'd say maximum 25% were any good, in a lot of circumstances it just produces bad results with bad tonality, and you have to avoid high contrast light as it lacks the dynamic range to cope with it, you also have to avoid bright highlights as it lacks any halation and doesn't hold onto highlight details ((or shadow detail either). It's crap, basically, grain is like Tri-X pushed to 1600 when developed in RO9, it needs a metol developer like microphen or perceptol used at high dilution to control the grain. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
europanorama
 Registrado: 27 Mayo 2012 Mensajes: 128
|
 Publicado: Jue Mayo 23, 2013 10:53 am Asunto: Promicrol |
|
 Publicado: Jue Mayo 23, 2013 10:53 am Asunto: Promicrol |
|
|
europanorama wrote:
I would try Promicrol. didnt develop B+W for decades. but that was THE developper for me. i was using replenisher.
It was gone from the market for some time since the producer could not get a certain ingredience anymore. seems to be back again.
Have seen it on the net.
I have a roll of polypan 90m to use.
There is another blog which has a review-showing its wonderful halo- its a blog with informations about new55(not the official one i suspect, maybe i err. search for new55 and polypan50 together. _________________ mpa |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|