MFlenses - Una nueva vida en la era digital
MFLenses 2026

Foro de objetivos de enfoque manual

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.

Explora el mundo de los objetivos antiguos mediante notas de reparación, pruebas reales e hilos de archivo llenos de imágenes.
Destacado

Espacio de socio destacado en la portada del foro.

NX100 and wireless flash control
Ver tema anterior :: Ver tema siguiente  


Reply

Hi folks

I bought one of these and three receivers:

http://www.ebay.co.uk/itm/Wireless-Flash-Trigger-PT-04-TM-4-channel-transmitter-/221068342662?pt=UK_Photography_Slaves_Trigger_Systems&hash=item3378b33586#ht_2891wt_1163

I set up the receiver with a flashgun and put the transmitter on my NX100. Nothing, didn't trigger the flash. However, pressing the button on the transmitter and it does trigger the remote and fire the flash. I tried the flashgun direct on the NX100's hotshoe and the flash does fire.

I tried putting the transmitter on my Pentax MV1 35mm SLR and that works, it triggers the remote and fires the flash.

So anyone got any idea why the NX100 isn't operating the transmitter?


Reply

I experiencd the same thing. I gues it has to doe with the extra contact other that the central one confusing the camera when the trigger is mounted.
Haven't tried is but 'disableing' them
with some tape could help.....


Reply

If you're using auto or p mode, your shutter speed may be too fast for the pt trigger.
I use the same trigger/receivers on my nx10 - switch to m ( or s) and try a shutter speed of 1/180 or less. I've been getting great results from mine with a couple of cheap, old-school eBay-sourced strobes hooked up to these receivers