MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Fungus, cold cream won't help this!
Ver tema anterior :: Ver tema siguiente  


Reply

This element is out of an old Tokina 70-210 zoom. I could see that only one element had fungus so I thought I'd try and clean it.




I was wasting my time and effort, the fungus had formed a hard layer that the cold cream removed, but the etching of the glass is total on both sides. The surface of the element is so deeply etched that when I tried to scratch the surface with the tip of a screwdriver, it acted like an abrasive and made a mark on the hardened steel !

This shows the damage fungus can do when left too long before cleaning or at least killing.

It was no loss, the lens was a freebie and junk anyway. Rolling Eyes


Reply

If you wish to save it bring to an optician to polish etched surface and enjoy your lens.


Reply

Hmmm... our friends the astronomers use Cerium oxide to make
their lenses optically ground/clean. All coatings will be destroyed, but...

Cerium oxide is available at lapidary stores and similar.


Reply

The lens is of no importance at all, it was junk with a bent filter ring and the rubber grip missing without this fungus. I just thought I'd post it to show how bad the etching can be. And that was the only element affected, all the others were perfectly clean. That one is so bad that even held close to my eye I can't read normal type through it.


Reply

Lloydy escribió:
The lens is of no importance at all, it was junk with a bent filter ring and the rubber grip missing without this fungus. I just thought I'd post it to show how bad the etching can be. And that was the only element affected, all the others were perfectly clean. That one is so bad that even held close to my eye I can't read normal type through it.


Lloydy, if you want to give a try, please use vitroceramic cleaner (the one used in the kitchen). It has saved some lenses for me.
Of course, the coating will probably be removed, but as you show the lens, it's already damaged for sure.
Good luck.

Jes.


Reply

This element is past any repair, you can physically feel the etching with your fingertips. I shall try a more powerful macro! Wink

here we go, I have no idea what the magnification is. I'm using a Miranda 75-200 Macro that does 1:10 with a Tessar 50 reversed on the front. Whatever that gives me I don't know, but it's quite a lot. Wink

On these pictures you can see the acid etching, the surface of the glass ranges from deeply pitted in a pattern that would be considered 'organic' to a texture similar to frosted glass on a bathroom window, simple undulations.

This is a crop of the picture above, the etching is very obvious.


This is just another picture of a different portion of the lens.


So then I thought I would try a 'good' lens to compare the lapping marks to the fungus etching. A good lens is a hard thing to photograph the surface of, so I found a scratched lens in the box of crap under the desk, at least I could focus on the scratches.

And it's quite apparent that the surface is very different, the manufacturing lapping is invisible - to my standard of macro anyway!

The degree and type of damage done by the acid etching of fungus is incredible, that bad lens element is utterly useless. To take these macro shots I light the bad element from the side but between the camera and the element. The 'good' lens I had to backlight with a LED torch. That's how much the bad element is destroyed.


Reply

Excellent photos of horrible destruction. Sorry to see it.

I have a few lenses with fungus I thought I might be able to save. Now I'm less certain. That stuff is pernicious!! Twisted Evil