| Ver tema anterior :: Ver tema siguiente |
| Autor |
Mensaje |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Dom Ene 27, 2013 10:53 pm Asunto: Agfa Copex HDP13 in Kodak Microdol-X part 7 |
|
 Publicado: Dom Ene 27, 2013 10:53 pm Asunto: Agfa Copex HDP13 in Kodak Microdol-X part 7 |
|
|
iangreenhalgh1 wrote:
This roll I exposed at ISO 100 as an experiment to see how it affected grain and tonality. I developed for 15mins in 1:3 Microdol-X at 25C and this seems about ideal, all my previous efforts with this film have been overdeveloped, and this was detrimental to tonality and grain.
EOS 10qd with Micro-Nikkor 3.5/55. The more I use this old Nikkor the more I like it, just a great lens.
#1
#2
#3
 _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
Attila
 Registrado: 24 Feb 2007 Mensajes: 58002
Expire: 2025-11-18
|
 Publicado: Dom Ene 27, 2013 11:19 pm Asunto: |
|
 Publicado: Dom Ene 27, 2013 11:19 pm Asunto: |
|
|
Attila wrote:
I think developing process is right if you wish better tonality try yellow filter, these are good ones! |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Dom Ene 27, 2013 11:44 pm Asunto: |
|
 Publicado: Dom Ene 27, 2013 11:44 pm Asunto: |
|
|
iangreenhalgh1 wrote:
Cheers. I think I've nailed down the correct dev times/temps now:
ISO 25 - 10 mins, 25C
ISO 50 - 12.5 mins, 25C
ISO 100 - 15 mins, 25C
I'll have to see if I have a Yellow filter to fit, I had a look for one the other day and only found a 40.5mm one, but I did find an orange filter. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
David
 Registrado: 13 Abr 2011 Mensajes: 1869 Ubicación: Denver, Colorado
Expire: 2013-01-25
|
 Publicado: Lun Ene 28, 2013 3:56 am Asunto: |
|
 Publicado: Lun Ene 28, 2013 3:56 am Asunto: |
|
|
David wrote:
I like the first shot quite a bit. Well presented and interestingly laid out. _________________ http://www.youtube.com/user/hancockDavidM |
|
| Volver arriba |
|
 |
Nesster
 Registrado: 24 Abr 2008 Mensajes: 5883 Ubicación: NJ, USA
Expire: 2014-02-20
|
 Publicado: Lun Ene 28, 2013 11:23 am Asunto: |
|
 Publicado: Lun Ene 28, 2013 11:23 am Asunto: |
|
|
Nesster wrote:
Yes, you hit the King Dick this time. Tonality is excellent. _________________ -Jussi
Camera photos
Print Photographica
|
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Lun Ene 28, 2013 12:28 pm Asunto: |
|
 Publicado: Lun Ene 28, 2013 12:28 pm Asunto: |
|
|
iangreenhalgh1 wrote:
Cheers guys. When I saw the name on that spanner I had to make it visible in the shot  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
skida
 Registrado: 02 Mar 2012 Mensajes: 1826 Ubicación: North East England
|
 Publicado: Lun Ene 28, 2013 3:12 pm Asunto: |
|
 Publicado: Lun Ene 28, 2013 3:12 pm Asunto: |
|
|
skida wrote:
| Nesster escribió: |
| Yes, you hit the King Dick this time. Tonality is excellent. |
+1
I like this result best. |
|
| Volver arriba |
|
 |
TVR
 Registrado: 19 Ene 2012 Mensajes: 97 Ubicación: Brandon, MB
|
 Publicado: Vie Feb 01, 2013 2:07 am Asunto: |
|
 Publicado: Vie Feb 01, 2013 2:07 am Asunto: |
|
|
TVR wrote:
just had to add i have some of those spanners "King Dick" whitworth use them on the sunbeam and norton |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Vie Feb 01, 2013 9:38 pm Asunto: |
|
 Publicado: Vie Feb 01, 2013 9:38 pm Asunto: |
|
|
iangreenhalgh1 wrote:
Glad you enjoyed the King Dick I think my dad has a full set of em, the small spanner on the left is also a King Dick.
Important to have Imperial ones, there's nowt metric on a 1950s Rover.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
Katastrofo
 Registrado: 26 Feb 2007 Mensajes: 10405 Ubicación: USA
Expire: 2013-11-19
|
 Publicado: Sáb Feb 02, 2013 12:43 am Asunto: |
|
 Publicado: Sáb Feb 02, 2013 12:43 am Asunto: |
|
|
Katastrofo wrote:
Yep, these are fabulous results!  |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Sáb Feb 02, 2013 1:05 am Asunto: |
|
 Publicado: Sáb Feb 02, 2013 1:05 am Asunto: |
|
|
iangreenhalgh1 wrote:
Cheers Bill. I'm going to try similar subjects with Kodalith shortly, I feel that film may be ideally suited for this sort of subject. I did shoot a roll of FP4 of the same subjects for comparison, but I shot it in the EOS so it will be very overexposed and I don't know what dev time to give it, so it might not come out any good. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
TVR
 Registrado: 19 Ene 2012 Mensajes: 97 Ubicación: Brandon, MB
|
 Publicado: Sáb Feb 02, 2013 2:10 am Asunto: |
|
 Publicado: Sáb Feb 02, 2013 2:10 am Asunto: |
|
|
TVR wrote:
your Dad has a P 4 i spotted right away just picked up a 69 P6 TC great cars never had a ride in P4 i know where there is one for sale very tempting.........enough on cars at least cameras are cheaper and don't tale up as much room |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mar Feb 12, 2013 12:01 pm Asunto: |
|
 Publicado: Mar Feb 12, 2013 12:01 pm Asunto: |
|
|
iangreenhalgh1 wrote:
Yes, 1958 Rover P4 110, has a straight 6 with twin inch and 3/4 side-draught SUs, makes a glorious noise. What i like about it most is how you feel riding along in it, floating on those big soft cart springs, you feel like royalty.
Good luck with your new purchase, does she need a lot of work or is she already restored? _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
TVR
 Registrado: 19 Ene 2012 Mensajes: 97 Ubicación: Brandon, MB
|
 Publicado: Mar Feb 12, 2013 10:35 pm Asunto: |
|
 Publicado: Mar Feb 12, 2013 10:35 pm Asunto: |
|
|
TVR wrote:
here is my first TC a 68 we drove on the Bonneville Salt Flats it was so flat you can see the curvature of the earth
this my present car came from Victoria traded my TVR Tasmin for it just making new door panels and replacing some of the window rubber otherwise very presentable
 |
|
| Volver arriba |
|
 |
iangreenhalgh1
 Registrado: 18 Mar 2011 Mensajes: 15679
Expire: 2014-01-07
|
 Publicado: Mar Feb 12, 2013 10:54 pm Asunto: |
|
 Publicado: Mar Feb 12, 2013 10:54 pm Asunto: |
|
|
iangreenhalgh1 wrote:
Those are very nice Rovers, they were common here at one time, I think the 2500 version was very commonly used by the police force. Don't they have bolt-on replaceable body panels? Good luck with the restoration, I know it requires patience. I'd love to visit Bonneville one day, preferably with a suitable car.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Volver arriba |
|
 |
|
|
|
No puedes publicar temas nuevos en este foro No puedes responder a temas en este foro No puedes editar tus mensajes en este foro No puedes borrar tus mensajes en este foro No puedes votar en las encuestas de este foro
|