| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
Aanything
 Registrado: 27 Ago 2011 Mensajes: 2187 Ubicación: Piacenza, Italy
Expire: 2014-05-30
|
 Publicado: Lun Mayo 27, 2013 11:20 am Asunto: M42 to minolta AF flanged adapter |
|
 Publicado: Lun Mayo 27, 2013 11:20 am Asunto: M42 to minolta AF flanged adapter |
|
|
Aanything wrote:
I'm Looking for a flanged adapter to use m42's on my sony alpha.
I already have tons on non flanged ones, but I have a couple of lenses without a/m switch that I'd like to use without opening them.
I remember those as quite common sometime ago, but in my latest ebay searches I couldn't find any.
Can anyone suggest me a place where I can find one?
Thanks. _________________ C&C and editing of my pics are always welcome
Samples from my lenses
My gear
My Flickr |
|
| Volver arriba |
|
 |
buerokratiehasser
 Registrado: 12 Jun 2011 Mensajes: 470
|
 Publicado: Lun Mayo 27, 2013 12:51 pm Asunto: |
|
 Publicado: Lun Mayo 27, 2013 12:51 pm Asunto: |
|
|
buerokratiehasser wrote:
If you dont mind losing infinity (or more infinity) you can use a short m42 distance ring with pinthroughpush and jam the push part with half a match.
The problem with this is that you are losing not only infinity, but well anything up to 4 meters, even with the shortest ring of 7mm or so.
Same with m42 teleconverter but the image may not be as good.
You can also try really good tape over the pin but that did never work out reliably with mine, the springs are just too good. |
|
| Volver arriba |
|
 |
Aanything
 Registrado: 27 Ago 2011 Mensajes: 2187 Ubicación: Piacenza, Italy
Expire: 2014-05-30
|
 Publicado: Lun Mayo 27, 2013 5:16 pm Asunto: |
|
 Publicado: Lun Mayo 27, 2013 5:16 pm Asunto: |
|
|
Aanything wrote:
Thanks for the tips.
I already jammed tens of stop down pins on my lenses, after trying all sort of possible solutions, the only one that kind of satisfies me is opening the rear part of the lens and jamming the pin.
And while I have little to none problems in doing that on cheap lenses, I would have liked a flanged adapter for the couple of (relatively) expensive m42's with no switch that I recently acquired, in order to avoid both messing up something with the lens when opening it and doing long term damage to the spring by keeping it permanently pressed.
One of them, my second flektogon 4/20, has a little tab on the barrel that stops diaphragm down when pressed, so I just have to remember to put an hand on it right before shooting, but sometimes it's a bit uncomfortable. _________________ C&C and editing of my pics are always welcome
Samples from my lenses
My gear
My Flickr |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Lun Mayo 27, 2013 6:06 pm Asunto: |
|
 Publicado: Lun Mayo 27, 2013 6:06 pm Asunto: |
|
|
kuuan wrote:
if you don't find any you could try a DIY solution similar to this one on a M42 > K adapter:
http://translate.google.com/translate?sl=ja&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&eotf=1&u=http%3A%2F%2Fwww.pentax-fan.jp%2FLENS%2FM42%2FM42AD.html _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Volver arriba |
|
 |
Aanything
 Registrado: 27 Ago 2011 Mensajes: 2187 Ubicación: Piacenza, Italy
Expire: 2014-05-30
|
 Publicado: Lun Mayo 27, 2013 6:34 pm Asunto: |
|
 Publicado: Lun Mayo 27, 2013 6:34 pm Asunto: |
|
|
Aanything wrote:
That seems a suitable solution. Thanks for the link! _________________ C&C and editing of my pics are always welcome
Samples from my lenses
My gear
My Flickr |
|
| Volver arriba |
|
 |
kuuan
 Registrado: 14 Ene 2008 Mensajes: 4569 Ubicación: right now: Austria
Expire: 2014-12-26
|
 Publicado: Lun Mayo 27, 2013 6:57 pm Asunto: |
|
 Publicado: Lun Mayo 27, 2013 6:57 pm Asunto: |
|
|
kuuan wrote:
most welcome, wish you best success  _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|