MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Dead/Hot Pixel test Question
Ver tema anterior :: Ver tema siguiente  


Reply

I did a pixel test tonight using software Dead Pixel Test, with setting hot:60 and dead:250.

Result shown on below picture:


For example, last line on the right note paper means ISO=100, shutter=30s, hot pixel=2, dead=74

I did ISO 100 test again (on the right note) at the last of the test to double check.

There is at least two zero dead pixel on each ISO for different shutter setting. I am understand this as no FIX dead pixel on the camera. Am I correct? If I am right why is it so? Is the way I did the test reliable?

Machine for test: Canon 60D and Pentax 50MM 1.4 SMC


Reply

f@tte escribió:
I did a pixel test tonight using software Dead Pixel Test


when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try


Reply

fotkino escribió:
f@tte escribió:
I did a pixel test tonight using software Dead Pixel Test


when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try


I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?

Anyway thank you for providing the info.

However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not?


Reply

f@tte escribió:

I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?

Anyway thank you for providing the info.

However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not?


Yes, im 100% sure Smile you can try this whith lens or whithout. Its a realy works with my 5D and 5DmkII.

And you can google "canon remaping hot pixel" and read about "manual cleaning mode" and remaping.


Reply

http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/


Reply

fotkino escribió:
http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/

This is very helpful. Thank you!