MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Agfa Copex HDP13 in Kodak Microdol-X part 5
Ver tema anterior :: Ver tema siguiente  


Reply

Fifth attempt, same EOS 10qd and Micro-Nikkor 3.5/55 as before, again exposed at ISO 25 and developed in 1:3 Microdol-X. Only difference this time was a reduction in development time from 20mins to 18mins.

These were shot at around 3.30pm as snow was falling, the light was the worst possible, by any normal rationale, a useless situation for any kind of photography. Well, even though I had to make some exposures of 30secs at f3.5, I think the results are astonishing given the lack of light.

#1

#2

#3

#4

#5

#6

#7


Reply

Not really come throw in small jpg , how sharp , how no grain I see #4 in big, I was amazed , well done Ian!


Reply

Cheers Smile

I've had this Micro-Nikkor for over a year and not used it much before, I'm coming rapidly to love it, just a great lens, I think I paid 30ukp for it, which I consider a big bargain considering it's abilities.


Reply

Here's a 100% crop from #4. Grain is pretty much invisible and the sharpness exceeds what my scanner can record, the scanner can do 70lp/mm max, but the lens and film can record probably twice that figure, maybe a little more. This was a 30 second exposure at f5.6, seems my Velbon tripod is pretty stable and the mirror damping in the EOS 10qd is pretty good because I see no shake, there was no wind either, luckily.



Reply

Best results by far, well done! Cool


Reply

Cheers Bill, I was overdeveloping by a lot before, which made them very hard to scan and get nice tonality, even this roll looked too dense so I'll try to reduce the development time further.