| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
guardian
 Registrado: 18 Mar 2009 Mensajes: 1750
|
 Publicado: Dom Mar 24, 2013 1:44 pm Asunto: On filter ring dents |
|
 Publicado: Dom Mar 24, 2013 1:44 pm Asunto: On filter ring dents |
|
|
guardian wrote:
I have a few thoughts on filter ring dents. First, they are a pestilence. I brought in a nice Hexanon 40mm f1.8 yesterday which has a dented filter ring. I knew about the dent at time of purchase, of course. But such dents are annoying.
eBay certainly has answers to this dilemma. Our Chinese friends, for example, are always eager to help us out:
Haz clic aquí para verlo en eBay
Do bring lots of money.
And here is another tool which costs less. I like it more:
Haz clic aquí para verlo en eBay
Not to diminish or demean the above, but I'm a believer in the old addage: "Free is cheap"
With the caveat I have access to a lathe (two, actually; a smaller Hardinge cataract lathe and a larger South Bend), and acknowledging that might constitute unfair advantage, I'm thinking in terms of a tool best described perhaps as a cone section. Made of wood, or maybe of plastic pipe, something softer than aluminum anyway, it would be lathe turned to a very gradual taper. After disassembling the lens you would insert the small end of the cone into the (dented) filter ring and force the ring up the cone, thereby removing the dent.
I realize the eBay solutions do not require lens disassembly. But often dented lenses need to be refurbished anyway. My Hexanon 40mm, for example, needs to be re-greased and the front element needs to be cleaned. And I'm not certain I'd be comfortable using either of those tools from eBay to remove a filter ring dent, working only millimeters away from a front lens element. One slip and it could be "good-bye lens"!!
So how do you fellows repair dented filter rings? |
|
| Volver arriba |
|
 |
kds315*
 Registrado: 12 Mar 2008 Mensajes: 16909 Ubicación: Kehl, Germany
Expire: 2021-03-09
|
 Publicado: Dom Mar 24, 2013 4:22 pm Asunto: |
|
 Publicado: Dom Mar 24, 2013 4:22 pm Asunto: |
|
|
kds315* wrote:
Well, my old repairman simply used a suitable round hardwood block (or would make one)
and a small wooden hammer or wood block, would fit the former into the lens front and use
the latter to tap on the bent front ring while turning the lens back and forth until the dent is
gone. I do the same and it works pretty well (if not bent too much and no crack) - at no cost  _________________ Klaus - Admin
"S'il vient a point, me souviendra" [Thomas Bohier (1460-1523)]
http://www.macrolenses.de for macro and special lens info
http://www.pbase.com/kds315/uv_photos for UV Images and lens/filter info
https://www.flickr.com/photos/kds315/albums my albums using various lenses
http://photographyoftheinvisibleworld.blogspot.com/ my UV BLOG
http://www.travelmeetsfood.com/blog Food + Travel BLOG
https://galeriafotografia.com Architecture + Drone photography
Currently most FAV lens(es):
X80QF f3.2/80mm
Hypergon f11/26mm
ELCAN UV f5.6/52mm
Zeiss UV-Planar f4/60mm
Zeiss UV-Planar f2/62mm
Lomo Уфар-12 f2.5/41mm
Lomo Зуфар-2 f4.0/350mm
Lomo ZIKAR-1A f1.2/100mm
Nikon UV Nikkor f4.5/105mm
Zeiss UV-Sonnar f4.3/105mm
CERCO UV-VIS-NIR f1.8/45mm
CERCO UV-VIS-NIR f4.1/94mm
CERCO UV-VIS-NIR f2.8/100mm
Steinheil Quarzobjektiv f1.8/50mm
Pentax Quartz Takumar f3.5/85mm
Carl Zeiss Jena UV-Objektiv f4/60mm
NYE OPTICAL Lyman-Alpha II f1.1/90mm
NYE OPTICAL Lyman-Alpha I f2.8/200mm
COASTAL OPTICS f4/60mm UV-VIS-IR Apo
COASTAL OPTICS f4.5/105mm UV-Micro-Apo
Pentax Ultra-Achromatic Takumar f4.5/85mm
Pentax Ultra-Achromatic Takumar f5.6/300mm
Rodenstock UV-Rodagon f5.6/60mm + 105mm + 150mm
|
|
| Volver arriba |
|
 |
Lloydy
 Registrado: 02 Sep 2009 Mensajes: 7880 Ubicación: Ironbridge. UK.
Expire: 2022-01-01
|
 Publicado: Dom Mar 24, 2013 5:07 pm Asunto: |
|
 Publicado: Dom Mar 24, 2013 5:07 pm Asunto: |
|
|
Lloydy wrote:
My home made repair jig is made from some scrap ABS plastic, the two main parts are held together with self tapping screws. The punch is also ABS, and is soft enough that it doesn't damage the filter threads, unless you hit it too hard. I sometimes run some electrical insulating tape over the end of the punch as well, that helps to keep the thread undamaged. There is tape around the rim of the cradle which helps to stop damage to the paint.
The cradle is about 58mm dia, the Tamron is a nice fit, but I repair smaller diameter lenses with this, I modify the radius of the punch with a file to suit smaller diameter lenses. Obviously for larger diameters I would need to make another cradle.
There is some foam rubber to support the lens, I just add a bit or take it away as needed. Having support at the back allows me to use the punch in one hand and the hammer in the other. I use a small hammer, lightly - don't try to straighten a lens ring all in one stroke with a big lump hammer!
I've had good results from this contraption, I did a Tokina AF zoom lens that had been dropped a few weeks ago for someone and got a filter to screw in easily. If suitable plastic isn't available then wood will be just as good.
I made this in a hurry to do a lens and was going to make a better job with different diameter cradles that slotted in to a base, and them make an adjustable support. But I didn't need to, this works just fine. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Volver arriba |
|
 |
peterqd
 Registrado: 28 Feb 2007 Mensajes: 7449 Ubicación: near High Wycombe, UK
Expire: 2014-01-04
|
 Publicado: Dom Mar 24, 2013 6:11 pm Asunto: Re: On filter ring dents |
|
 Publicado: Dom Mar 24, 2013 6:11 pm Asunto: Re: On filter ring dents |
|
|
peterqd wrote:
| guardian escribió: |
| I realize the eBay solutions do not require lens disassembly. But often dented lenses need to be refurbished anyway. My Hexanon 40mm, for example, needs to be re-greased and the front element needs to be cleaned. And I'm not certain I'd be comfortable using either of those tools from eBay to remove a filter ring dent, working only millimeters away from a front lens element. One slip and it could be "good-bye lens"!! |
The problem I've found too often is that the dented ring prevents the engraved ring from being unscrewed, so it's impossible
to get to the screws which mount the filter ring on the lens. If you can get the ring off then your cone seems a great idea, but
all too often it has to be repaired while still mounted on the lens body. _________________ Peter - Moderator |
|
| Volver arriba |
|
 |
guardian
 Registrado: 18 Mar 2009 Mensajes: 1750
|
 Publicado: Dom Mar 24, 2013 6:32 pm Asunto: Re: On filter ring dents |
|
 Publicado: Dom Mar 24, 2013 6:32 pm Asunto: Re: On filter ring dents |
|
|
guardian wrote:
| peterqd escribió: |
| guardian escribió: |
| I realize the eBay solutions do not require lens disassembly. But often dented lenses need to be refurbished anyway. My Hexanon 40mm, for example, needs to be re-greased and the front element needs to be cleaned. And I'm not certain I'd be comfortable using either of those tools from eBay to remove a filter ring dent, working only millimeters away from a front lens element. One slip and it could be "good-bye lens"!! |
The problem I've found too often is that the dented ring prevents the engraved ring from being unscrewed, so it's impossible
to get to the screws which mount the filter ring on the lens. If you can get the ring off then your cone seems a great idea, but
all too often it has to be repaired while still mounted on the lens body. |
This is superb thinking and I thank you for your post. I defer to your thought process here. I didn't think of that . . . but I should have!!
Oh, well. Back to the drawing board! Another "great idea" bites the dust.  |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|