MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Metering modes.
Ver tema anterior :: Ver tema siguiente  


Reply

Apologies for such a basic question. But while shooting high contrast scenes, especially with lenses wider than 24mm metering is quite tricky. I was just wondering what metering modes most people are using for such scenes. This problem is most prominent in ultra-wides such as 10-24 or 11-16.

I know it is possible to apply variable/gradual exposire compensation in LR to make it better, but it would surely be better to capture it right.

Any thoughts?


Reply

Hm... Not a basic question at all!
In such situations, I would try spot metering
a grey card. If really tricky, expose for 0, -1, +1
and have a go at balancing layers Photoshop/Gimp &c
(which is quite an interesting technique).


Reply

twinquartz escribió:
Hm... Not a basic question at all!
In such situations, I would try spot metering
a grey card. If really tricky, expose for 0, -1, +1
and have a go at balancing layers Photoshop/Gimp &c
(which is quite an interesting technique).


Thanks mate! Yes, the spot and centre metering options are there. But they're ok if you want to meter for a specific object. I guess your other suggestion about stacked/bracketed exposures sounds good. So kind of like HDR.


Reply

The answer would depend on what DSLR body you are using. Say, if you are using a DLSR which has 1,005 grouped RGB sensors it uses for metering, it will produce less accurate matrix metering results than a DSLR which uses 91,000 individually metering RGB sensors.

The physical amount of RGB sensors is only part of the truth: 100,000 grouped RGB sensors gives less accurate results than 91,000 individually registering RGB sensors. This matters little to most, but those who need TTL flash or for example shoot in aperture priority mode will very soon find out what marketing departments and Dpreview rarely remember to tell you, when they compare DSLRs.

Furthermore, not all DSLRs rely on metering data only, newest models from all major manufacturers combine metering data with a scene interpretation databank of tens of thousands of pre-programmed lighting setups most commonly found, then they give you their metering suggestions when shooting in Program or Aperture priority mode, or using TTL flash.

Finally, some bodies can compensate for the vignetting wide open, while others can't - 1st party lenses usually don't suffer from metering issues while glass used with adapter users may find they have to use EV +1 for accurate results (lens is wide open when metered). Don't know if this makes any sense to you, I tried explaining it in a language that isn't my mother tongue...


Reply

Esox lucius escribió:
The answer would depend on what DSLR body you are using. Say, if you are using a DLSR which has 1,005 grouped RGB sensors it uses for metering, it will produce less accurate matrix metering results than a DSLR which uses 91,000 individually metering RGB sensors.

The physical amount of RGB sensors is only part of the truth: 100,000 grouped RGB sensors gives less accurate results than 91,000 individually registering RGB sensors. This matters little to most, but those who need TTL flash or for example shoot in aperture priority mode will very soon find out what marketing departments and Dpreview rarely remember to tell you, when they compare DSLRs.

Furthermore, not all DSLRs rely on metering data only, newest models from all major manufacturers combine metering data with a scene interpretation databank of tens of thousands of pre-programmed lighting setups most commonly found, then they give you their metering suggestions when shooting in Program or Aperture priority mode, or using TTL flash.

Finally, some bodies can compensate for the vignetting wide open, while others can't - 1st party lenses usually don't suffer from metering issues while glass used with adapter users may find they have to use EV +1 for accurate results (lens is wide open when metered). Don't know if this makes any sense to you, I tried explaining it in a language that isn't my mother tongue...


Thanks very much for such a detailed explanation. Your language is absolutely fine (although it can't fully cure my ignorance about sensors!). I'm using nex5 and Sony a580. But can't easily find the information about the group metering sensors as they are not mentioned in the reviews as you point out. In general, I'm mostly happy now when shooting portraits as I use centre and spot metering. But the problem is mostly with landscapes. I think rather than using semi auto modes I should try experimenting with manual modes. Also will try stacking.


Reply

If I really want the picture and the exposure is difficult I try all the three - spot, average and center. And if I think that hasn't got it, I start bracketing. It's digital, we aren't paying by the shot like we did with film. But it is hard to get out of the habit of not shooting 'just in case' shots.


Reply

There's nothing like a good ole hand meter... Wink


Reply

With landscapes I tend to usually expose towards the highlights, unless there's something in the shadows I deliberately want to feature. Under-exposed areas of the image can often be recovered to an extent in PP, but with blown highlights it's impossible.

Do you use the AE lock feature on your camera? For me it's the most useful gizmo next to focus peaking.


Reply

If forced, I use in-camera Average Metering -- for landscape, meter with horizon in middle, then re-frame for shutter press.

I can camera-meter a grey card or my hand in the same light as the landscape.

An incident light meter is best way to measure light to calculate proper exposure. Wink


Reply

bhargav escribió:
I'm using nex5 and Sony a580. But can't easily find the information about the group metering sensors as they are not mentioned in the reviews as you point out. In general, I'm mostly happy now when shooting portraits as I use centre and spot metering. But the problem is mostly with landscapes. I think rather than using semi auto modes I should try experimenting with manual modes. Also will try stacking.


I think your cameras are fine, they're just doing what they're told: as DSLR sensors tend to save more shadows than highlights, they are a bit conservative. "Better slightly under-exposed than a tad over-exposed" seems to be what the engineers think.


Reply

On nex5, you can adjust dynamic range to level 5. That will cover the most. If you don't like the outcome, adjust with black level later on PP. My normal setting is level 3.

I shot in the cold and snow half of the year. Depends on the subject, I use mostly Av modes and switch between spot, center weight or average meter, and keep EV available in one of custom buttons/wheels. As in extreme cold, the camera light meter and the LCD may not be accurate, then manual mode is the way to go. Histogram is a good aid. Av mode in the cold may need +1.3

If the scene is relatively even light, -0.3 ev may be used to capture the high lights and increase fill light in PP to even out.
Snow scenes, dark subject, upto +1.0 ev or even +2.0 ev.

Canon dslr becomes funny around -8 celcius, with +1.0 ev.
So far I have only use pentax dslr in -18 celsius for days without problems, still need to compensate with +ev but not as much.


Reply

Cita:
If forced, I use in-camera Average Metering -- for landscape, meter with horizon in middle, then re-frame for shutter press.


Cita:
On nex5, you can adjust dynamic range to level 5. That will cover the most. If you don't like the outcome, adjust with black level later on PP. My normal setting is level 3


Cita:
Under-exposed areas of the image can often be recovered to an extent in PP


Cita:
for landscape, meter with horizon in middle, then re-frame for shutter press


Thanks Hoan, Esox, visualopsins and Peter! That is mostly what I do on both my Sony cameras and during pp. I also use AE lock feature but not very frequently, that is a good suggestion too.

Cita:
DSLR sensors tend to save more shadows than highlights, they are a bit conservative. "Better slightly under-exposed than a tad over-exposed" seems to be what the engineers think


And, yes that is what happens most of the time! The problem is more prominent as I say in really ultrawides towards twilight or early morning.

Cita:
If I really want the picture and the exposure is difficult I try all the three - spot, average and center. And if I think that hasn't got it, I start bracketing. It's digital, we aren't paying by the shot like we did with film. But it is hard to get out of the habit of not shooting 'just in case' shots


Cita:
If the scene is relatively even light, -0.3 ev may be used to capture the high lights and increase fill light in PP to even out.
Snow scenes, dark subject, upto +1.0 ev or even +2.0 ev.


Thanks David and Hoan, that is what I should try to do next!

Cita:
There's nothing like a good ole hand meter..


That is true Orio! I have a Weston Master V, but haven't really figured out how to use it, and maybe too complicated for my simple mind!