MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

Any opinions on HELIMAX-XP?
Ver tema anterior :: Ver tema siguiente  


Reply

I'd appreciate hearing opinions on HELIMAX-XP, especially if you have used this grease:



Haz clic aquí para verlo en eBay

This ships worldwide. It is not cheap, but it also is under US$10 so it is affordable for many.

The part of their write up that struck me especially was what they wrote about odor. They said if you can smell (whatever) grease it is wrong for lenses because you are smelling volatile substances which eventually will end up coating the lens elements. I found that an interesting test which seems to make sense.


Reply

Pursuant to this, I am just off the telephone with the applications engineer at Lubriplate. Thought they might make a grease for this application, helicoids. No dice. Helicoid grease is simply not their thing. The gentleman at Lubriplate suggested I contact Dow Corning, but accessing an expert there is less straightforward than at Lubriplate.

Apparently PTFE acts to hold onto the oil so it does not drop out and run, for example, onto the aperture blades. Lubriplate does not make a grease with PTFE. Dow Corning does, but their specialty products are darned expensive and, after review, I'm not at all sure their PTFE grease is appropriate anyway.

Guess I'm about ready to spend the money and buy an ounce of the subject grease. This does not appear to be something I can finagle on my own, or work around. Using the wrong grease owing to failed guesswork would appear at best unwise at this point, perilous at worst. Sometimes one simply must bite the bullet.


Reply

Bought a tub of HELIMAX-HP. They shipped the same day I ordered. Used it to grease a lens.

I'm pleased with my outcome and with the product. But I have to say, this one small tub is going to grease a really large number of lenses.

A tiny bit of this stuff goes a long, long way. Smile


Reply

Nice find! Many thanks to sharing it!

I did fix your list , ebay listing will be gone 90 days later, picture is help to identify to late readers. I did also fix silly long url, right format is :

[ebay]271052175856[/ebay]


Reply

Attila escribió:
Nice find! Many thanks to sharing it!

I did fix your list , ebay listing will be gone 90 days later, picture is help to identify to late readers. I did also fix silly long url, right format is :

Haz clic aquí para verlo en eBay


Thank you, Attila, for your very kind assist.

Yes, I see now the eBay option up above. Never noticed it prior. Will use it in future and try to post properly.

Thanks again!

This is an American company though they ship literally all around the world. I'm not sure how long this stuff will continue to be available if they rely primarily on American sales. It appears (to me) lens repair experts are more readily found outside America than here, which if true is a shame. It also would account for their very broad embrace of foreign sales. But this grease, just a tiny amount, goes so far and you need so little to do a good job. I just don't see how they will sell enough to remain in business selling for only US$10 (or less) per tub.

I have greased two lenses so far almost entirely from the grease which sloughed over onto the inside of the tub cover. Smile

ETA

BTW I did find this grease to be odorless. IMO that is a good thing for grease used inside lenses.


Reply

I bought two boxes of HELIMAX-HP for $4.99 each. As guardian said, they shipped it very quickly.

It took 11 days to be delivered in Switzerland but the company is located near New-York and the huricane Sandy blocked all flights several days.

I have cleanned and greased a CZJ Tessar 50mm 1.8 full of sand and I'm very happy with the result. The focus ring is now smooth and precise.

The odor of this grease is very very light, almost odorless.

One box of HELIMAX-HP should be enought for hundreds of lens greasing.


Reply

Thanks for the info. Just bought one.
That ebay store seems to offer quite a lot
of different greases/lubricants.


Reply

I'm pleased this is working out for you fellows.

Yes, the hurricane Sandy devastation is almost unimaginable. It is nearly beyond belief.

Oh my goodness, they really do offer a great many different specialty greases! I had not looked at those other offerings prior.

They offer a number of Dow Corning specialty products which, as I mentioned earlier, the engineer at Lubriplate had suggested I pursue.

However, it seems to me these people, being in the specialty grease business, know more about this than I do. Since they are selling Helimax specifically for helicoids, and since I've already bought a tub, I'm satisfied to stay with this product. Also it continues to appear as if one tub is going to last a long, long time.

I am impressed with their high vacuum grease offering, though. That would probably have been my second choice. A high vacuum grease is going to have a very, very low volatility. Of course, so does Helimax.